Connect to your OMPHobby M1/M2 Heli using a Multi-protocol module and the OMP protocol!
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- A huge thank you to www.scotiarc.co.uk/ for helping with this series. Check them out for OMPHobby helicopters, VTOLS and lots of other cool stuff!
Link to the entire series/playlist: • Beginners Guide to Mod...
How to update the MPM module: • Flashing/Upgrade your ...
Link to the download page for the latest MPM FW: downloads.multi-module.org/
See how to setup EdgeTX/OpenTX and use an SBUS receiver with your M2: • Setup EdgeTX/OpenTX fo...
Timecodes:
0:00 Intro and limitations:
3:32 Updating the MPM module/radio to get the OMP protocol
6:20 Setting up the radio model
11:46 Binding to the inbuilt OMPHobby Flybarless unit
12:37 Summary
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingiverse.com/painless360
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#helicopter #multiprotocol #binding
![[MIRRORED] LISA - ROCKSTAR 🎸 MV version #LISA #BLACKPINK #ROCKSTAR](http://i.ytimg.com/vi/-U58DuCCtZk/mqdefault.jpg)
Just bought the OMP M2 Evo and I dont have a spare reciever yet, Painless 360 to the rescue again in helping setup just using OMP protocol, not explained by anyone else. Thanks again
Thanks man! I received my M2 yesterday and struggled with configuring it with my TX16s until I found your video. You are the only person who addressed how to configure the M2 with the built in OMP receiver. Excellent information!
I want to thank you for helping me set up my OMP M2. I spent a half a day trying to set it up. Because of your awesome set up tutorial I'm up and flying. Please keep the coming 😊
Pretty interesting indeed, Lee! Thanks! 😃
The 4 in 1 modules are amazing. It's becoming the standard!
Stay safe there with your family! 🖖😊
As usual, a clear explanation of how to use the OMP Protocol. I initially set up my OMP2 Explorer using the native protocol with my Horus X12S. I didn't find the set up process intuitive. I subsequently changed to SFHSS because I'm more familiar with the tuning possibilities using that protocol in OpenTX.
Hi Lee Great video and review of the OMPHeli M2, this is the heli I have been wanting for the last two years. I have been told that it's one of the best Helis to date. Thanks again for the video and information
I just have the M1 Evo for starting my hobby. I am consider whether it is suitable to buy M2 EVO for my learning path.
Excellent video Lee, just done mine (was on crossfire/sbus) but no wanting to try the parameters in the M2 controller, THANK YOU
Thanks Lee, nice and clear. Only recently set mine up the only difference being I did the throttle cut as an override special function but as always with EdgeTX there's usually more than one way to do these things. Also I noticed you had throttle cut at low stick, is that something you added? I did the same but had to use a logical switch.
I have mine set so that the throttle is live only when the throttle switch is in the middle position. Makes it easy to kill it if things go wrong... Happy flying
Hi Lee, hope you are well.
Great video, this appears much simpler than the downloaded file from OMP that has logical switches coming out of its ears, and for the life of me I cannot decifer it.
This looks much easier with no curves. I have an M1 Evo, will these settings work with that.
Thanks in advance.
Paul 👻
Hi, thank you for getting back to me so quickly, I have followed your advise and watched the video, confused as there is more information than I could follow as the new Edge TX comes with an OMP widget already installed, am I supposed to copy and create this model, I think as I said a lot of the help out there is related to previous versions of edge TX
Setting up a heli is not a 'newbie' process. I'd follow step by step and watch some of the beginner videos to learn the basics. Best of luck
Awesome Video! Curious what theme do you use on your radio?
I edited the default one... happy flying!
Hi Lee,
Thanks for the great content. Dumb question incoming - On the Radiomaster TX16S, did you have to buy an external module for the multi protocol? Or does it just come with it?
I'm using the original Taranis X9D plus, with the latest update. But I'm being told I'll have to buy an external module, in order to use the multi protocol. I opted to use a receiver instead of just binding to M2's flight controller. Thanks again
The 4in1 multiprotocol module is all fitted inside the radio so you can add extra things like ExpressLRS or Crossfire into the JR bay at the rear. See my videos on it.. best of luck
Hi, love your vids, I just picked up an M2 and a TX16s, I've swapped it to mode 1, what settings do you think I need to look out for when setting it up? As Mode one is it still ok as AETR when its kind of ATER I appreciate your help
Cheers Simon New Zealand
The mode on the radio doesn't change the channel order on the outputs. Check it, but it should be fine. Best of luck
Thank you for your guidance, Thanks to you its all working, your a Champion. Cheers
Question: is not longer the case that if you bind using OMP's protocol that you cannot apply your own curves (meaning, the FBL unit's internal curves and mixes override anything you do)?
Mixing is done inside the flybarless unit. This is so that simple radios can be used. If using an external reciever you can change the curves and mode behaviour. Happy flying!
