How Expert Mechanic Fixed a Broken Truck's Muscular Flywheel
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2024
- How Expert Mechanic Fixed a Broken Truck's Muscular Flywheel #mechanic #truckmechanic
#restoration #mechanicalengineering #repairing #metalworking #vehiclerestoration #autoparts #lathemachine #manufacturing - แนวปฏิบัติและการใช้ชีวิต
The stress cracks tell me its time for a new one
Im sure its not an option, otherwise why go through all this trouble.
@romanflores5505 yea but this will likely blow up at some point. This is like going to war with an ak that has blown up before and you switched the mag 😂
@@dahabsemitdiemutterfutter2735yeah, driving with this installed is a good way to lose your legs.
I'm hoping that this was just a guy using scrap parts to learn how to do it.
I'm surprised they didn't weld the cracks. Probably did off camera.
You are so right about the stress cracks but in his part of the world it has to be patched up, and in all fairness he did a pretty good job 👍
All that work to repair the center of a flywheel that's got more cracks in it's friction surface than the San Andreas Fault!!!
😂😂
That's not a problem, it can be resurfaced.
You do what you gotta do
@@awesomeness7117 Yeah when all you got is hammers, everything looks like a nail.
Got that right! Ever see a flywheel explode?!
Presumably that is a steel boss inserted in a cast iron flywheel, should be pinned or keyed to stop it rotating though.
I think it should be completely welded and then they can machine it again since they like machining so much.
@@rileymatthews7167 Exactly, And, because it is Not welded, it will Not hold the engine's Torque, so therefore it will dissassemble, and fall apart Again, Plus causing more damage 2 the engine, and transmission case , or even 2 the driver.
Seems like they absolutely had to do something like pinning or welding. Otherwise, it's gonna unscrew. He just used an adjustable wrench to screw it in.
@@TheZaxx good luck to them if they attempted to weld a cast iron flywheel to a steel boss.
This is where wise guys reply to this video, just needed to leave my stamp
"Okay Joe, see you next Monday, we'll do it again."
🤣🤣🤣
😂😂😂😂😂
love how he finishes it then bonks the teeth against the cement
Good old throw it on the ground for quality check! Wait... What? They have cement on the ground?🤯
That's the problem you noticed, not the cracks in the flywheel? Those teeth only engage the starter, you can file and damage them, won't change anything so long as they're there.
@@em4703he turned it down. Look at the face when he puts it down. He did did the whole job.
@@markstover7701there’s still fucking cracks in the friction surface man, what are you talking about.
@@KimballPrecisionRifles yeah I did see that. It looked like he did cut it. I know they still use them on trucks with minor cracks. Do you sell Rifles or customize them?
Пока есть спрос, будет и работа у этих ребят. В далеком 1995 году была у меня вольво 940. Полетел мотор. Нужны были гильзы, чтоб перегильзовать. Токарь выточил на токарном стонке новые гильзы по образцу, загильзовали, собрали мотор и я проехал на нем больше 200 тыс.км и продал машину. А когда точил токарь, многие прикалывались типа не будет работать. Так что все что делается от души, все работает. Диванным экспертам это не понять. Для них это как Очевидно Невероятно
Но не в этом случае! И советских токарей сравнивать с этими уже неправильно 😂
@@user-cw7op2uk4z
не надо ля ля, специалисты и раньше были, и теперь они ни куда не делись. Но стало в разы больше дилетантов.
Parabéns a esses trabalhadores, são uns artistas.
Про умение токаря никто ничего не говорит. Спец хороший и голова работает. Как эксперимент вполне себе решение. Только и шайбу эту приварить нужно, поскольку на маховик нагрузка в обе стороны вращения прилагается. А маховик нужно в металлолом выкинуть.
А в целом, всё это от нищеты.
Тут вопрс в том как в 95ом году на новом вольво 940 мотор положили ,у меня на вольво 940 500т+ пробег и мотор не трогали ,хотя может это та вольво с гильзовкой от вас 😊
A lot of work to save a broken flywheel! The heat cracks make it susceptible to exploding should be replaced. Probably a discontinued part but credit to machinist doing the repair!
Yeah, when nobody makes that part, you've got to either rehab an old one, or make a New one from Scratch! A lot of work!
