I got this from your review, as alot on Amazon say what rated for but nowhere near and if you hammer it can go on fire.... Got it in my van and locked up my TV and PS4 and heater all at same time does great job. Thanks for helping me get the right inverter
I bought this three years ago. I loved it. I used it to run Pro level Photo Flashes on location. It worked great for three years. Was able to do a photo shoot with 4 Interfit Honeybadger Flashes hooked up at the same time. Unfortunately this summer it gave up the ghost when I hooked up a battery to it. It did a fantastic job, i was sad to lose it.
if i am not wrong, the buttons on your fireplace have 3 configurations: 1kW, 1.5kW and 2.5kW - when both buttons are ON and that is what you presented.
another thought is: power out from the inverter equals (more less) the power drawn from the battery. lets say you draw 1000W. math equation A = W/V A = 1000W/12V = 83 Amps!!! (from the battery to inverter) the wires you have there are nowhere close to what they should be. they would melt and cause a fire. take care.
I just got the 1000 pure sine version of this. Noticed pressing the on button quickly makes it come on for about 5 seconds and then shuts back off. Have to long press the power button to keep it on. Also, won't shut off without disconnecting. That'd weird to me. Fan never shuts off even without a load.
check the wattage of the refrigerator, that's what this video basically proved... it powered the 1000 w function of the heater, but did not power the 1500w function....
It can run my older french door full size fridge, It's the inductive load at startup that's the issue with smaller inverters, but once its running my fridge runs at 170watts.. This inverter at 1200+ watts can get past the inductive startup, so is fine for an outage in my case.... but i'm probably walking a fine line as my other 1000 watt inverter will not start my fridge consistently.
It likely will, my 1KVA UPS starts and keep the office mini-fridge running no problem, but this model outputs a modified sine wave (basically a step wave) and that's not the best to run a motor, the steep transients will waste power and make the compressor run hotter/with less torque than it usually would. It will be fine for a short period of time (preventing food from spoiling during a power outage), but wouldn't recommend running a refrigerator long term on a modified sine wave! Good news is that a 1000w pure sine wave model exists ;)
But does this gadget unnecessarily scream a bloodcurdling, deal·breaking beep when it's unhappy? And is it totally useless when the engine is shut off?
Not unnecessarily. Also, thi inverter should be wired directly to an independent battery with an inline 100A fuse) so it matters not what your car engine is doing.
its cool but i would said buy 3000 watts inverter and some 12 volts battery 100 amp lithium battery sola panel and sola charger build your own nice video
Thanks for the video, but you haven’t let it run long enough to notice the problems. I am quite sure there will be problems when you let the heater run long enough by pulling power from a 12v battery. Be careful buddy.
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
I got this from your review, as alot on Amazon say what rated for but nowhere near and if you hammer it can go on fire.... Got it in my van and locked up my TV and PS4 and heater all at same time does great job. Thanks for helping me get the right inverter
its still work?
I bought this three years ago. I loved it. I used it to run Pro level Photo Flashes on location. It worked great for three years. Was able to do a photo shoot with 4 Interfit Honeybadger Flashes hooked up at the same time. Unfortunately this summer it gave up the ghost when I hooked up a battery to it. It did a fantastic job, i was sad to lose it.
if i am not wrong, the buttons on your fireplace have 3 configurations: 1kW, 1.5kW and 2.5kW - when both buttons are ON and that is what you presented.
I had one of those I sent it back in a week
Why?
Idk .those cables look too thin to handle 1200watts continuous use & i wouldn't recommend gater clips either .🤓 hardwire connection preferred 👨🔧
I don’t understand what happened with the lightbulb?
🙀
Thanks for the vid. Looking at this one on Amazon.
another thought is: power out from the inverter equals (more less) the power drawn from the battery. lets say you draw 1000W. math equation A = W/V A = 1000W/12V = 83 Amps!!! (from the battery to inverter) the wires you have there are nowhere close to what they should be. they would melt and cause a fire. take care.
if the inverter is not efficient it could draw well over 100 amp. I repalced my main leads right away.
What kind of battery do u recommend for this Bestek 1200w
Do you think this can run higher than 15v input voltage..? Looking for one that runs off a 4s Lithium pack.
Thanks for the review and demo
Should it make a woowenig sound when connected to 32inch 125V TV?
I just got the 1000 pure sine version of this. Noticed pressing the on button quickly makes it come on for about 5 seconds and then shuts back off. Have to long press the power button to keep it on. Also, won't shut off without disconnecting. That'd weird to me. Fan never shuts off even without a load.
I have a 3000 watt pure sine inverter with a 24 volt system and 30 100w batterys why will it not charge my 2021 chevy bolt ev
Is the battery connected to anything?
Can you please do a follow up. Thanks
I wonder if this is enough to run a full-size refrigerator. It'll be nice to have during power outages to ensure they food doesn't spoil!
check the wattage of the refrigerator, that's what this video basically proved... it powered the 1000 w function of the heater, but did not power the 1500w function....
It can run my older french door full size fridge, It's the inductive load at startup that's the issue with smaller inverters, but once its running my fridge runs at 170watts.. This inverter at 1200+ watts can get past the inductive startup, so is fine for an outage in my case.... but i'm probably walking a fine line as my other 1000 watt inverter will not start my fridge consistently.
great idea. my fridge draws 50W and that is only when it's running which is like 20 minutes in every hour.
It likely will, my 1KVA UPS starts and keep the office mini-fridge running no problem, but this model outputs a modified sine wave (basically a step wave) and that's not the best to run a motor, the steep transients will waste power and make the compressor run hotter/with less torque than it usually would. It will be fine for a short period of time (preventing food from spoiling during a power outage), but wouldn't recommend running a refrigerator long term on a modified sine wave!
Good news is that a 1000w pure sine wave model exists ;)
@ 4:07 What happened? LMAO 🤣
Is this pure sine or modified?
They do two versions, modified and pure. Think the pure is only 1000W though
Always buy the PSW type.
How about the size of the battery?
used Lithium battery 100 amp
Hi wat battery do you recommend to use with this inverter I'm thinking of buying one of these
12 volt Lithium battery 12 vots 100 amp or 12 volt 10 amp
But does this gadget unnecessarily scream a bloodcurdling, deal·breaking beep when it's unhappy?
And is it totally useless when the engine is shut off?
Not unnecessarily. Also, thi inverter should be wired directly to an independent battery with an inline 100A fuse) so it matters not what your car engine is doing.
Nice what the came used ?
Can you please show what you connected it to?
12 volt battery used lithium battery 100 amp best
its cool but i would said buy 3000 watts inverter and some 12 volts battery 100 amp lithium battery sola panel and sola charger build your own nice video
How is this holding up?
Great
Still using it till this day in my RV
so I can clearly run my 1000w ninja blender
You are run 2500w
Amazon makes inverters?
They sell inverter ok
Thanks for the video, but you haven’t let it run long enough to notice the problems. I am quite sure there will be problems when you let the heater run long enough by pulling power from a 12v battery. Be careful buddy.
It run up to 1700w go see my video man
I was closer to 2kw on mine at 240v although I will mostly be running 1.1kw - great inverter though
dude what about a tv or a range, you try your little lite bulb and you blew it learn what you are going to do before making your video.
Why’d that light bulb blow?
es ist very, very bat
Rubbish