2023 AGT Chinese mini excavator mods and thoughts
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- HENGWANG Wide Backhoe Bucket, Mini Excavator Bucket, Hydraulic Tilt Backhoe & Excavator Attachment, Span: 90MM/3.54in, Hole Diameter: 25MM/0.98in, Center Wheelbase: 90MM/3.54in (7.87in) a.co/d/hj76z1q
- แนวปฏิบัติและการใช้ชีวิต
![[TH] 2024 PMWC x EWC Main Tournament Day 1 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/f5Coja1zCzo/mqdefault.jpg)
Pretty cool and good price, really looks brand new, just want to advise to put a ip66 or ip67 toggle switch there because the rain, also install and in-line fuse or a relay to prevent any electrical problems,
I bought a heavy rubber mat and used the original mat as a pattern to cut out a new mat. My L12 had 145 hours on it even though it was unused also.
I like the needle type zerks, they're pretty low profile. The only regular zerks on mine are for the rotational gears. I got a chery kv12. More or less the same as that, few differences. Mine came with a grading bucket, tooth bucket, grabber, and a quick connect
Hey man! This is a great review and you have helped me make up mind! I’m picking one of these up this weekend up here in CT!
Glad I could help!
Where in CT did you get it??
I actually found mine on Facebook marketplace….i picked it up from an individual in north haven who bought it new from Chicago
Oh ok cool, I’m not far from there. I wonder if they have any more, how do you like it?
AGT is a real company. You can buy that loader at auction for $2500 - 2900.
Well it been a couple months. Do you regret changing those grease zerks yet? If not, you will. They put the needle style in so you don't break them off while digging.
The battery cut off makes the perfect spot to switch the fans, that way you wont forget to turn off the switch because the fans will audibly remind you.
No, I do not… changing out the timer to digital, helped with the ignition problem that keeps running the timer without the engine running. My fan switch works perfectly 👍
Man that's cool. That ought to work good for an occasional trench.
My thoughts exactly
Nice😊
Thanks 😊
Go into detail on fans. That's a really great idea. Where did you get them,how did you install them. Thanks
Order off amazon. These are 8 inch fans
I just bought a QH12 as well! Thanks for making this video. What oils do you recommend for engine and hydraulics?
I use 5w30 for the engine
I used the 5w30 as well. Change it out after a few hours
Thanks ! How much does it weigh ?
Liked/Subscribed
1800 lbs.
Roughly….
Cool. Could you post a link to the 10" bucket?
Check the post now
this is great machine,did you order from China?we are factory if the mini excavators,check ut
I bought it from a used car dealer in my town. They just happened to run across them at auction. Wasn’t something they sold all the time.
Hi do you think this could assist towing my boat into its storage area? Looking for something multi purpose
I don’t have an answer for that sir. Sorry
U think I could do grading with it for large 12x24 sheds?
The tracks don’t really have much give in them. You’d really have to work the push blade up and down quite often. It will only push so much material, before it will start coming over the top. The push blade is really for short distance grading.
Vertical Portrait Mode videos suck on a 24" 4K computer monitor. HORIZONTAL Landscape Mode! RTFM for your phone.
Is there an oil filter on these machines? What grade oil to use and how much is needed?
No filter.
One court 10 W 30
$6,800? I thought these were like 5,500 brand new?
Depending on where you shop…
There is a grease fitting in the engine compartment that needs to be changed out and greased. Just an FYI.
Where’s that at?
Got to take off the right hand cover by the foot area and it should be visible once that cover is off. Should be facing the engine.
Sneaky taking the Q off of it lol
Didn’t want the same as someone else
Oh okay. Most people have the H12 but they are always yellow :-) @@brandoncalk1928
Can you show how you installed the fans
I just zip tied them to the side grills. There is power there for you to use. I’ll get a how to video up soon for ya.
Did you add the hydraulic filter?
No. It comes with one
@@brandoncalk1928 trying to figure these things out. Some don't have the filter. Yours is a qh12?
Yes sir it is. Sorry about the late response
They usually come with either a filter or a cooler, but not both.@@ericjohnson9080
Any links on the two 12v fans?
You can search amazon for 12 volt fans. Mine are 7inch
How do you drain and change the hydraulic fluid
I will be putting more videos up on all the questions that was asked. It’s still new to me. I will post things as they happen. It’s not something I’m going to use daily.
We’re dis you find the smaller bucket
I have it up on the post now
I am looking for a auger attachment for mine
Amazon has em
How big a trailer you need to haul it
I have a 1 ton trailer
The bucket teeth are on upside down like most of them
Do you mean they just get flipped over or do they go on top of the bucket verse underneath, ihave one of these units and wanting to correct the teeth.thanks
Actually there not….
Can you buy these closer to Virginia
You can buy all over US of A…🫡
yes,sir,my machines are sold every states
$6800! You over paid for a used mini ex. You can get brand new $5000-$7000
It is brand new, what makes you think it’s not? Because I bought from a used lot? I’m good thunderf4!
@@brandoncalk1928 all I was sayin, you over paid. I can get a brand new one with the hydraulic thumb claw for $5500. It’s all good, some people just like to buy the first thing they see without showing around first.
Where are they
@@Dirt.road.trucker look online, over all the place. Nothing wrong that someone paid $6800, just stating it was over priced. Calm down high speed.
@@thunderf4 perfectly calm, dude
Overpaid, ouch