This channel is the definition of clean and crisp DIY. Which is how DIY Projects should be. Great video and great skills. Awaiting more content from you.
That looks as if you bought it as an arc lighter. I would have crossed the arcs, but wow, brilliant lighter that you can enjoy for life. Great, beautiful work.
Great build, I love the way you take each component down to the necessary minimum, I'm pretty sure that the electrodes will burn out pretty quickly, I think if I were to make one I would design a replaceable electrode assembly, I think if you use platinum wire then that should work better, it's not cheap but I'm sure it's used on some catalyst lighters but maybe it's too thin?
A special DIY project Great creativity in making the required parts along with very high precision in their arrangement. I want to thank you for sharing these videos.
you make this look so easy, and well mm gl to anyone copying this lol. Congrats on being so smart, I wish I knew more about this stuff, no clue really. thanks for vid.
Восхищаюсь автором! Перевести плату заряда на навесной монтаж?! Как же он все умело вмещает в корпус! И пусть, самоделка достаточно простая, такая ювелирная работа заслуживает уважения!
Согласен, но не со всем. Микросхема с платы зарядки является линейным стабилизатором тока и сильно греется в процессе работы. Под ней на плате имеется даже специальный полигон для отведения тепла. Сама плата выступает радиатором для микросхемы. Убрав полностью плату и не обеспечив теплоотвод для микросхемы автор сильно ухудшил ее характеристики. Теперь из-за перегрева микросхема будет снижать ток заряда, что приведет к большому увеличению времени на зарядку аккумуляторов. Мощность самой зажигалки, кстати, вышла не очень - низковата частота генератора.
Представляю отечественных умельцев где то в оСколково, после ящика водки и просмотра этого канала они решают сделать то же самое и у них получается!криворуко но зато прогрессивно!И п ТВ потом их покажут как изобретателей новейшей зажигалки, и вручат ордена за криворукую подделку🤣🤣🤣🤣а автор канал молодец🤗всё гениальное просто🙂
Impressive. Your skillset is well above the average to say the least and your work is exemplary. For a DIY project this is not very useful for the average person however. The average person wouldn’t know the components you used or where to find them. You had notes on screen but not vey detailed. You should add some voice to help people to better understand. Please don’t take that as criticism, that is not my intent. Back to the project, awesome build! Nice and clean. The finished product looks professionally done. You do great work my friend. Your level of patience and attention to detail are evident. Great work.
یه کار فوقالعاده و بی نقص واقعا دمت کرم داداش.فقط هر کسی نمیتونه اینو بسازه مثلا خود من برای تهیه اسکلت کار میمونم چون تو ایران پیدا نمیشه اگر هم بشه انقد گرونه که ارزش اینکه خراب بشه نداره
Two transformers were needed to produce the x-shaped plasma arc. Due to the size of the transformer used in this project, it was not possible to use two.
Wow quedó espectacular este proyecto y como siempre sobresale la calidad de los trabajos que realizas, aprendo demasiado viendo tus videos, este es el mejor canal de TH-cam para aprender a hacer este tipo de cosas. Saludos !
Thanks for watching 😉😉😉
Subscribe to my channel if you like❤️
Hello Penguin DIY where can I get the ferrite core? Greetings
Mind Blowing man
Hello, if you can, visit my channel. If you like my post, be sure to subscribe to see my next posts. Thank you.💛❤
very interesting! Thnks 4 u work!)
I want to buy this, is it OK?
Thank you for not being clickbaity. You provide exactly what the video title and thumbnail shows. Excellent work!
thanks
This channel is the definition of clean and crisp DIY. Which is how DIY Projects should be. Great video and great skills. Awaiting more content from you.
Yes, let's try to see how "project" will kill "developer" in case of extra humidity :)
You are legend ,The most compact wiring you made without PCB. Love you bro.
thanks
The sheer amount of satisfaction one gets while watching ALL videos on this channel is pretty awesome.
Офигенная зажигалка !автор руки золотые да и мозги на месте!
man this is so amazing that you don't even need that background music. amazing job!
That looks as if you bought it as an arc lighter. I would have crossed the arcs, but wow, brilliant lighter that you can enjoy for life. Great, beautiful work.
WHAT A UNIQUE BRAIN YOU HAVE!!! AMAZING HAHAHA DANG! 😭 Can make money out of it seriously.. Its amazing how you got all those mats really..
Great build, I love the way you take each component down to the necessary minimum,
I'm pretty sure that the electrodes will burn out pretty quickly, I think if I were to make one I would design a replaceable electrode assembly,
I think if you use platinum wire then that should work better, it's not cheap but I'm sure it's used on some catalyst lighters but maybe it's too thin?
