I only paid $80 to straight pipe it from the cats so if you are paying more than $100 for just a muffler delete you need to go to a different shop. The guy I talked to said he charges $10 a weld each end of the pipe, $5 to put the truck on his lift, and $15 for the pipe. Completely worth the money imo.
Dylan Pierce Decosky My stock head unit was a 6 disc cd changer and that’s it. No auxiliary, no usb, no Bluetooth. So for years I listened to the same couple of cds. So finally I had enough of that and got a new head unit and now I get to use Bluetooth (or auxiliary or usb, but mostly Bluetooth) and I don’t have to listen to the same 30 songs on repeat.
Somethings that you have missed , its not a big deal. But you can do -bluetooth aux cords / usb -drilled and slotted brake rotors -led strips for interior -Used Aftermarket Intake -paint interior parts -Port ThrottleBody -Bigger Throttle Body, like if you have a 5.3 , you can get a 6.0/6.2 Throttle Body -components (sound system) All this under $200 guaranteed .
@@rekklesscc9204 ...video on the difference??? Like for an audio of stock manifold then with the headers? Not really man I'm sorry. But there should be a clip of them at the end of the pics in this Instagram post...frm my page... Theres some audio stuff from couple years ago on there maybe. I probly should get an updated actually walk around video for the tube tho, with cold start up etc... It's just that it's also got the last cat removed there is still one plus the small pair in the y-pipe, going to this burnt blue tip double muffler!! 😭🤣its nOt rEally truck "rice-y" tho. It rocks it well & gets down. I'm able to mess with baffles on this set up, in, or out, fully, then in splayed open/ in splayed closed etc... it rEally changes the tones minimally effecting flow 👍 Furthermore, they have rainbowed very nicely, I've been through a few winters with red dirt slush getting eVerywhere, they wipe right off basically, i ride w/out the wheel well trim cause they do still look good in there. They definitely woke up some response, alot actually but I'm also running a giant intake cone & superchips advanced 91octaine tune LoLol its peppy asf. Has eaton Detroit Locker with 4.10's. 💪🔩🔧🤙After seasoning it maybe with some more mileage in future will add Eaton m62 or other nice low boost set up supercharger. 👌 gunna be lit, cuz then it can really hang out with the pops'es 6.oh king ranch, not just smashing it on highway pulls, pretty much does that n/a allready on the highend actually, but from a dig too would be nice. Heck it probly run with our Camaro & my bikes even...hehehe yeet! (Sry for the story book late response, dint notice initial reply b4) instagram.com/p/BkPJC76hEa1/?igshid=1s9o131pqyysn
@@hillbillyhomeboy4121 ebay/amazon should have them...they are semi brandless* but I'd definitely look for usa seller...they get the shaped tubes & weld them might find some named "dna" but long as its stainless I'd say your good to go. I got a set with one upside down flang, they told me they dint know how that passed inspection but immediately shipped me out proper set. One thing to note various types maybe welded on inside and have two like tack-welds on outside...some have nice full welds on outside & inside 💪🔩🔧🤙... So, Can be a little picky w/em for sure but they are definitely good quality & affordable asf.
Towhooks, opens up a hell of a lot of options if you do it like I did. I bolted 2, foot long class 4 hitch receivers where my tow hooks were on my 89 k2500. That was 25 dollars, then for 50 dollars I ordered some hitch receiver hooks for 50 dollars, made the front pretty mean looking and in the future I can quick swap on a winch or brush guard
I know this is a late comment but in your old f150, I’d really recommend a Bluetooth FM transmitter. You can plug them right into your cigarette lighter and you can just connect your phone to it. Works like a charm for easily under 20$
I chopped my muffler on my 10th gen XL Supercab and replaced it with an offset pipe meant for a GMC and a Vibrant Performance bottle resonator. Sounds nice. Wish I had a V8, but the 4.2 doesn't sound too bad, and I plan on camming it in the future. I need to get the roof and hood resprayed. My truck is the Royal Blue metallic color. My roof paint is starting to crack and peel and the roof has some rust. I wanna do a slight body lift and get some wheels and tall tires, get a nice grille, and replace the droopy headliner. I've already got a toolbox.