Hi Lee - thanks for a very informative video! I just got my TX16S 4-1from a local retailer here in Norway and it comes with EU LBT firmware, which seems to limit the number of protocols available in the MPM module. The OMP protocol is not among those few that are listed. Any ideas on how to get access to the OMP protocol on my radio?
What versions of stuff are on the radio? What did the seller say?
@@Painless360 I have a TX16S MKII with EdgeTX 2.9.3 and internal MULTI module 1.3.3.24. Radiomaster's web site states that the 4in1 LBT Version (Europe) is limited to LBT compliant protocols FrSKY X/X2 LBT, HoTT LBT and DSMX. Any advice on how to enable the OMP protocol is much appreciated!
@@Painless360 I seemed to have figured it out. I simply downloaded and flashed the latest MPM firmware and all the protocols showed up in the menu 👍
@@larspettereliassen8410 and @Painless360 I did do the same, all the protocols showed up in the menue, but only a littel number of protocols is usable. When switching off the radio and switching it on again, I get only a reduced list of protocols including: BayanRX, DSM, DSM_RX, FS2A_RX, FrSkyRX, FrSky X, DrSkyX2, HoTT. I cannot use the OMP Procotol. I use MPM firmware 1.3.4.0. Any ideas how I can get hans on the OMP Protocol while in LBT? Did it really work for you, larspettereliassen8410? I use the TX16 S firmware 2.8.4.
If still apply the pitch curve into the setting, what is the result ? And, is the OMP protocol suitable for beginners to practice hovering and further their 3D learning?
Not sure I understand the questions. th-cam.com/video/-SSMPYR0mO0/w-d-xo.html covers what a throttle and pitch curve does. The OMPHobby protocol on the MPM doesn't affect how easy (or hard) a model is to fly, it is simply how the radio communicates with the model.. I hope that helps.
Hi, do you know if it is possible to use a micro elrs receiver on the omphobby m2? There is a DSM plug
I'm not aware that ExpressLRS supports DSM...
If it was SBUS it would be really easy. But DSM? I don't know any solution. 😕
You said to turn off trim in input. Im using edgetx and dont see that option. Fairly new to the radio
th-cam.com/video/ZIj2l1s9e2M/w-d-xo.html :D
Hello thanks for your videos I have learned a lot from watching them I have a question I have bought an omhobby m2 evo rtf with a radio master zorro and now I have bought an omhobby m2 evo bnf so my question is how do I set it up and tie the one with Muli protocol for my radio master so I have two profiles on it thanks in advance
I am not sure that I understand the question. Can you explain a little more?
@@Painless360 one helicopter is satup on my radiomaster zorro so I can fly with it, but I have bought a bnf omphobby m2 evo which I would also like to have on my radiomaster zorro
I see. I'd copy the model and setup the copy with the new receiver. Otherwise you'll end up trying to keep track of the setups for the Rx's in the model settings.
@@Painless360 ok so I copy the model and bound it with the new receiver and it should work
I will try that, thank you very much for your help
Hello, will this method work for the new M2 EVO?
Yep
hello, short question could you bind all of the omphobby heli to the omphobby t6 transmitter?
Not sure. Maybe... best of luck
@@Painless360 thanks.
Yes, I have 3 Omps (M1, M2, M3) all bound to the same t6. Once they are bound, you just connect them like normal without having to do any model switching.
Help please! I got a new MK2 tx16s running edgetx and omp protocol not showing frequency fine tune.before that I was using opentx and a reg xt16s.and had frequency fine tune
Fine tune is not available on all of the protocols and depends on which chip is being used to generate the protocol you are using. I wouldn't worry if it isn't there. If it was, then I'd use it. Best of luck
@@Painless360 ok thank you.
Hi, I have been watching your channel for a while now, very intersting, is it possible for you to do a video with the new Radiomaster TX16s Mk2 using the latest EdgeTX and the OMP Hobby M1\2 using the OMP system, I have just received both, I have setup other helicopters using Spektrums, but never used edgeTX, all of the TH-cam seems old and use open TX, again, never used these systems, any help please?
This video shows all the steps with EdgeTX... Happy flying
Did you have to fine tune the receiver for the heli?
Same was as any other protocol. Only those where there is an option for it on the radio, need it though.. Happy flying!
can you show setup of 2/3 pos switch? I only see one line
I don't understand the question. Can you elaborate?
@@Painless360 Sorry new to this, when I use a 3 position switch let say for Ch6, I will have 3 lines either on input channel or Mixer. for example first line will be -100% max SE (up) and next line 0% SE (mid) etc,
you only have one line for CH6 but show at bottom of screen the -100,0 100 as you toggle,
I am using 2.8 flying dutchman,
spent all weekend trying to set up the M1 on OMP, thanks to your vidoe I have it working somewhat, but rudder is all anti clockwise and nothing clockwise, about to send back and get FSHSS type
Please check out my Opentx mix school series. What you want is basic radio programming and covered in that series.. Best of luck