Use old spark plug electrodes, iridiums would be mad! :)
i think the electrodes are replaceable as they are secured with a screw only
woww.. .amazing ,,your hands more stabil than my life 😁
Небыло зажигалки под рукой, пришлось на скорую руку делать самому. Повторил всё точно как на видео. Спасибо большое автору!
благодарен
Very good great workmanship 👍
Your soldering skillls are at another level
A special DIY project
Great creativity in making the required parts along with very high precision in their arrangement.
I want to thank you for sharing these videos.
Ммм, прямые руки, круто, тонкая работа ☺️👌
Awasome video qiulty and excellent idea 💡
you make this look so easy, and well mm gl to anyone copying this lol. Congrats on being so smart, I wish I knew more about this stuff, no clue really. thanks for vid.
❤❤❤❤❤❤
Восхищаюсь автором! Перевести плату заряда на навесной монтаж?! Как же он все умело вмещает в корпус! И пусть, самоделка достаточно простая, такая ювелирная работа заслуживает уважения!
Согласен, но не со всем. Микросхема с платы зарядки является линейным стабилизатором тока и сильно греется в процессе работы. Под ней на плате имеется даже специальный полигон для отведения тепла. Сама плата выступает радиатором для микросхемы. Убрав полностью плату и не обеспечив теплоотвод для микросхемы автор сильно ухудшил ее характеристики. Теперь из-за перегрева микросхема будет снижать ток заряда, что приведет к большому увеличению времени на зарядку аккумуляторов. Мощность самой зажигалки, кстати, вышла не очень - низковата частота генератора.
Представляю отечественных умельцев где то в оСколково, после ящика водки и просмотра этого канала они решают сделать то же самое и у них получается!криворуко но зато прогрессивно!И п ТВ потом их покажут как изобретателей новейшей зажигалки, и вручат ордена за криворукую подделку🤣🤣🤣🤣а автор канал молодец🤗всё гениальное просто🙂
@@AleksServisMan в таком случае кусок медной шины на живот + желательно уменьшить ток заряда заменой резистора 1к2 .
Wow this is the best DYI I have ever seen
Bravo 👏
This is what I picture McGyver in real life. Clean and absolute hacks , props! Awesome video to watch, very intriguing!
I live in Japan and enjoy various DIY projects, but your idea is wonderful. I'd love to learn.
Your knowledge is awesome dude
دمت گرم بابا خیلی تمیز انجام دادی🔥🔥🔥
ممنون
Godspeed man. That's some steady hand u got there....
''''’''’'''''''Bro you deserve more than 10M subscribers 👏'''''''''''''
Oh, he will get there.😀
wow!! your work always amazed me 😮❤️
Me too
Hello, if you can, visit my channel. If you like my post, be sure to subscribe to see my next posts. Thank you.💛❤
عالی بود دوست عزیز، عجب ویدئوی با کیفیتی، بهت افتخار میکنم
ممنونم داش حامد
عالی بود پسر ، آرزوی موفقیت روزافزون برایت دارم داداشمی
ممنون داداش
i love your work, you create incredible things and you always impress me, I always look forward to your future projects
Bro you are a professional 🤠
You definitely know your stuff. I have no clue what any of this was, but you nailed it lol. Very fun to watch tho
لحیم کاری قطعات اس ام دی ... اونم تو این مقیاس ... ساختن ترانت .... ساختن دستگاهی ظریف و میناتوری .... واقعا دمتون گرم
مرسی
ماشااللہ آپ کا چینل جلدی کامیاب ہوا
شکر گزار
Remarkabke craftsmanship!
electronic master!!
amazing hand stability
Nice work, well done👍🤝🤝🤝
Want to see your channel in million subscribers
درود رفیق ،، نمیدونی از اینکه نوشته ی روی چسب رو خوند م و به ایرانی بودنت پی بردم ، چقدر خوشحال شدم و کلی به داشتن آت افتخار کردم
زنده باشید
مرسی افشین جان
Great project... I love it....😍😍😍
❤️❤️❤️❤️❤️
Carry on bro..
Take love from India.... ❤️❤️❤️❤️❤️
thanks
Amazing idea NO more words 👏👏
Nice man! good to see you are using Type-C
This work is the best of all your crafts. Very cool result.
absolutely insane build!! So awesome. you should get a 3D printer, i would love to see what you could make with one of those at your disposal
基板をバラしてICに表面実装パーツを直付けする部分、毎度ながら細かすぎてすごいです・・！
Impressive. Your skillset is well above the average to say the least and your work is exemplary. For a DIY project this is not very useful for the average person however. The average person wouldn’t know the components you used or where to find them. You had notes on screen but not vey detailed. You should add some voice to help people to better understand. Please don’t take that as criticism, that is not my intent. Back to the project, awesome build! Nice and clean. The finished product looks professionally done. You do great work my friend. Your level of patience and attention to detail are evident. Great work.
