Hey it me again in taiwan gun there is a combo FLAT HOP UP BUCKING 55-60° [MODIFY] or is it better to buy maple leaf 60 and the DELAYER OMEGA [MAPLE LEAF]
So miss feeding can sometimes be attributed to the magazine spring and how it feeds, sometimes when you have heavy BBs and a weak magazine spring, you will have issues where your AEG might be shooting too fast and your mag can't feed in time. As for how its shooting three at a time, thats a questions I don't know myself - Marck
we wanted to get some of the basic, most popular options out of the way first so people can have a base level understanding of what's inside their gun. we area always taking suggestions for our next season - Marck
I have a question about installation. Upon seating the bucking on my inner barrel (pdi 6.01) I try and put the hopup over it and notice the the bucking stretches and I notice that when i put the clip on the hopup the bucking gets pinched inbetween. Is this due to not using silicone oil on a softer bucking?
We would recommend you put just a little bit of silicone oil on the base of the bucking and slide it in, that should do the trick. Also, the type of gun sometimes plays a part as some hop up chambers are quite tight.
Ah I see but now I have questions about the hop up bucking that I have I purchased an inner barrel and hop up bucking from them as a combo and now u got me questioning if their hop up is good for my 390-400 fps bcm lol
Also take into account the different dimensions of chambers and barrels. This is kind of a great rule of thumb to give you a baseline level of info how to get the most out of your AEG - Marck
Hi I upgraded my TM USP full size with 6.03mm tight bore barrel and purple VSR bucking and have my hop up set to maximum but the gun could not lift more than 0.25g bbs. I'm using lower power gas. What could I do to lift at least 0.3g bbs?
I really like that purple one and use it in every of my guns
And do you have regular one or the flat hop one? And which nub are you using?
So that purple one is made for Japan, the other two colors would be too strong?
The red one would be good too if you lived further up north or if wherever you are gets cold
Just installed the blue(60 degree) one in my 416 ngrs, along with the pdi 6.01 tbb. I got to say, I am not disappointed ; )
How much joule and which weight of bb you use？
@@黃堯-p1r approx 1 joule with. 30g
@Gchang54 it won't fly a bit slow？but did you change hop up arm？ cuz i also thinking use it with 0.25 or 0.28g bbs
@@黃堯-p1r it may seems slow, but in actual use I don't see much disadvantage. Between those 2, .28 for sure.
Hey it me again in taiwan gun there is a combo FLAT HOP UP BUCKING 55-60° [MODIFY] or is it better to buy maple leaf 60 and the DELAYER OMEGA [MAPLE LEAF]
Can I use a 70 degree decepticon bucking with a 265 mil 6.03 nitroflon coated brass inner barrel for tm gbb guns by unicorn airsoft with a tm mws
PLEASE DO A GAS BLOW BACK SEASON PLEEEEEEEAAAAAAASSSSSSSEEEEE
What would be the root cause of an aeg shooting 3bbs per trigger pull and overall miss feeding issues
So miss feeding can sometimes be attributed to the magazine spring and how it feeds, sometimes when you have heavy BBs and a weak magazine spring, you will have issues where your AEG might be shooting too fast and your mag can't feed in time. As for how its shooting three at a time, thats a questions I don't know myself - Marck
Very good information!
Also what is that aeg in the video? The color scheme looks amazing
Thats a Krytac Trident MKII with a killer Cerakote job
@@LayLaxInternational thanks for the info guys ima try that paint job on my bcm
No mention of hopup mound / patch type? :(
we wanted to get some of the basic, most popular options out of the way first so people can have a base level understanding of what's inside their gun. we area always taking suggestions for our next season - Marck
Sir how to upgrade the WE 1911 A AIRSOFT PISTOL
I have a question about installation. Upon seating the bucking on my inner barrel (pdi 6.01) I try and put the hopup over it and notice the the bucking stretches and I notice that when i put the clip on the hopup the bucking gets pinched inbetween. Is this due to not using silicone oil on a softer bucking?
We would recommend you put just a little bit of silicone oil on the base of the bucking and slide it in, that should do the trick. Also, the type of gun sometimes plays a part as some hop up chambers are quite tight.
@@LayLaxInternational yes I use a maxx m4p and notice that the blue flat bucking you guys make slides right into place with no issue
Ah I see but now I have questions about the hop up bucking that I have I purchased an inner barrel and hop up bucking from them as a combo and now u got me questioning if their hop up is good for my 390-400 fps bcm lol
Also take into account the different dimensions of chambers and barrels. This is kind of a great rule of thumb to give you a baseline level of info how to get the most out of your AEG - Marck
E muita gente usando o roxo nas DMRs 😂
Hi I upgraded my TM USP full size with 6.03mm tight bore barrel and purple VSR bucking and have my hop up set to maximum but the gun could not lift more than 0.25g bbs. I'm using lower power gas. What could I do to lift at least 0.3g bbs?
Hi Adam, feel free to shoot us a message on our Facebook and we will help you over there