I just bought my first truck. I've always had (and still do) sports cars. I had no idea when I spent all that money on a new truck that I'd be dropping another $15K to make it the truck I want. Just ordered a grille, headlights, LED bulbs for the fog lights and rear lights, and a Fox 2.0 Stage 2 suspension package. Next will be wheels, tires, front bumper.
With an older truck, buy an FM adapter. It plus into your cigarette lighter and allows you to use Bluetooth. Amazing upgrade in my opinion and it’s cheap
Proper video topic. In my experience, if you get some budget friendly lights - just take them apart right away and seal them yourself and save the headache later.
I literally am doing almost all these with a chopped off muffler, smoked headlights and taillights, seat and steering wheel covers, a Bluetooth transmitter (which was actually $20 on ebay lol), bullet antenna, paint to match bumper (a lil more than a hundred, but its worth it), a cold air intake system, de-badging, a grill insert, tint and many more to come for my 06 sierra! Lol, love the vid guy!
If you did the exhaust yourself you could afford to have a different muffler rather than no muffler, that way you get more choice in what the sound is like. All you need is the muffler itself, a short piece of matching pipe and a few clamps. My muffler (Spintech 6000) was $100 so I went a little over budget but you can get other stuff cheaper.
Hey, you were right about the headlights. I'll probably change them out on my '98 F150 Larry. It should look 100% better. Keep posting and I'll keep watching!
One of the first things I did when I got my 2000 z71 was get some clear headlight housings and fog lights. Looks night and day different against the red paint... which I need to clay bar and wax lol
spend hundreds upgrading to better brighter headlights to see the road or trail in front of you, then buy and install limo black tint to dim those upgraded lights down to less than what your factory lights put out....cuz it looks cool in the daylight while you stand in front of your truck......👍👍👍👍👍 fkn brilliant
For vehicles with plastic trim, get forever black for about 20 bucks. Put on a couple coats and itll last a little over a year depending on how you use your vehicle. My jeep in az lasts about 8 months. But I offroad it and get her dirty.
Nice work! Love the white! You forgot the WARNING tag: Truck Modding Is Addictive in your intro! 😄😄🤩 Debadge & remove the mouldings. Hint**gently apply heat using a heat gun** Only thing left on mine is front grill Bowtie and an Allison/Duramax badge relocated to the tailgate so they can see what just beat them! WOT!💨💨
I have a 99 f150 that didnt have fog lights. So instead of cutting holes I got a bumper at Pull-a-Parts that had fog lights it cost $40 for whole bumper chrome and below it. Ordered new lamps cause I couldn't get others clean. And installed a rocker toggle in the dash and all was prob $100 or less but changes the look and gives you better vision. You can also get a switch with fog lamps while at pull a part.
Have you thought of taking a eraser wheel and taking off the white pinstripe on the side of Larry? I took them off my ford ranger and it looks a lot cleaner.
For those of us that are bit more vertically challenged we can get chrome looking running boards from everyone favorite store for under $100 (got mine for $97 including taxes and free shipping)
Hey buddy where you get them headlight precut tints at I got a 2019 GMC Sierra elevation all blacked out but they ain’t got no aftermarket lights or anything out for her yet
Type in Ford shorty antenna and get rid of the fishing pole. Also UPRproducts makes lot's of billet items for both trucks that are cheap but make a huge difference.
You should try some switchback led blinkers. They run white like day lights, but when you use your blinkers they flash amber, i have some and they look great
Is it just me or is the older truck much sweeter looking than that new rado? The entire video I kept staring at that older ford for some reason. I’d love to have one of those as a work truck that looks just like that.