This should be called "DESIGNED TO FAIL" 😂
Or Guaranteed to come back for another “Repair” …..
@@richardcornelius1050it's probably going to take out the whole truck and maybe a small village when she come loose 😂
There is load on a flywheel in both directions, that things going to unscrew itself and be 60lbs of hells fury cutting up everything within 100ft
That's what I was thinking... what's stopping that from unscrewing??
Nah!
@@caseybanter5751No it only one directional spinning clockwise or anticlockwise, so if it is clockwise they want only make it anticlockwise.
They didn't show him putting a drop of red Threadlok on there... ;)
Same question I had in my mind. Why did they not weld the new inlet with the old flexplate?
А где сварка кривым электродом???
Они накернят вставку по примыканию перед установкой. И может ещё краской мазнут для уверенности
😂😂😂😂😂❤
Ага, и эпоксидка!
Я тоже ждал
Или пучком остатков электродов))))
These guys walk the hard line. The ingenuity constantly impresses
Когда вас со всех сторон обложат санкциями и со временем вы свои детали тоже переваривать будете,не то,что бы маховики и прочее.А эти народы не сдаются и не жалуются,а находят выход из ситуации вместо лежки на диване и комментирования подобных роликов.
Крайне рекомендую тебе ездить на отбеленном от перегрева чугунном маховике, на инжекторный двигатель ставить карбюратор, дрочить цилиндры наждачкой под ремонт и слезы счастья вытирать от надёжности узлов, комфорта эксплуатации, удобства ремонта такими методами, трудозатрат и потери времени)
Они не пытаются, они просто снимают видео, тут и ежу понятно, что это дерьмо там выживет до включения 1й передачи.
На всё есть свои технологии, никто с дивана просто так говном не обливал эти методы, если бы это работало и было правильно)
Санкции и так задрали, но, тем не менее, достать детали можно.
Если ремонт техники слишком дорогой или невозможный, то такая техника людям не нужна обычно, и уж темболее никто не будет ремонтировать это говно каждую неделю, чтоб хоть как-нибудь было. Есть масса более ремонтопригодных аналогов)
В данном конкретном случае люди не смогли купить новый маховик, который можно купить и который не стоит космических денег, скорее всего просто для видео. Если такую деталь невозможно было бы достать новую, а единица техники уникальна, то целесообразно изготовить новую деталь на производстве, что будет точно, надёжно, окупится и в итоге выйдет дешевле, чем такого формата кустарный ремонт
@@user-tb9tm4xt1b свой совет себе посоветуй!!Я знаю,как у вас делают,тем более после санкций.Так,что жужню не разводи!!ыксперт
@@user-tb9tm4xt1bыксперт,ты так ничего и не понял!!))
No way. Imagine going down a hill and you let up on the gas and this thing unscrews itself.
....or comes COMPLETELY unwound, unscrews the bell housing, firewall, and you legs
When that happens, the driver is screwed
With those right-hand threads, it will unscrew when under power if the engine rotates clockwise as viewed from the front. This will cause the flywheel to crash into the back of the engine.
Red locktite and it’ll be just fine
They made it for museum and you all taking it seriously 😂😂
It's show piece only
Следующей этап , я так понимаю, будет проварить все трещены на маховике и проточить его. Красавчики,что тут скажешь.
Следующий этап - сдать в чермет! 😂
@@user-xo9hd8lo2x Эээ, нет. Этот маховик ещё долго будет радовать пакистанских пацанов. Они не одну коробку на нём ещё порвут.
@@user-xo9hd8lo2x В чермет они сдали кусок станины токарного станка, а этот блин ещё походит...
Воскресение мертвеца только Ильдар делает. А этого маховика - мертвый побольше из значения слово мертвый
У тебя голова в трещинах и это заметно, а маховику пох на них.
Always the easiest with the right tool for the job 😊
Who needs a new flywheel when your backyard machinist can fix ya up in a jiffy
Just never mind all the stress cracks in the face of it...
That flywheel was done.
Just never mind that you know nothing about resurfacing of a flywheel. It's the same process as shaving a cylinder head or deck of a block. These people probably still have rotors resurfaced (turned).
