How To Disassemble Entire Dash on 2022 Toyota Tundra...Step By Step, Perfect For Customizing/Wiring!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- step by step guide on how to take entire dash apart on a 2022 Toyota Tundra, much easier than it looks...if you want to customize panels, or need to run wiring, this will show you how to remove all panels to do so...thanks for watching!
Channel Partners/Discount Codes
xtrusion-overl... Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.co...
Discount Code- NitroZ18Fishing
carlinkitcarpl... Code- Z18
carpuride.com/... Code- Z18
screenprotech.... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?r...
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerus... Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire... Code- IFISH2248
www.YOLOtek.co... Code- NitroZ18
billettiedowns... Code- NitroZ18
www.shinearmor... Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?... Code- JUDGE10
Great video! Thanks for taking the time to do it. It saved me time and almost certainly damage to my vehicle if I had had to experiment with disassembly when installing switches and routing wiring harnesses for after market lights....
Thanks man!...glad it was helpful, I appreciate the support!
Thank you so much for producing this video. You saved me from breaking a ton of clips!
No prob, happy to help!…thanks for watching!
Do you know if you are able to replace the top part of the dash above the speedometer/center touch screen? I would like the leather one like in the platinum/capstone vs the plastic one on the TRD Pro. If you can or have, a video on that removal would be awesome! Thank you!
Reminds me of when I rewired my 33' SeaRay dash panel. Swore I would never do it again but with your video I may just do it again if need be on my 2022 TRD Sport. Good job Brother!!
Thanks man, I appreciate it!!...lemme know if I can help with anything!
Good work!! Maybe next time you will taking the engine apart
Thanks man, I appreciate it!…not sure about the engine, but stay tuned for the intakes and charge pipes, we’ll be changing those out in the very near future!…charge pipes are already here, waiting on the intakes to get delivered!
Bro that’s a lotta work. Thank you for the time you took to make it 🤝🏽
It's like a giant Lego set everything just snaps together. Now if you can come up with a way to make that 14" screen fit into my 2020 Tundra Trd Pro.
Hahaha…that would be sweet!…and that’s basically what it is, all the panels just snap together with a couple bolts mixed in…thanks for watching Joe!
I wouldn't attempt to do this, but kudos to you for helping others.
Happy to help!…it’s honestly not as bad as it looks, thanks for watching!
hell yeah! Thank you! planning to add aftermarket wiring/lights on my base tundra. I'm always scared of breaking the plastic tabs. Good reference
No prob, thanks for watching!…it’s honestly super easy to do this whole process, much less intimidating than it looks!…lol
Interesting… I was always wondering if it was possible to replace the 8 in screen with the 14 in screen in my SR5, and seeing how these are mounted that might actually be possible. Thanks for putting in the massive effort for this video!
No prob, thanks for watching!!…let me know if ya ever try to make the swap!…wiring may be different, but I’m honestly not sure….would be a heck of an upgrade!!
It does look possible, just a matter of the connectors. Would love to find out
Have you tried yet? I managed to get a 14” screen and everything is a direct fit. The vents can fit inside the vent Frame on the 14” screen but it’s not a perfect fit. But the 14” screen functions perfect just like the 8” screen. The only problem is I could not adjust the volume. Not even with the steering wheel buttons. You need the climate control panel and the wiring harness that plugs from the back of the volume knob to where ever it plugs in at.
Great video. I was wondering when you were going to rip your new dash apart
Thanks man!… Yeah, didn't take me long to start tearing things apart on the new truck 🤣
Thanks for putting in the work for us! Had to take apart a lot of the dash to mount my switch controller and this could’ve saved me so much time lol
No prob, happy to help!…thanks for watching!
Grat video I was really hoping that I would get to see access to those speakers there in the dash but I guess I'll have to fumble around with that myself.
Thanks man, I appreciate it!… do you mean the speakers up on top of the dash by the windshield?… If so, they’re super easy to access… Take a plastic pry tool and pop the cover off, and they are right there, hope that helps!
Crazy amount of work! Smart though I don't know any one out there that has a video on this. You will be monetizing this video for years to come. Great way to pay for that pro!
I love doin this stuff! 🤣…it’s honestly not bad at all, if I wasn’t makin a video I can tear this whole thing apart and put it back together in a half hour, maybe less….looks way worse than it is, thanks for watching!