I love my 2000 Ford Expy 4wd. It has 250k and runs like a champ! My under $100 upgrade is to add some offroad lights. I may keep the original headlights because I like the look though! My next upgrade will be a light bar maybe, front hitch, and I am hoping to be able to build my own roof rack. A winch will run me over $100, but eventually I will have one.
you can do a decent enough job lining up a front end with a tape measure, a couple blocks that are the same size and a buddy to help hold the tape on the other side. i'm sure there are some videos on how to do it on here. it won't be a perfect job but you can definitely stop it from eating tires and make the steering wheel reasonably straight. a cheap in budget thing one can do is buffing the paint if it's not too far gone. i don't mean waxing it but restoring it. also it'll work well on yellowed headlights. just gotta be careful the coating you put over it so it holds up to the sun. as far as mods go, i'm a fan of used parts. with the right knowledge, you can get upgraded factory parts from the junkyard or from people selling used parts. my old 84 f150 had parts from 81 all the way to 93 on it when i sent it on down the road. yeah they won't be shiny and new but going a better brake booster off a 93 made a HUGE difference when it went. also i put a lower geared 9" in it from an older truck. it all just bolted right up and worked though i had to change the speedo gear on the cable. pulled the o/d transmission out and swapped in an old 4 speed that had a granny gear in it. got that for 50 or 75 from a relative lol. even added a couple leaf springs in the rear to haul more weight than intended for a 1/2 ton. it's just knowing what will work in your vehicle. i also had that old 1/2 ton for years and know my way around the old square body f series better than most. i've also scrapped a few and scavenged a lot of parts from them before they went.in hind sight, buying a 3/4 ton would have been easier and probably better but where's the fun in that?
New to the channel but after watching this you have given me some ideas. I have a chrome front bumper I would like to change to match my black truck but then again I fear if I mess up and not look as good as yours then its another issue going back to the chrome lol. Awesome looking truck btw
First time to your channel. I like your trucks. I have an 06 Ram whose name is Bruce. Just got the wife a ‘new’ 99 f150 yet to be named. Also, my childhood pets were snakes names Bob, Larry, and Fred. Thanks for bringing up those memories
I have a White 2016 Z71 I’ve been moding to look like yours I love it. I’ve done the front so far, waiting on the tint for the lights. I got the 20 x 12 33 Moto metals. The black soft bed cover
a popular mod in Olympia Wa is the free catalytic converter delete...come home,park truck, go to bed, get up for work....job done, without any effort on your part
If you have an old truck specifically and want it to sound nice, you can get a cherry bomb brand glasspack for less than $30 new and some pipe and clamps for under $60 and do it yourself
I only paid $80 to straight pipe it from the cats so if you are paying more than $100 for just a muffler delete you need to go to a different shop. The guy I talked to said he charges $10 a weld each end of the pipe, $5 to put the truck on his lift, and $15 for the pipe. Completely worth the money imo.
You can also do a muffler delete with a hacksaw for free😂
Exactly or a socket wrench
Yea and mess up your motor
It actually won't harm your engine
I spaced my truck exhaust for free
Add washers in the flange gasket
At least you don't have to worry about the "Storm Trooper" hitting anything XD
Hahaha thats a good one
The best thing I’ve ever done to my truck is an aftermarket head unit. 10/10 would recommend lol
Aaron Hester why
Dylan Pierce Decosky My stock head unit was a 6 disc cd changer and that’s it. No auxiliary, no usb, no Bluetooth. So for years I listened to the same couple of cds. So finally I had enough of that and got a new head unit and now I get to use Bluetooth (or auxiliary or usb, but mostly Bluetooth) and I don’t have to listen to the same 30 songs on repeat.
Aaron Hester that was a no brainer me. But apparently people are fine with the radio or cds (psychos)
Double din all the way
@@sdfvmbshdbgsdbv ABSOLUTELY 💯
Did he really go from exhaust to... Stickers? 🤣
jeh
It’s a mod
Adds 5hp
Where my takuaches at
Si kema cuh
Ora keh
Ayyyy
Puros tacuaches🦡 alv
No quema cuh
Somethings that you have missed , its not a big deal. But you can do -bluetooth aux cords / usb -drilled and slotted brake rotors -led strips for interior -Used Aftermarket Intake -paint interior parts
-Port ThrottleBody -Bigger Throttle Body, like if you have a 5.3 , you can get a 6.0/6.2 Throttle Body
-components (sound system)
All this under $200 guaranteed .
