How to create an NFT collection - Ultimate guide
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2021
- Welcome to the one video that you will need to fully upload an NFT collection onto the Ethereum or Polygon network. I had a lot of fun creating this video and I hope you have just as much fun following along.
Twitter: / hashlipsnft
Website: hashlips.io/
HashLips/HashLips Lab provides educational content and open-source code for informational purposes only, without any express or implied warranties on accuracy or completeness. Our materials are not intended as financial or professional advice and should not replace professional judgment or expertise. The use of our content and code is at your sole discretion and risk.
Please note, that our resources are not financial advice. Decisions made based on our content are the user's responsibility, and HashLips/HashLips Lab assumes no liability for any direct or indirect losses, including but not limited to data loss or profit loss, that may result from utilizing our educational materials or open-source code.
#react #generativeart #generative #art #node #javascript #coding #smartcontract #programming #matic #polygon #network #maticnetwork #polygonnetwork #nft #nfts #nftinvestor #hashlips #code #safelips #hashlip #game #solidity
At some point, you will be so rich. Simply because of all the people you helped reach their goals and who will give back to you. You're the true MVP in this community.
Thank you for the kind words
Thank you thank you thank you times a billion lol 😆 🙏
@@HashLipsAcademy brother man, if we mint our own nft's with the intention to send them to various wallets, is there a quick easy way to do it ? i was hoping to send out 10% to 100 different wallets ? or an easy way to airdrop ? cheers and thanks again
@@kezza10mail does it cost gas to sent the transaction as free gift?
@@kezza10mail this has been my question for some time ! Join his discord , found some help as well as a developer to help me run our collection
Timestamps
-------
0:00 - Intro
5:48 - Program Installations
8:56 - Join the community
10:48 - Artwork Layer Creation
16:01 - Art Engine
34:57 - Thunder🌩
49:37 - Metadata Upload & IPFS
56:30 - How to create hidden images and store them in IPFS
1:03:01 - Contract Deployment
1:54:41 - Verify Contract
2:00:00 - Remix Tips & Tricks
2:06:28 - The Dapp
You are a rock star.🔥
Not all heroes wear capes
Thank you 😊
U forgot the thunder at 34:57 🌩
God
My advice to new investors: Buy good companies stocks and hold them as long as they are good companies. Just do this and ignore the forecasts and market views which are at best entertaining but completely useless
May I ask which stocks are good? I've been looking at a few different ones but want others' opinions as well
what i think you need is a Financial Adviser, who can help you get in and out of any stock you buy at any time and you'd sure be in Profit
who would you recommend?
TERESA JENSEN WHITE, That's whom i work with
i have seen loads of news of Marissa Saponare on the internet, she must really be that good for she to be talked about in such a way..,is MARISSA SAPONARE on youtube? please how do i reach her
Thank you for taking the time to put out such an indepth, anyone can make content but the pride in your efforts is apparent and appreciated
You are fantastic. This thing runs out of the box and is just wow. Thanks a lot for sharing this in such an understandable way and in this high quality.
This is freaking amazing. The amount of resources you just provided is insane. Thank you so much!
You really helped me a lot. Thanks mate. I‘m gettin started right now and you make it all a lot easier for me. I will join the community for sure. Great what You have build 💪🏽💯
Great channel! Been a subscriber / fan for a while. This is an epic and awesome tutorial! Well worth the time. Thanks for sharing. Bought some of your NFTs in support...plus they are also pretty cool.
Thank you for everything you do. It's really incredible. Your level of synthesis is impeccable
Can’t wait to watch all this tmwr . This is the same length as a movie but way better 😭🚀🚀 you are the G.O.A.T 🐐🐐
Much appreciated 🙌🙏
Amazing Tutorial! You're a great teacher and with absolutely no experience with coding I was able to easily create my collection and dapp! Thank you!
You are a Godsent, you have made the nft collection process so much simpler and quicker to understand.
