Did you get a check engine light for this? I had a code pop up and can smell fuel in the rear passenger seat so I’m curious if this could be the issue or if it might be more of an internal flow issue.
Hello, I am attempting to fix the same issue in my 2009 CTS-V and I’d like to ask if you have a diagram of where to cut the access hole. Thanks for the video.
Drill a small hole approximately where the flared square corner is. Make sure not to drill too deep. Then make it a little bit bigger and look through with a flashlight to see where the fuel pump is exactly and start cutting.
I have been at home depot for over an hour trying to put this set up together and i can't seem to find the right hardware to make it work. You have links to elbows, connections, or taps?
Did you get a check engine light for this? I had a code pop up and can smell fuel in the rear passenger seat so I’m curious if this could be the issue or if it might be more of an internal flow issue.
Check if your gas tank looks wet with fuel from the bottom or if it’s dripping from tank area
@@haroot8333 I checked earlier and I have not caught it dripping but it is wet and I just finished driving. I got code p2635 for pump flow
@@sorrynotbryant7401 okay so there is probably most likely a hairline crack on the fitting.
@@haroot8333 just checked again and It forms drips
@@sorrynotbryant7401 gotta cut the hole and diagnose
Dude doin all this, hacking apart his fucking car and doesnt even know what a fucking hose clamp is lmfao
What year is yours?
What size are the barb fittings ?
Hello, I am attempting to fix the same issue in my 2009 CTS-V and I’d like to ask if you have a diagram of where to cut the access hole. Thanks for the video.
Drill a small hole approximately where the flared square corner is. Make sure not to drill too deep. Then make it a little bit bigger and look through with a flashlight to see where the fuel pump is exactly and start cutting.
I have been at home depot for over an hour trying to put this set up together and i can't seem to find the right hardware to make it work. You have links to elbows, connections, or taps?
Try autozone or other parts stores oreilly or pepboys
Where did you get the extra hat? Did you use the flex home that was on the original hat?
I had an extra gas tank
Remove the oem connector from the pipe then jam the pipe onto the Barb
Yea for the hose on top what about the one on the bottom
@@dsafrit07 just replace it idk