*No lubricant* was harmed in this short
на очке😂
Air cooled! ( sarcasm alert)
@@johnnywad7728 😂
They didn’t have a replacement flywheel
Lubricant is probably scarce also
🤷♂️
Maybe nobody sells it, because nobody has ever wanted to spend money on it.
Don't worry about those cracks! You'll be totally safe on the road.
These people are amazing, they think outside of the box.
When the flywheel lookes that bad it's ready for the bin...
Маховик перегрет, сцепление палили нещадно
А что ты хотел? Там грузовики с тройным перегрузом ездят.
В любом маховике есть трещин
Even if the disc itself is shot, the repair work is sweet. It will get you home if there's no other solution.
Don't mind those heat cracks. It'll be all right
Теперь в магазине полюбому надо с ренгеном запчасти покупать,,,, но за труды жму руку ,,,
My god that is horrendous.
Never mind the cracks in the casting.. or that a flywheel coming off will take your legs with it. Wrong at every level.
Tenth time this things been repaired😂
If an emergency repair, to be safer, add stiches to thread seam. Heat the whole thing to welding temps, stress relieve.
@@justinloxley9695😊😊😊😊😊😊😊😊
if its welded together no problem
@@bratwurstmaxxehaxxe5315 welding adds stress and warps the plate, stitch the seam
Einfach nur fantastisch es gibt wenige Menschen die ihr handwerk wirklich verstehen und mit Herz und Seele dabei sind, etwas zu retten statt neu zu kaufen❤😊👍🤗🙏
An amazing job that this mechanic do specially when the owner doesn’t have any money so in essence, they’re saving him money he hasn’t
Ага и маховик весь в трещинах...😂😂😂
Это армирование 😂😂😂
Это называется работа на отьебись 😂😂😂точнее на пару часов как дадут нагрузку в России и маховик акуеет
И что? Он ещё лет 10 проходит
Ему ещё ходить и ходить 🤣
@@ToT_Camblu Воздухом.
I would at least put some dowels and braze them on. The flywheel seems eager to strip the threads off and do what its name says, fly away.
Sometime parts are not readily accessible. Great job on adapting and overcoming a problem!
Most would've scapped it, but most broken things Can Be Fixed, with a little effort!
I saw an elderly relative struggling with a mixer and offered to fix it. H
She said "No, I'll just buy a new one! This one is 25 years old!" But I did fix it in about 15 minutes, saving her $15 or $20.
People USED TO Fix Things! There used to be "Repair Shops" where for a few dollars, someone would fix your broken Vacuum Cleaner or Coffee Maker! But those, are all but gone! "Buy a New One" is the motto for today's consumer! People used to Fix Shoes! But "Shoe Shops" are Few and Far Between today!
для них дорого вот и шаманят, Но ребята при таком объёме работ целиком маховик изготовить можно, а зубчатый венец переставить.
Вот именно.
Переплавить и отлить заново.
Пусть похуже заводского, но в разы надежнее чем так...
Хоть и маховику скоро кранты придет но токарь от БОГА! Золтые руки,молодец!
Ese es buen trabajo esa parte hoy en dis esta csro
@@user-lu9lc9wn5n не просто скоро, а немедленно.
Переплавить, отлить, и выточить новый разумнее всего.
😂😂😂😂😂😂
- Маховик в трещинах!!!
- На следующее ТО приносите, посмотрим....
Это графит а не трещины. Так выглядит чугун.
Can’t believe he didn’t a least weld the center so it doesn’t unscrew
These machinists are miracle workers.
Осталось покрасить и отправить переплавку.
крепление это хорошо, а рабочая поверхность вся в трещинах их не смущает???
These fellas do some really inventive work, the lathes etc look to be in well maintained condition.
He done a fantastic job. Shame the flywheel is surface shattered, now he needs to machine a new flywheel to match his shiny new center boss
При обработке видно было что это чугун а на крутил туда обычную сталь , как она себя поведет я незнаю. Токаря поймут по стружке
Да нормально должно быть...
так чо он вставку резьбовую не приварил штоле? ВСЁ Х*ЙНЯ, давай по новой, всё переделать))
учитывается по ходу движения коленвала будет работать на закручивания
@@avtolubitel0557выдержит ли резьба и буртик нагрузку, особенно при резких стартах?