This is the first time i tried to do this kind of thing. Thank you so much for your epic tutorial! I already have my collection ready to be minted because of you. You totally rock!
how is it going (:
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
I just wanted to give you a massive thank you! I've been looking for weeks for a guide that was perfectly structured and well explained and you are the only person that does this! You deserve all the praise and hype that surrounds you. I'll be minting my first NFT collection soon with your amazing help and I'll definitely send you an NFT. Many thanks and keep doing what you're doing 🙏🙏
what smart contract i have to use if i want to publish on solana
your collection is out ?
@@Tntbcv yes, first 100 Punk O' Lanterns are available and searchable on OpenSea
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
Thank you for this tutorial, I've been so lost and limited with resources. I'm glad you teach open source software like this so I can breakthrough into tech. Worth a subscribe ngl.
Love the detailed of this video, super nice, I am going to create one nft out of the layers I created, hope everything goes smoothly. Thanks for the code and programs
Wow, you've taken your great series & made it simpler. Your content just keeps getting better. We can just replace what we've worked with (your more in-depth series + our add-ons) in this same structure - 3 files, Art, Contracts, Dapp. 10k around the corner, 25k soon. Thank you!
🙌 Want everyone to have a simple experience 😁
You have no idea how much I value the content you have put together. I'm a software engineer and understand how much effort you have put into this. Do you have a contract implementing commissions/royalties that we can use instead of the one you use on this guide and do you know how would that work with the OpenSea limit of 10% royalty? Thank you!
You are truly a legend. I mean the video itself is 2.5 hours but to do so, you have spent an enormous amount of time in getting your codebase ready and then on top willingness to share it openly with the community. You are the best, stay blessed.
Haven't git cloned yet, but super excited to rock a project out with your awesome tutorials. May your youtube paychecks be warm
Sending a massive thanks for saving me so much time with my NFT project my friend! I had originally planned to hand make thousands of unique collectibles and am grateful I stumbled on your account and tutorials. Appreciate you taking the time to educate us 🙏
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
This tutorial is Seamless! I remember having some struggles in some of the previous ones. But now, once my layers are together, I can literally have everything up and running in days! Thank you!
It's a pleasure I'm glad it helped
Hi @afootballlife
Please how can I create layers
@@umehstanley3140 check this out th-cam.com/video/AaCgydeMu64/w-d-xo.html
I love the storm in the background. That is my favorite part. It's like a meditation track, AND a tutorial. Win & win.
This is the best guide for both creating and NFT project, and also a really good introduction to solidity
Wow! You are the master of NFT. You should be the only one allowed to publish videos about this topic! Thank you so much!!
🤯😁🙌
Watched the whole thing. I never had a problem, but I'm sure this is a "lifesaver" for many. I will probably use this as my base (with some add-ons) from now. Thank you. Stay amazing! 💗🎨
🙏🙏🙏
what smart contract i have to use if i want to publish on solana
You... Man... Thank you so much. I don't know what else to say. I'm a programmer so it was easy to follow but I'm sure beginners can also follow along without any problem. You're a genius! You have all my respect.
One of the most helpful people in the entire NFT space
you are changing many lives for the good , bless what you do , all that hard work and knowledge into the community that burns with a fire to want to learn and you provide the best guide. Thank you so much!
Thank you for the wonderful feedback. It's because of feedback like your that makes me do this with a smile.
@@HashLipsAcademy everytime you upload you put a smile on my face. Keep doing what you will do I’ll always be here part of the community 👍
you are adding a true value to the NFT community as a whole, much respect man 💗
Thanks man
@@markjapan4062 I am already using for 7 months and happy with it. So it is just not for all people.
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
I am very grateful to you for telling me in such detail what I have been looking for for many months.... Thank you)
Was searching lot from a long time but wasn't able to find a good tutorial. Thank you so much for this video . It is much easier to understand . You are awaesome ❣️❣️
thank you thank you thank. I was just an artist, but now I can generate art, create ipfs/smart contract and so much more. Your videos are dope af
Hi I’m having problems the arts not showing up on the test network
Oh my god, Thank you SO MUCH for the Ultimate Guide! You're the Best Daniel!! God bless you man!
