Worked for me i only disconnected the Blu-ray drive from the board and removed the HDD then long pressed the eject and power button and voala!!! MANY THANKS!!!
Double check wiring. Make it neat, use short wires. I used 30AWG wire for all the alternative points and 0.1mm wire for pin 15 directly. Have you lifted pin 15? Do you have the RL78 syscon which is exploitable? Check all the info in modded warfares guide for revert. How far are you getting with the tool?
@KyleGP i managed to find what i was doing wrong. I successfully dumped Nor and syscon. I then erased Nor and wrote on it. But when i wanted to write on Syscon the PS4 Syscon tool kept freezing. I thought if i removed the wire on pin 15 it would connect because debug mode is enabled so problem was solved after i restored the wire to pin 15. Either way, thanks for replying and offering to help.
Worked for me i only disconnected the Blu-ray drive from the board and removed the HDD then long pressed the eject and power button and voala!!! MANY THANKS!!!
I'll try it and thanks I've been stuck on that step
Ts seems my syscon is dead 😢
please the soldering points of the teensy to the diagram sir
@@kabs5416 It's available online
well that didn't help :/ any other suggestions?
Double check wiring. Make it neat, use short wires. I used 30AWG wire for all the alternative points and 0.1mm wire for pin 15 directly. Have you lifted pin 15? Do you have the RL78 syscon which is exploitable? Check all the info in modded warfares guide for revert. How far are you getting with the tool?
@KyleGP i managed to find what i was doing wrong. I successfully dumped Nor and syscon. I then erased Nor and wrote on it. But when i wanted to write on Syscon the PS4 Syscon tool kept freezing. I thought if i removed the wire on pin 15 it would connect because debug mode is enabled so problem was solved after i restored the wire to pin 15. Either way, thanks for replying and offering to help.