What would the bigger throttle body do? Genuinely curious
@@calabreezy-6013 free money delete next time you fill up at the gas station
The taillights on the Chevy should be black like the headlights
chris wells I hope ur not serious... this video is a joke by itself
FuNNy DuBBy how’s this video a joke?
Dre Official these mods won’t help u what so ever, if anything they will make shit worse. YeAh iTs GoT hOcKeY pUcKs iN tHe FrOnT, lmfao
FuNNy DuBBy you are a dumbass💀💀it’s legit to help people on a low budget you fuck
FuNNy DuBBy? Hockey pucks?
Do a “How Much Have I Spent on My Truck” Video
He did its around 3300 I think check the vid tho
Man that painted front end on the Silverado looks good
Stainless steel headers even for my lower mile 4.0l ranger were only like 99$! lolol they are holding up great too.🇺🇸💪
I have a 4.0 Explorer. Do you have a video on the difference?
Rekkless CC i’d say not much. not a huge difference between the 4.6 explorer and 4.6 mustang.
@@rekklesscc9204 ...video on the difference??? Like for an audio of stock manifold then with the headers? Not really man I'm sorry. But there should be a clip of them at the end of the pics in this Instagram post...frm my page... Theres some audio stuff from couple years ago on there maybe. I probly should get an updated actually walk around video for the tube tho, with cold start up etc... It's just that it's also got the last cat removed there is still one plus the small pair in the y-pipe, going to this burnt blue tip double muffler!! 😭🤣its nOt rEally truck "rice-y" tho. It rocks it well & gets down. I'm able to mess with baffles on this set up, in, or out, fully, then in splayed open/ in splayed closed etc... it rEally changes the tones minimally effecting flow 👍
Furthermore, they have rainbowed very nicely, I've been through a few winters with red dirt slush getting eVerywhere, they wipe right off basically, i ride w/out the wheel well trim cause they do still look good in there. They definitely woke up some response, alot actually but I'm also running a giant intake cone & superchips advanced 91octaine tune LoLol its peppy asf. Has eaton Detroit Locker with 4.10's. 💪🔩🔧🤙After seasoning it maybe with some more mileage in future will add Eaton m62 or other nice low boost set up supercharger. 👌 gunna be lit, cuz then it can really hang out with the pops'es 6.oh king ranch, not just smashing it on highway pulls, pretty much does that n/a allready on the highend actually, but from a dig too would be nice. Heck it probly run with our Camaro & my bikes even...hehehe yeet! (Sry for the story book late response, dint notice initial reply b4) instagram.com/p/BkPJC76hEa1/?igshid=1s9o131pqyysn
Sick we’re did you buy them I would love a set for my ranger.
@@hillbillyhomeboy4121 ebay/amazon should have them...they are semi brandless* but I'd definitely look for usa seller...they get the shaped tubes & weld them might find some named "dna" but long as its stainless I'd say your good to go. I got a set with one upside down flang, they told me they dint know how that passed inspection but immediately shipped me out proper set. One thing to note various types maybe welded on inside and have two like tack-welds on outside...some have nice full welds on outside & inside 💪🔩🔧🤙... So, Can be a little picky w/em for sure but they are definitely good quality & affordable asf.
Towhooks, opens up a hell of a lot of options if you do it like I did. I bolted 2, foot long class 4 hitch receivers where my tow hooks were on my 89 k2500. That was 25 dollars, then for 50 dollars I ordered some hitch receiver hooks for 50 dollars, made the front pretty mean looking and in the future I can quick swap on a winch or brush guard
I know this is a late comment but in your old f150, I’d really recommend a Bluetooth FM transmitter. You can plug them right into your cigarette lighter and you can just connect your phone to it. Works like a charm for easily under 20$
I've seen in both 1 ford and 2 gmcs that the transmitters kill stock radio and aftermarkets over time.
Mine has one stock
Or a new head unit much better use of money JVC kw-785bw
“i don’t really do too much in the bed” 😂😂
Needs a gf lol
@@chrisarsenault2224 he obviously has a gf since he isn't spending >$100 on his truck
@@hanithehimbo3382 bru if he had a gf he would barely be able to afford insurance, if hes anything like me at least. 😂
Yea well why do you think hes going for that storm trooper look? Shoot and miss 🤣🤣🤣🤣🤣
I got an aftermarket head unit for 80 and it was totally worth it. Definitely recommend it!