Only a pleasure
I had to leave another comment your a genius bro thank you a lot for your hard work and dedication to show others…..not a lot of folks like us who are willing to tech to the ones who want to learn!
Thanks for this video, it has been a long journey, gonna try it out now after I have watching everyting and taking notes. Thank you !
Followed this tutorial, start to finish, and never encountered any issues. That's pretty amazing. Great job!
how do you deploy the minting app on to the web?
Wondering, after deployment how do I get my entire collection to show up on somewhere like Opensea? Do I need to mint the entire collection on my own? I think this is the only step I'm confused with, getting the entire collection to be viewable in my Opensea "collection" space.
Thank you.
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
Hello! Your video is amazing. But I am struggling with a huge problem I didn't copied the Contract ByteCode and ABI while deploying now what should I do then to verify my Contract Please help!
what smart contract i have to use if i want to publish on solana
did you get this figured out? when i click on the copy contract bytecode button it doesnt copy anything
@@bigtymeplayerx you can go to the contract address and go to the contract creation txs Id click on that then you see raw input thats the bytecode
You are the one and only person who is helping free for NFT community and teach like pro
I did not miss even 1 second of your extraordinary tutorial. Thank you so much.
Hey Daniel! I want to take the time to thank you. You were good at explaining how to create an NFT from start to finish. Your clear and precise explanations allowed me to put my own collection of 10,000 NFTS online. Thank you!
I have a question. I didn't understand. Why don't show the price and the percents in properties by testnets on Opensea? When I mint by real maintnet will it work?
Did you make the mint all at once?
man, you nailed it really!!
I've been a software engineer for 2 years, which means I used to watch youtube tutorials for a long time, but this guide is insane!
keep it up !
These videos are the best! What a fantastic help. Straight to the point with great explanation. Great educator! Thank you for sharing.
Following, Subscribed and liked lol.. My head is swelling up from all the knowledge your supplying, Thank you again.
Wow! I hope i make money from selling NFT's soon enough to buy one of the nerdy coder clones before they run out! This will be super helpful.
🙏
You truly are the GOAT. Thank you for everything 😍
Thank you.
Thank you Thank you Thank you I was strtuglling while verifing the contract this video really helped me . I might buy one of the Nerdy Coder Clones just to show my support. Thank yo so much
Amazing video providing all the knowledge we needed for creating an NFT collection! Helped me a lot! Thanks!
timestamps
-------
0:00 - Intro
5:48 - Program Installations
8:56 - Join the community
10:48 - Artwork Layer Creation
16:01 - Art Engine
49:37 - Metadata Upload & IPFS
1:03:01 - Contract Deployment in remix
1:54:41 - Verify Contract
2:00:00 - Remix Tips & Tricks
2:06:28 - The Dapp
Wow wow wow
@@HashLipsAcademy I have a question how can we create of layer art
Maybe a good idea to improve the creation process would be to develop a photoshop script to export folders and layers with right names to keep the same structure so you don't have to reorganize them again if you already did it in photoshop. It's just a suggestion 👍
That sounds like an awesome idea.
Has he done this yet?
I really loved this tutorial, your way of explaining is super. You are great. It helped me a lot. :) Please keep posting this kind of tutrorials.
I've just successfully launched a collection thanks to you :) - Such a well laid out video, and easy to follow. You sir, are a genius :P
How much it costed?
Might I add, as a community I don’t believe we can thank you enough for all of your contributions and work, teaching and explaining, and trial and error you put in for us all. Much love 💪🏽📈
Thank you! Saved me time, I only wanted to watch one section for the time being.
Hi! It's amazing how streamlined this process is becoming. My first collection took forever, now I can create and deploy very fast so thank you! In one of your weekly updates could you explain how whitelisting works and/or how to do a presale?
That would be helpful
Hi Mate, I am new to this. Just wondering after you deploy the contract. Do you have to pay minting fee for each nft? Thanks
@@DaweiArt Typically you have the first buyer mint the nft to avoid paying gas prices
Has their been any update?
