It's really helpful THANK YOU. can you add a new video how and what sequence the pannels are to be opened Plus how to change the headlight bulb ..... Please
Thank you. I am glad I could help. And yes, I plan to do a long video that will cover all that when I do the oil cooler install. Definitely more to come, so please sub.
People need to SERIOUSLY question the use of full synthetic motor oils! The engine must be built to operate with the thinner oil. Check your owner's manual.
It's about the viscosity. 10w40 is what the bike likes. It being synthetic means it won't break down as fast and can handle higher temperatures longer.
So I have a link for the oil cooler I ordered in the description of this video, but I have not put it on yet. So far its been doing great without it. As it starts to get warmer out, I'm sure ill need for longer rides. I plan on installing it, in about a month or so. Check out the links in the description, I hope that helps.
@@DOHowen Thanks bro, by any chance do you know which is the Front Brake Lever for this bike mine broke I need a new one and venom motorsports sell all the bikes parts 10x more expensive than online.
How do you know which part to look for since it’s a Chinese clone bike? I’ve been wanting one of these for a while but I’m afraid I won’t be able to find the right parts to fit
Yeah, its not always easy. Check out different forums and try to research as much as possible. As for my X24, the frame is a Ninja and the engine is a Honda clone.
@@DOHowen okay awesome thanks and I really appreciate you replying it means a lot. So besides the x24 specific parts, you’d get parts that would fit the ninja and Honda elements then? Also after your “yammie noob review” video, I checked out his videos on that and really didn’t agree with some things. I know people who started with clones and after some tweaks and basic mods, they really enjoyed the bikes and learned from them.
@lonzocapone3220 the oil light needs to be reset. There is two buttons on the dashboard. Turn the key to on and then hold down the left button for 15 seconds. The oil light will reset.
Can you sit on the bike and take a close picture? I just want to see how big the bike is or looks like. Just want to get a feeling. It is hard to tell with out a person sitting on the bike
I still use the stock air filter, the oil filter is just a screen filter that came with the bike. There really is no point to get an aftermarket one. I hope this helps your question.
@@DOHowen i LOVE my bike!!! Ive had it abt 6 to 8 months now and im FINALLY getting to the point where im maxin it out and need more power lmaoo its great tho! And thanks for subbin! No never heard of em ill check em out now! 👌
Thanks for the demo!
You bet!
Could you do a video on changing the sparks plug and muffler?
good point. Ill do that soon.
Can you also do a video on replacing your tamp sensor please? Great information video my boy. Keep doing what you doing jit!!
Thank you. Now that I have more time, ill get out there an post more about the bike.
Another great video 👍👍
Thank you for the support. I'll have more coming soon.
This is extreamly helpful. Thank you soo much DOHowen 👍
Glad to help out.
Thank for video I have the same bike and I didn't know where the oil filter was I had done 3 oil changes without cleaning the oil filter now I know
That's great, I'm glad I could help out.
Yeah, the weather in Texas is never consistent.
Yeah, Texas is bipolar.
Definitely. It will be nice here soon.
Can you also do a video on replacing your tamp sensor please? Great information video my boy
yes :)
It's really helpful THANK YOU. can you add a new video how and what sequence the pannels are to be opened Plus how to change the headlight bulb ..... Please
Thank you. I am glad I could help. And yes, I plan to do a long video that will cover all that when I do the oil cooler install. Definitely more to come, so please sub.
Thanks bro! ✌️
No problem 👍I hope this video helps out. Let me know if there are other topics you want me to try and cover.
People need to SERIOUSLY question the use of full synthetic motor oils! The engine must be built to operate with the thinner oil. Check your owner's manual.
It's about the viscosity. 10w40 is what the bike likes. It being synthetic means it won't break down as fast and can handle higher temperatures longer.
Thank you for the video very helpful 🙏🏽
Glad it was helpful!
Helpful video. Thanks
Glad it was helpful!
Good video. 💯
Thanks 💯
I wonder if they'd be open to a revised warning sticker on fuel tank.
Lol, they are just silly on the translation 🤣
You need to take the xpro to the track
Check out my other videos. We do go karting as a family
Brother your absolutely good with this bike..tell me about your bike needing an oil cooler? If so is there a link.. Or does your bike not require one
So I have a link for the oil cooler I ordered in the description of this video, but I have not put it on yet. So far its been doing great without it. As it starts to get warmer out, I'm sure ill need for longer rides. I plan on installing it, in about a month or so. Check out the links in the description, I hope that helps.
Good vid bro.
Appreciate it
Do you have a video about adding an oil cooler for this bike?
I have not put it on yet, but I have an up date about it. Its a good idea, if done correctly.
This about too be my 1st bike I buy I wanna learn the details and the facts and how to work on my bike when I get it🫶🏾💯
Definitely a good bike for that. Just take your time and start off slow.
The tamp senser is unavailable is there any other tamp senser i can grab up that is available??