Did you jus call that truck Larry? That’s a perfect name 😂😂😂
Should always be a woman's name. Unless you enjoy riding men.
@@colfrankslade are you assuming Larry’s gender?!?! 😦👀
I have the exact same Larry you can get led interior lights, the tail lights, fog lights, third brake light, cold air intake, led lights all around
Cold air intake way more than 100 clams
This is great
I just got my first truck and I’m having a hard time getting ideas for it
Thanks!
I chopped my muffler on my 10th gen XL Supercab and replaced it with an offset pipe meant for a GMC and a Vibrant Performance bottle resonator. Sounds nice. Wish I had a V8, but the 4.2 doesn't sound too bad, and I plan on camming it in the future.
I need to get the roof and hood resprayed. My truck is the Royal Blue metallic color. My roof paint is starting to crack and peel and the roof has some rust.
I wanna do a slight body lift and get some wheels and tall tires, get a nice grille, and replace the droopy headliner. I've already got a toolbox.
I just bought my first truck. I've always had (and still do) sports cars. I had no idea when I spent all that money on a new truck that I'd be dropping another $15K to make it the truck I want. Just ordered a grille, headlights, LED bulbs for the fog lights and rear lights, and a Fox 2.0 Stage 2 suspension package. Next will be wheels, tires, front bumper.
What type
With an older truck, buy an FM adapter. It plus into your cigarette lighter and allows you to use Bluetooth. Amazing upgrade in my opinion and it’s cheap
I put a whole pioneer system in my 2002 ranger for like 110 so much better then an fm adapter😂
I have a 12 Silverado stock but I’m gonna do a muffler delete now thanks for the tip
Just got my first truck for Christmas and I'm loving it. It's a 2003 Silverado 🥰
I wish i got a Silverado handed to me 😭😭
Best mod (not under $100) has got to be rims and tires.
No shit
Proper video topic. In my experience, if you get some budget friendly lights - just take them apart right away and seal them yourself and save the headache later.
Great video my man. Thanks for sharing mods that might get overlooked by a lot of us. You're a good man!
I literally am doing almost all these with a chopped off muffler, smoked headlights and taillights, seat and steering wheel covers, a Bluetooth transmitter (which was actually $20 on ebay lol), bullet antenna, paint to match bumper (a lil more than a hundred, but its worth it), a cold air intake system, de-badging, a grill insert, tint and many more to come for my 06 sierra! Lol, love the vid guy!
If you did the exhaust yourself you could afford to have a different muffler rather than no muffler, that way you get more choice in what the sound is like. All you need is the muffler itself, a short piece of matching pipe and a few clamps. My muffler (Spintech 6000) was $100 so I went a little over budget but you can get other stuff cheaper.
Hey, you were right about the headlights. I'll probably change them out on my '98 F150 Larry. It should look 100% better. Keep posting and I'll keep watching!
One of the first things I did when I got my 2000 z71 was get some clear headlight housings and fog lights. Looks night and day different against the red paint... which I need to clay bar and wax lol
Definitely the rock lights or smaller light bars or pods
You can get raptor amber lights for around $40, they go on your grill and give a sweet aggressive and modern look to your truck
Tailgate assist $30, harbor freight light bars/ditch lights under $80, window vent visors $60, steering wheel leather wrap $10, LEDs bulbs for plates or interior $14, bullet point mounting solutions under $80
Clean lookin f150
The DeeZee tailgate assist kit! That is a a MAJOR gem!!!
Air horn got mine off amazon $25 great fun!!
What air horn?
Quarentine projects 101
Harry Henry word
Yup
Man... That baby squat look right there was golden
I’ve never thought about just putting regular window tint on the headlights
Where did you get your seat covers?! I've been searching for ones that fit snug onto the seats!