@@avtolubitel0557главное двигателем не тормозить😢
Justru dengan pengelasan akan menimbulkan zona rapuh yang disebut HAZ
@@romandavidov8137 и с толкача не заводить😂
99% of Americans can't name ONE TOOL that he is using. 😮
Just so everyone knows, the cracks on the fly wheel act as extra cooling while it does a wobble rotation.
Я токарь и слесарь со стажем, это всё на один запуск с толка а стартер будет отварачивать плюс дисбаланс из за неточно разметки и отсутствия балансировки.И вообще это же чугун. Ролик для незнающих, по другому надо было делоть раз на то пошло.
Да клоуны бл
Они правую резьбу нарезали, там не стартёром а двигателем будет фланец откручиваться.
C'est un volant moteur qui a déjà subit une réparation avec un acier non traité C'est pas étonnant qu'il a cassé mais il recommence la même erreur et en plus il est plein de fissure ce volant est bon pour la poubelle mais après faut les comprendre ils font sa par manque de pièces détachées ils ont pas trop le choix
Tout à fait, les fissures sont grosses comme le nez au milieu du visage. Ce métal est très fatigué.
He is not a mechanic. He is a machinist.
This is true environmental protection 👌🏻♻️
Repair and fix until it's beyond repairable instead of buying a new one
oh hell no…you didn’t even fix the cracks in the friction surface?
Трещины для охлаждения!
This is not cracks, this is the tungsten-carbon fiber inclusions. And please don't tell anyone about this.
@@borisbudkin6349 Lol…ok 👌
I figured they would at least throw a weld to that sucker.
It's ok they used some loctite on the threads
@@brettw90фиксатор резьбы разрушается под длительным воздействием температуры
What is trash to the whole world is new to them😂😂😂 let them use the trash👌🏼
Thats some nice work had a v8 powered jeep with home made gears front and rear.. this is what that builder was working with .. skills and a badass lathe
Skilled labor is amazing
Интересно сколько проходит данная деталь
Главное назад резко не сдавать, а то резьба открутится 😂😂😂
Тикток доснять хватит😂
@@prestichмаховик в одном направлении крутится
@@1-_-12-_2 ха, точно.
Бред эксклюзивный, видео для просмотров.
Резьбу нарезал - на станке- одним взглядом- красавчик
Nice job, but what if they start? The truck in reverse, will it back out
Fantastic effort, hope it works well for you…..
А что резьба удержит?
Если не заводить
Не лейте молодое вино в старые бурдюки!!!! Нельзя вдохнуть в умершего жизнь. 😂😂😂
Excellent work of turning and ingenuity!!
You mean, " A master Machinist repairs a garbage flywheel."
Тапочки в восторге!
Надо сразу белые одеть. Прямиком туда в них😂😂😂
Покажите где он разлетелся по швам и размотал все по пути 😂
Sin palabras....son unos maestros!
Never underestimate a Craftsman.
U just wait till the law firm "dewey, sue'em and howe" sees this. Its gonna be yuge!
Better chance of finding a three legged ballerina in Pakistan than a partner with that law firm.
Despues del roscado necesita
Poner tres espigas .. x q ese material queda debilitado y se puede girar ...
Эти пакистанцы не перестают удивлять, дивицыт запчастей ни такому научит🤟
😁 дЕФицИт грамотности у тебя
@@user-tj7we4cc7j да вообще похуй я ни исправляю написал быстренько понятно де че написал
So you hit the gas and the flywheel tightens to the point it hits the back of the motor and locks up and then you engine brake to unscrew it and it backs the whole flywheel and clutch assembly into the bellhousing and smashes the whole transmission loose before dropping out the bottom and turning into a kinetic weapon and cuts through a school bus... genius on every level.
With the cost of labour nowadays, it would make more sense to buy a whole new flywheel and replace than repair that.
Меня одного удивляет КАК можно было срезать маховик? Что надо было делать? Это с грузовика ДЖИМХАНЫ?😂
там не такие кардабалеты пакистанцы выкидывают. мосты на 2ое ушатывают.
А а что загнутым электродом забыл проварить😂😂😂
I think it's a good repair, but I'm really hoping that he actually welds that into place. There's no way that it won't come apart without.