@@NitroZ18Fishing you are one of a kind bro!
Thanks this helped
Good stuff. Will help with my audio upgrades.
This is amazing. Is that possible to do a quick video show how to take out/slide off the rear mirror cover, i try to install a mirror tap for the radar detector on the tundra trd pro 2023. Thank you
Thanks for detailed instructions. ca you do the video fuse panels under the hood? i like to see the fuse and relay locations. thanks
I learned so much from the video. Thanks!
That's awesome, thanks for the feedback!… Appreciate all the support!
Great video! If Taco Tunes ever comes out with their JBL upgrade system I might need some of this info.
Thanks Paul, I appreciate it!!
After all this, am I able to lift the dash up? I need to replace the passenger side dash airbag
Hey there, I'm trying to find how hard it is to replace the center console storage box, do you have that breakdown? I was broken into last weekend, and they crowbar'd and split my console trying to get into my safe. I'm looking to replace the broken parts, but don't know how to get down to that level yet. Your stuff is good for taking the stick shift area apart, but do you have one of taking one of the box out? The box that the safe is sitting in. They broke/split the side of that on the passenger seat side.
Can u do a video on a pillar removal
Yea absolutely! I’ll add it to my upcoming videos, happy to help!
I just did this a couple weeks ago. The vents will cut the crap out of you, be careful.
Thank you for making this video.
No prob, thanks for watching!
Great video what a puzzle! Can I request you do the door panels next? I have a rattle Id like to track down
Yea absolutely!…I’ll get that done asap, they’re pretty straight forward as well, thanks for watching!
th-cam.com/video/bkviDfSi__4/w-d-xo.html
Sir,,Can i have the part # for the ac vent connected to the screen please,,tq
Amazing video, thank you !! 😁👍
Thanks man, I appreciate that!!
Will you do a video taking out the map light/sunglass holder and also accessing the back window? I believe my rattle up front is the wire that is there for the dash cam and I think have another wire rattling inside the back window.
Yea absolutely, I'm going to be taking that off anyway to see about swapping the led chips in there, I'll definitely make a video on the map light area!...and I'll add the rear window to my list as well, can't make any promises that I'll get to that one really soon, I have a ton of videos lined up, but I'll get it done for ya!
I am trying to install a Course Motorsport phone mount and I can’t figure out how to install. Any suggestions, will it work with a 2023 Sequoia
Is it possible to change the interior of the Tundra 2018 to 2023 I have a Tundra and I want to change its interior
Is the clear glass for the digital dash removable as well?
Looks like there are 11 ports. Were all the ports occupied by a connector? The 8in model has 10 ports, all the same but missing one.
All the ports except one had a connector…I’m gonna make a short video showing the back of the unit up close, there’s been a few questions on possibly switching 8” screen to the 14” and what connections are different…thanks for watching!
Very cool! Thank you for this. I’ve taken apart some of these parts on the drivers side unsuccessfully tracking down a nasty rattle. Can the top of the dash (leather on my 22 platinum) be removed?
Thank you, I appreciate it!…the top of the dash can definitely be removed, it’s just some extra steps…I’ve actually never removed that part before but I’ve seen it done…just a little more involved, thanks for watching!
What an amazing video! Thanks for detailed instructions.
I’m about to install a Carlinkit box and want to put the device in the glovebox while running the USB-A wire to where you detached the dash at 11:37. What panels and pieces would you recommend on taking out to minimize the tear down?
Thank you, I appreciate that!!
And I have actually relocated mine to the glove box as well, I'm going to make a video showing exactly what I did, it's completely hidden!
@@NitroZ18Fishing I have my box coming tomorrow along with an angled USB-A to USB-C. Planning on fishing it through the little opening right below the bottom right corner of the screen, we’ll see how it goes.
Any chance you are going to have that STL available, not so much for the holder but the replacement piece itself? @7:07
Thank you for making this very informative video! Not sure if it's been mentioned yet, but Crutchfield has an open request for disassembly videos like this, not sure if they pay for content but with your step-by-step video, you definitely should. -- I'd like to relocate the front USB under the 14 in. monitor (the piece at the 25:26 mark), is it absolutely necessary to disassemble both driver's and passenger's sections or can I work up from the center console? Thank you again!