Искренне желаю дальнейших успехов вам. Это DIY каким он должен быть.
Very Hard work and Nice Quality
BRO YOUR A GOD IN THESE THING RESPECT FOR YOU👍👍👍👍👍👍👍👍😁😁😁😁
Outstanding Dude 👌👌🤌
Cutting edge level of precision 👏
Your videos are always entertaining.
I'm glad you like the videos.
Ohh man... you are the best👌😊👍
thanks
Wow. Super Master!!!
یه کار فوقالعاده و بی نقص واقعا دمت کرم داداش.فقط هر کسی نمیتونه اینو بسازه مثلا خود من برای تهیه اسکلت کار میمونم چون تو ایران پیدا نمیشه اگر هم بشه انقد گرونه که ارزش اینکه خراب بشه نداره
Шедеврвльная работа. Незнаю кто ты атор но руки у тебя золотые. Успехов и всех благ продолжай в том же духе
Спасибо
Fanstastic work 👏👌 thanks my friend👍👍👍
You are very creative ❤❤❤❤
اینو میگن کار تمیز و با دقت مرسی💘❤🌹
**Очень интересное изобретение! Успехов вам! :)** 😋
Wow ! Beautiful and delicate !
As a channel that produces such original projects, I find your work very good.
I also wonder what it would be like if the arc formed was diagonal(X).😊
Hello, if you can, visit my channel. If you like my post, be sure to subscribe to see my next posts. Thank you.💛❤
Two transformers were needed to produce the x-shaped plasma arc.
Due to the size of the transformer used in this project, it was not possible to use two.
Не могу с тобой не согласится!😄
Lighter & self defense weapon! I like.
خداوکیلی دمت گرم زندە باشی باعث افتخاری . کارهات یکی از یکی محشرترن، بی نظیری
ممنون داداش
دست خوش مهندس بسیار عالی بود
ممنون
Xịn sò quá
Your work is so neat as usual 😉
Hello, if you can, visit my channel. If you like my post, be sure to subscribe to see my next posts. Thank you.💛❤
finally an update too, by the way, very creative, cool👍👍👍
مثل همیشه عالی و بینظیر لذت بزدم ، از اینکه کانکتور تایپ سی استفاده کردی مچکرم 😉
ممنون
دیگه انقدر گفتین تایپ سی بزار منم مجبور به این کار شدم😄
Is very ingenious. You and your staff. 👏
I will not blow up the planet.😄
Thanks 🌹man
Make more on led lights
Awsome work, I'm satisfied
Spectacular work as always !
Next episode: diy lightsaber from a toothpick, a 9v battery and a light bulb
Very impressive work!!!
Amazing work as always, I love this channel!
بازم مثل همیشه عالی
Fuel lighter convert in to plasma lighter with so clearly and satisfine Work.
Wow quedó espectacular este proyecto y como siempre sobresale la calidad de los trabajos que realizas, aprendo demasiado viendo tus videos, este es el mejor canal de TH-cam para aprender a hacer este tipo de cosas. Saludos !
کارت درسته ایول👍👍
That noise would drive me nuts!
Amazing miniature projects.
Keep it up
Perfect bro👏🏼👏🏼👏🏼
It workes and it's impressive (I gave it a like), even though it's too loud in my taste tbh.
دمت گرم داداش برات آرزوی موفقیت میکنم❤
ممنون پوریا جان
Beau travail, magnifique réalisation, bravo.. 💡👍👍👍🛠️👌👌👌... 👏👏👏🙏🙏..
Ювелирная работа 👍
Great job, it made me want one 😍
Very nice project bro ;)
Masterpiece !
a damn soldering pro. That would be my weakness is that part.
Руки точно из плеч и голова на месте! 👌👍
پسر خیلی کارت درسته👍👍👍👍👏👏👏👏👏
ممنون
خدایی خیلی قشنگ کار میکنی❤
Just found your channel, absolutely cool, I love this kind of tinkering. Not that I`m able to make stuff like you :) Keep it up.
You are So good 👍👍 ❤🎉
Very good soldering skill to solder resistors that tiny
Perfectly! 👏👏👏
عااااالی ماشالله تمیز و شسته رفته