Now the flywheel unthreads itself, every time the engine shuts off😂
Этот маховик будет ходить,старые малооборотные движки так и ремонтировали,все делалось на коленке и раздолбаных токарниках и ходило,мы как то дт75 шатунные шейки притирали вручную,с подгонкой прокладок под вкладыши,работал как миленький,через 2 года я уволился,а он еще работал
У дт 75 допуски +/- трамвайная остановка. При его характеристиках вообще ничего удивительного нет, он и был создан для такого колхозного ремонта кувалдой и электродом.
Просто времени это отнимает массу, никакого смысла нет этим заниматься сейчас, когда на любом производстве за небольшие деньги тебе подгонят, расточат, изготовят то, что попросишь и нарисуешь. Уж молчу о том, что можно коленвал просто купить, а не дрочить его наждачкой 2е суток)
@@user-tb9tm4xt1b это в большом городе все что хочешь,а в глубинке сварка и болгарка,остальное что и было ушлые деятели на металл попилили еще в 90е
@@user-ih7gn4pi9e в глубинке есть почта России? Есть.
Есть интернет? С огромной вероятностью.
Отправить что-то в крупный город/райцентр можно, в интернете найти организации проще простого)
Я не с потолка это всё беру, сам в глуши живу, всё нормально делается)
Скажу честно снимаю шляпу, 👍👍 мастера своего дела
That flywheel has more crack than Harlem
This is true natural selection at its finest right here 😂
Don Garlits wouldn't even use that!
Don Garlits ESPECIALLY wouldn't use that. He learned a hard lesson about exploding clutches once.
If you're gonna fix that part, you should've laid the entire disk instead. You just put a thing in the middle instead. Screw all those cracks down your actual surface that meet up
Give that man a 200 dollar raise 🎉
Главное, что бы вставка не раскрутилась по резьбе 😂
Двигатель не запускать!
I wouldn't run that piece of junk in my truck.
Have seen the trucks they run in India Death traps
U wouldn’t be able too bud just say that these people got this shit down it sucks because in your head watching this you was thinking that also but u have some Ill will in you that can’t be happy when someone beats the system you probably watch Cleedess McFarland and think he is the shit don’t u 😂😂😂😂😂😂😂😂 goofy people
I've lived where resources were limited to include wealth. I'm always fascinated by human ingenuity to keep daily life moving in the right direction. Having resourceful friends to help keep food on your table is wealth beyond measure. Well done, gentlemen 💯👍
오늘도 평화로운 파키스탄 형님들
용접기 산소 선반만 있으면 못만드시는게 없어요
이게 뭐야 자동 음성지원ㅋㅋㅋ
Any were else they would hve thrown it out,but you see when you don't have access to new parts you become creative, they are the best machineest I've ever seen👍👍👍
Unless this is a very low powered flywheel's operation is completely dependent on tightness of the threads that the guy turned in by hand even with a bottoming shelf or tapered threads. At this point this flywheel still needs to be welded, as it sets it's not a finished product.
Masterpiece Amazing Work ! Truly Expert Mechanic !
As long as you dont dump the clutch or carry a load that's more than 1,500 lbs, you should be ok
Good to see the guy is making due the best he can
Imagine u hit reverse and ur flywheel just start dancing inside ur transmission
It's amazing how engine flywheels can be recycled 😊 From Japan 🇯🇵
Machinists do awesome work!
OR …. Just because you Can , Doesn’t mean you Should….
True environmental hero can fix stuff and prevent it going to landfill for a broken part
The first time I’ve seen a mechanic with a lathe in his workshop 🤔😂😂
Неужели до такой степени все плохо, приходиться маховик ремонтировать которому уже место в металлоприемке
I knew someone that raced 1/4 mile on the track and had a flywheel explosion, it came up through the floor and cut the steering shaft and he crashed and died . There’s not a chance in hell I would ever fix a broken fly wheel no matter how good it looks afterwards, invisible cracks could be everywhere in that thing . Scrap metal is where that belongs .
Nice, he built a giant screw to make the next swap in two weeks easier for him
Stress cracks dictate that that flywheel has seen its last clutch.
Aside from the obvious failure potential, it seems that buying a new flywheel would be more efficient and economical, given the labor expended in the repair.
It's great work, good quality and finishing
Молодец! Только резьбу, надо было на горячую посадить👍