I have a 96 F-150 needs a lot of upgrades.😂
You can also remove mudflaps; and for Bluetooth in older trucks buy a KM18. It’s like $20
AM/FM transmitter cost around 20-40$ I use mine all the tims
spend hundreds upgrading to better brighter headlights to see the road or trail in front of you, then buy and install limo black tint to dim those upgraded lights down to less than what your factory lights put out....cuz it looks cool in the daylight while you stand in front of your truck......👍👍👍👍👍 fkn brilliant
For vehicles with plastic trim, get forever black for about 20 bucks. Put on a couple coats and itll last a little over a year depending on how you use your vehicle. My jeep in az lasts about 8 months. But I offroad it and get her dirty.
I have the same f150 as you, on the right but mine is flareside and I call my truck Larry too because it's a Lariat. Thought that was really funny.
Does the tint on the headlights affect the brightness?
Nice work! Love the white!
You forgot the WARNING tag: Truck Modding Is Addictive in your intro! 😄😄🤩
Debadge & remove the mouldings. Hint**gently apply heat using a heat gun**
Only thing left on mine is front grill Bowtie and an Allison/Duramax badge relocated to the tailgate so they can see what just beat them! WOT!💨💨
No dislikes yet that's respectable
I have a 99 f150 that didnt have fog lights. So instead of cutting holes I got a bumper at Pull-a-Parts that had fog lights it cost $40 for whole bumper chrome and below it. Ordered new lamps cause I couldn't get others clean. And installed a rocker toggle in the dash and all was prob $100 or less but changes the look and gives you better vision. You can also get a switch with fog lamps while at pull a part.
Have you thought of taking a eraser wheel and taking off the white pinstripe on the side of Larry? I took them off my ford ranger and it looks a lot cleaner.
T Thornton did you have to pay 50 bucks or so for your eraser wheel? I’ve been looking into removing the stripe off my ranger as well
Where can you get an eraser wheel?
Soulpancake 54 internet
Gnorm I had an old f150 that had them and I used a credit card and goo gone to remove it. It was really cheap and worked great
Needed this vid💯 rona putting me at a setback with truck upgrades :(
For those of us that are bit more vertically challenged we can get chrome looking running boards from everyone favorite store for under $100 (got mine for $97 including taxes and free shipping)
Larry is a dang good looking truck.
Hey buddy where you get them headlight precut tints at I got a 2019 GMC Sierra elevation all blacked out but they ain’t got no aftermarket lights or anything out for her yet
6:56 hey man😅
I like the paint on the front. Awesome budget mod!
Thank You. Very good information. Just bout a 06 150 with 54k,,, was a plow truck
Wht kind of seat covers are the camo ones? Trying to find some for my truck thanks
sportsman
I'm not a big chevy fan but I gotta admit that truck looks freakin sick.
That dude gets paid by the hour and is waiting on his fleet company to pull him out. He’s good I promise lol
I'm glad I'm not the only one that refers to it as a storm trooper look
Where’d you get your center console cover, mines starting to get messed up
You can order them on Amazon.
Good idea on this one!
Bro, I want my f-150 to sit just like that. Could you tell me your lift/level setup & rim/tire size?
in the video its a 3 inch spindle lift in the front with two inch drop shackles in the rear on 16x10 with 33s
@@ImBradSpencer Thanks brother
Did the lift and tires mess with your speedometer
Dayyyyyyum that white Z71 is ballin
5:10 I did a muffler delete on my 08 4.6 for like 20 bucks, I paid for the piping and did it my self
Type in Ford shorty antenna and get rid of the fishing pole. Also UPRproducts makes lot's of billet items for both trucks that are cheap but make a huge difference.
Do an in depth video of Larry's new exhaust set up please👌
Put some rock lights on Larry!
100 for an Alignment?! I'm doing them for 75😂💯
The place near me does 60 but only because theyve done alot of work with my grandpa and I get a discount 😃
Some trucks have horrible rear bumpers. Like the cat eye Chevys. You can sometimes find a paint matched roll pan to take its place for $100 on eBay.
You should try some switchback led blinkers. They run white like day lights, but when you use your blinkers they flash amber, i have some and they look great
Is it just me or is the older truck much sweeter looking than that new rado? The entire video I kept staring at that older ford for some reason. I’d love to have one of those as a work truck that looks just like that.