Thanks man, I appreciate that!!...I'll have to look into that, I've never heard of Crutchfield but I'll look em up, thank you!...and yea you don't have to do the whole dash for that USB, I actually have a video coming out showing how to do exactly that!....I moved/hid my Binize box cause my OCD couldn't handle it 🤣
Oh, and I can relate to the OCD thing, my wife says that what I have is called "anal-retentiveness" and relocating the USB is a must because I can't come to terms with using that front port.
@@BLASTech they just dont understand our struggles! 😂
I get to do the evaporator, you only did the fun part 😢
I wonder if the piece at 11:35 could be interchangeable with the "pocket dash" found on the lower trims. That empty area drives me nuts in my Limited and would much rather have extra functionality. Thanks for a great video!
I don’t see why it can’t to be honest!…I think all the trim levels go together the same way in that area, let me know if ya pull the trigger on it!
Not sure I'll ever have to take this apart, but this is a great video to show just how to do it! Side note .. do you have the .stl file available anywhere for the phone mount? I'd love to print that for my truck!
Thanks man, I appreciate it!!...I'm gonna tweak the stl a little more, a couple things I don't quite like about it just yet...as soon as I get it perfect I'll let ya know...haven't decided if I'm gonna sell them or not, I've put a ton of time into that darn thing, my OCD won't let up! 🤣
@@NitroZ18Fishing Agreed! After going through many iterations on the TRD Off Road grill camera bracket that my buddy and I designed, we even altered it after printing and using on my grill swap. It's a never ending cycle!
I'm glad someone understands! 🤣...my OCD is gonna be the death of me!...lol
@NitroZ18 Fishing That was a great video. Do you have any suggestions on running wire from USB to glove box. I have a 23 Capstone with a Binize Box that I want to put in glovebox
Thanks Jesse!...stay tuned, I've had several ask about how I hid the Binize, I'll be posting a video showing exactly what I did!
@nitroz18 fishing where do you get a black center emblem overlay ?
I got mine off Etsy but unfortunately the company doesn't make them anymore...I believe they have them on eBay!
Where can I get the trd pro foot step protector?
That's from Tufskinz, use code Nitro10 to save a few!
Where did you get the black overlay for your steering wheel logo?
Got it off Etsy but unfortunately the company I got mine doesn’t make them anymore
Where did you get the overlay for the steering wheel?
Got that off Etsy, but the company I got it from doesn’t make them anymore…not sure what happened
The easy with which you just pull panels off 😂😂😂. It would take me 7 hours to do that, I’d be worrying about braking things
Hahaha!…I’ve been told I’m a little crazy for years, but this isn’t bad at all!…looks way worse than it is, thanks for watching!
Why??
Why not??…did this on my 2020 Platinum and it’s one of my most popular videos…shows people how to disassemble if you need to run wiring or what to customize…it’s easy
*want to customize
😮😳😳🤯🤯crazy
Way easier than it looks!
WHAT THE HELL FOR??????
Hahaha...for the channel, and cause I honestly love doing this stuff...I did this same thing on my 2020 Platinum and couldn't tell ya how many people found it helpful...it's one of my most popular videos...if someone wanted to customize panels, run wiring, or any other type of install where they would have to remove panels, they found it extremely helpful...thanks for watching!
Great video thanks for taking the time to make this! I haven't see anyone talk about adding the SR5 storage box over the passenger side glove box to the TRD Pro or other trims that do not offer it. Looks like a great place to store things for a passenger.. From this parts image it would be 55041B (and a few other parts) images.simplepart.com/images/parts/toyotaOEM/fullsize/a1_555165C.jpg. Any reason this wouldn't fit on a non SR5?
Thanks Joe!…it’s funny you mention that, I’m considering swapping that piece out myself…I can’t confirm for 100% certainty that it fits, but I can’t imagine why it wouldn’t….the way all these pieces snap in, I would think they’re completely interchangeable…I’ll keep the channel posted if I swap out any of those pieces, I’m thinking about either adding that little “tray” area, or swapping my dash out to the red pieces…I’m not a fan of red seats which is why I went with the black interior, but I do like the red dash accents!