Not sure. Keep checking and just look to see if there are other purchase options
Boom venom
Yes, but Xpro is based in the USA and will give you support if anything happens
Hey bro I have a question.. so I see you said you replaced the TEMP PRESSURE SENSOR? How was your bike running before you replaced the sensor?
It ran fine, but would die out every now and then. I also feel that it was a bit faster after I replaced it.
Should the oil filter be changed or just cleaned?
Just cleaned.
Is this bike same maintenance to this bike which i have Venom SuperBike | 250cc Motorcycle | Fuel Injected | 6 Speed
Yes.
@@DOHowen
Thanks bro, by any chance do you know which is the Front Brake Lever for this bike mine broke I need a new one and venom motorsports sell all the bikes parts 10x more expensive than online.
I unfortunately don't. Reach out to Power Sports Max in California. They sell parts as well.
How do you know which part to look for since it’s a Chinese clone bike? I’ve been wanting one of these for a while but I’m afraid I won’t be able to find the right parts to fit
Yeah, its not always easy. Check out different forums and try to research as much as possible. As for my X24, the frame is a Ninja and the engine is a Honda clone.
@@DOHowen okay awesome thanks and I really appreciate you replying it means a lot. So besides the x24 specific parts, you’d get parts that would fit the ninja and Honda elements then? Also after your “yammie noob review” video, I checked out his videos on that and really didn’t agree with some things. I know people who started with clones and after some tweaks and basic mods, they really enjoyed the bikes and learned from them.
@@jamecotto9966 yeah, his videos are definitely from his point of view, not everyone's. These bikes are fine, just not fast. But for me it's enough.
Have you had to adjust your chain ⛓️💥
I have not yet, but I think I am going to have to soon.
Wonder how hard to take stuckers off
I know people who have done it, but looks difficult to me.
👌🏾👌🏾👌🏾👌🏾👑
Thank you for all the support. I really appreciate it.
@@DOHowen 🏍️💨💨💨💨
Hey, my oil filter is not located in that spot where could it be?
You must have a different engine. Check the owners manual to see where it is.
@@DOHowen The owners manual does not tell me where it is at please helppp
@@DOHowen I have changed the oil and my oil light is still on
@lonzocapone3220 the oil light needs to be reset. There is two buttons on the dashboard. Turn the key to on and then hold down the left button for 15 seconds. The oil light will reset.
@lonzocapone3220 Take some pictures of your bike and post them to one of the Xpro/Chinese motorcycle groups on FB. Hopefully, that will help.
Do you know were is the oil filter at?
The oil filter is the screen that is pulled out and cleaned in the video.
May I know where do you buy for oil filters?
@@paschalmg2523 No need to buy one. It's just a screen filter on it. Just clean and reuse.
Type of gas this bike takes? Also have any vids on how to change the TMAP and spark plug?
It takes any unleaded gas, but I recommend using ethanol free gas for sure. As for other videos, ill do what I can to get something out soon.
Do I need to clean the oil filter I don’t have a air compressor or a bit big enough to take it off
Yes, just clean it, not replace.
What size wrench for the oil filter
It should be 24mm
@@DOHowen thank you awesome video
@@Elmurcielago_84 Thank you
So add 1 1/2 quarts of oil after draining the old?
Yep, same here.
Can you sit on the bike and take a close picture? I just want to see how big the bike is or looks like. Just want to get a feeling. It is hard to tell with out a person sitting on the bike
Very good point, Ill definitely do that. And you can look up Kawasaki Ninja 300, its the exact same bike, but with a different engine.
I’m 6’3 and the bike just about comes to my waist. It’s it’s actually nicely sized.
Where did you get the tamp sensor and what kind?
I got it from amazon. I have a link in the description for it
Which tamp sensor did you end up going with?
check out the links in the description. Everything is there.
Brother capacity oil 250
1.5 quart of oil
@@DOHowen thanks
What’s the brand/ name of the filter you use?
I still use the stock air filter, the oil filter is just a screen filter that came with the bike. There really is no point to get an aftermarket one. I hope this helps your question.
What part of texas bro? I have the same bike and my brother lives in El Paso
I'm in San Antonio. How do you like your bike so far?
I just subscribed to your channel as well. Do you ever watch Bay Area Bugs?
@@DOHowen i LOVE my bike!!! Ive had it abt 6 to 8 months now and im FINALLY getting to the point where im maxin it out and need more power lmaoo its great tho! And thanks for subbin! No never heard of em ill check em out now! 👌
Part number??
links in the description
Can you also do a video on replacing your tamp sensor please? Great information video my boy. Keep doing what you doing jit!!
Thank, I will.
Where did you get the tamp sensor and what kind?
I got it from amazon. I have a link in the description for it.
Can you also do a video on replacing your tamp sensor please? Great information video my boy. Keep doing what you doing jit!!
yes :)