I got a '99 5.4 in red pushing 300k miles and im still in love.
I love my 2000 Ford Expy 4wd. It has 250k and runs like a champ! My under $100 upgrade is to add some offroad lights. I may keep the original headlights because I like the look though! My next upgrade will be a light bar maybe, front hitch, and I am hoping to be able to build my own roof rack. A winch will run me over $100, but eventually I will have one.
Nice trucks. Not too flashy but look good
For the headlights and taillights you can just wet sand them instead of buying new. That's what I did with my 94 chevy c1500👍🏼
I've done this to every vehicle then applied a polishing wax and a clear coat for extended life
What if mine are glass
@@marcosv9513 I believe that's what mine are and it worked freat
What size are the rims & tires on Larry?
I got a 1997 f150 v8 4x4 and upgraded all my lights to led best decision ever so much bright as well as a chrome billet grill all under 500
Your trucks are dope🤙🏽
This was awesome bro...thank you!
Larry is an amazing looking truck👍
you can do a decent enough job lining up a front end with a tape measure, a couple blocks that are the same size and a buddy to help hold the tape on the other side. i'm sure there are some videos on how to do it on here. it won't be a perfect job but you can definitely stop it from eating tires and make the steering wheel reasonably straight. a cheap in budget thing one can do is buffing the paint if it's not too far gone. i don't mean waxing it but restoring it. also it'll work well on yellowed headlights. just gotta be careful the coating you put over it so it holds up to the sun. as far as mods go, i'm a fan of used parts. with the right knowledge, you can get upgraded factory parts from the junkyard or from people selling used parts. my old 84 f150 had parts from 81 all the way to 93 on it when i sent it on down the road. yeah they won't be shiny and new but going a better brake booster off a 93 made a HUGE difference when it went. also i put a lower geared 9" in it from an older truck. it all just bolted right up and worked though i had to change the speedo gear on the cable. pulled the o/d transmission out and swapped in an old 4 speed that had a granny gear in it. got that for 50 or 75 from a relative lol. even added a couple leaf springs in the rear to haul more weight than intended for a 1/2 ton. it's just knowing what will work in your vehicle. i also had that old 1/2 ton for years and know my way around the old square body f series better than most. i've also scrapped a few and scavenged a lot of parts from them before they went.in hind sight, buying a 3/4 ton would have been easier and probably better but where's the fun in that?
I love red trucks with black rims and dark windows
Nice to see my truck
New to the channel but after watching this you have given me some ideas. I have a chrome front bumper I would like to change to match my black truck but then again I fear if I mess up and not look as good as yours then its another issue going back to the chrome lol. Awesome looking truck btw
Spray in bed liner is 119 nice idea also Bluetooth cassette adapter
What do u recomend for a 1999 ford f150 to sound loud? Flowmaster, straightpiped, magnaflow, etc?
Which engine?
Just cut off the muffler
Great an FM transmitter and you won't have to fool with the cassette adapter for music
Thanks, saved me a ton of time!
First time to your channel. I like your trucks. I have an 06 Ram whose name is Bruce. Just got the wife a ‘new’ 99 f150 yet to be named.
Also, my childhood pets were snakes names Bob, Larry, and Fred. Thanks for bringing up those memories
I have a White 2016 Z71 I’ve been moding to look like yours I love it. I’ve done the front so far, waiting on the tint for the lights. I got the 20 x 12 33 Moto metals. The black soft bed cover
a popular mod in Olympia Wa is the free catalytic converter delete...come home,park truck, go to bed, get up for work....job done, without any effort on your part
You could get an fm transmitter on Amazon for Larry to listen to Pandora from your phone through Bluetooth.
Thanks for the information
You could put on a small grill gard or full face one.they look really cool.
Where did u get your camo seat covers for baby squat?
Helpful tips for people 😁
If you have an old truck specifically and want it to sound nice, you can get a cherry bomb brand glasspack for less than $30 new and some pipe and clamps for under $60 and do it yourself
Where'd you get them seat covers
I use a FM transmitter for Bluetooth in my old f150 and its only $20 on amazon!