SunnySky motors, Walksnail settings and greetings | Hee Wing T2 Cruza EP:06
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- In this episode the motors of the T2 have been swapped out to a set of SunnySky motors (which actually didn't make it into sale). As mentioned in previous episodes these had to be tested.
Further we take a look at some settings in Walksnail to make a sky don't burn out and give this awesome looking scenery.
And finally I would like to send some greetings out ... :)
Hope you like the footage - there is still so much more to come !
Get your T2 Cruza ... you wont regret it
www.heewing.co...
Wanna buy me a coffee? here you can: www.buymeacoff...
You can join us on Telegram as well:
t.me/+BFCQMjCl...
Notice on affiliated links
====================
Some links may be affiliated. This means, if you buy the linked items on the particular page, we will get a little benefit.
We use this to buy our stuff on our own. In short terms: By buying these items, you help us keep going!
You can support us by clicking on this link :
Notice on affiliated links
====================
Some links may be affiliated. This means, if you buy the linked items on the particular page, we will get a little benefit.
We use this to buy our stuff on our own. In short terms: By buying these items, you help us keep going!
You can support us by buying your stuff at
www.ftcrc.com ... that helps us along :)
➡️ SUBSCRIBE for more
====================
www.youtube.co...
#heewingt2cruza #sunnysky #walksnail
Daumen hoch und Grüsse aus Kopenhagen. Out-of-this-world spectactular video! Bravo!!!
Mange tak, Mike - håber find X6 er stadig i drift?! We gotta talk soon
6:50 Beautiful view 🌄
I was stoked to see that too
Give us a T2 buy guide Sir 🙏
A T2 buy Guide? What do you need? ;)
@@JustFPV-net actually I order a speedybee F405 wing and and I wanna know to start building a cruzer lime you. By the way Iam gonna use dji O3 system on it
Is there a reason you're not using the Walksnail OSD Overlay tool to render the OSD onto your video? You seem to be using some sort of chroma to do it...
Shannon … nice to see you here. I’m in fact using the walksnail osd tool as I generate the chroma overlay with it.
That gives me more options in the edit
Would love to know how/where you've mounted that tail-cam - looks great
Hi Andrew .., take a look in the previous episodes … there i introduced it
Hi sir, can you tell me, how you put the LED? I mean, did the wiring parallel and power source is?
The LEDs are wired to the power that also supplies the other LEDs in the wing. Simply attach to the pins on the connector
Hello! I'm having trouble getting my OSD to show up. I'm currently using the Walksnail GT Kit with the Heewing FX-405 VTOL Flight Controller (on Ardupilot 4.4.2).
I've followed setup videos to the T, but no matter what I try, I cannot get the OSD in the goggles. I get video just fine, but no OSD! (I have the Goggle OSD set to Auto).
I'm using OSD_Type 5, Serial_Protocol 42, and Serial_Baud 115.
Any help would be greatly appreciated!
Uh … sadly I don’t know 🤷♂️ Ardupilot is tricky for me
So the Sunny Sky motor x2216 is better than the stock motor FX2216 ? What is the differences?
I found that the sunnyskies consume less energy to do the job! 5A less at launch … I find this to be a good indicator
@@JustFPV-net yes 5A less is great. I might upgrade them on my T2 soon :) Still need to do maiden first on stock engine.
@@Sebas-lk3jv the stock ones are cool too, so no worries
@@JustFPV-netwhat kind battery did you use sir? 6s1p? Lipo? Liion? Or 6s2p? thanks
@@erlandfpv Usually the T2 is loaded with 6s2P ... either P42A (8400mAh) or in the future with some Samsung cells (10000mAh) ...
I'm interested to know if you can switch between the nose and tail cams while in flight? And if so, how you achieve that?
That’s a good question - and the answer is: no, I can’t! Yet I would love to have that ;-)