@@HunterWillard thanks mate! I was watch the video and using the fake eth it told me my wallet has no enough eth to mint all my nfts. That's when I got a bit unsure about.
One of the best Videos on the internet community. Hats off to you mate. You are the best.
This video is brilliant, great job on all the work you put in!
I have been trading for about 11 months now and just about every trade backfires and slaps me in my face. Nearly impossible for me to catch more than a few points . I try to do top down analysis but it doesn't work for me . I say to myself, clearly I'm in the 90% that lose money, so I open a demo account, do my analysis, then take the opposite of what I would normally take and get the same result. I'm starting to feel hopeless, any advice for a struggling trader
Your problem could be your stop loss is too close or you're watching your trades too much. Place it and walk away. Or you could just give up, trading isn't for everyone.
Don't listen to her, don't give up. Trading takes time, months, even years to master, even the pros learn everyday. Never the less, if you lose money no matter which side you take, maybe you need to look at how you are managing active trades rather than how you are entering them. My advice, find a mentor . And also, try incorporating the use of oscillators, Bollinger and pivot points into your strategy. And most importantly move to higher TFs(4h or 1D preferably), you'll thank me later
You're correct, I don't lose money every single trade, but my main problem is trying to let my runners run. Very rarely do I catch big moves . Instead they go a few pips in my direction, then go against me if when I try holding them. Also my entries could use a lot of improvement. A mentor would be amazing, but getting one is easier said than done. If it's not too much to ask, do you know any legit ones?
To be honest, I’ve loss greatly on trading too but I found out that the only solution at my situation personally was to get a professional trader who managed and controlled my trades. You can get one too. For months now I’ve been trading with CHRISTINE LYNN SAITTA and I can say I’ve made more than my loss now.
I think I have seen this name on a trading forum before, on discord one time, how may I contact her if that isn't too much to ask
The freaking best guy!! Love you man
🙌😁
@@HashLipsAcademy And yes you are the freaking best guy Daniel!! Thank you so much!!!!!!!!!!!!!!!!!
Dude. I have almost NO coding experience so this is a lot for me. but it’s absolutely perfectly done. Thanks for giving me a fighting chance!
Thank you Daniel!!! I appreciate ur videos! I am gonna watch them all!
You're gold! Thank you for always sharing so much value. I have learned so much about solidity as a whole from all the videos. Next step opening Hash Lips University 😁👄🏫💎🌐🚀
Not a bad idea 😉
Hi @fernando
I m having some trouble uploading. Can you please help me...?
amazing stuff. the only thing missing is how to use your own Domain name rather than pc host.
would be nice if you could do part 2 explaining how to use your own domain name
and also include what needs tp be changed to run the build from a SUBFOLDER
Thank you so very much for this absolutely amazing tutorial! Found it extremely useful and it demystified the process quite a lot!
this video worth every second!!! thank you!!!
there is 1 small little thing that maybe missing, it's how i can set the legendary hidden image each time i want on the regular hidden image , and how i may be sure that behind the legendary hidden pictures will be really a legendary original image.
1:01:34 - When making the hidden metadata file you want to MAKE SURE the last line of code has NO COMMA AT THE END. I spent 2 hours waiting for metadata to populate and replacing my URI links just to figure out that the issue was one comma at the end that essentially breaks the metadata if its there.
LIFE SAVER!!! WOW - I have been trying to figure out why my images have not been showing up, and I can't believe it was the comma!! DAYS BRO.... DAYS!!! Ok ...
-
Thank you for posting, I would not have figured it out with out your help! Big thanks.
@@stormfrontse4576 No problem! I was in the same boat man, almost screamed when I realized it was the comma, lol
@@stormfrontse4576 did you get as far as deploying on polygon? I was able to get that far but for some reason opensea wont let me edit any of the collection details that display on their website..like banner image and logo..and earnings
OMFG! Thank you. Such a little thing. So glad I scrolled down to see this comment.
@@nitePhyyre it was a mini hell for me to figure that out so I figured I'd share lol
Hey Daniel! I have officially made it to the end of this tutorial. Thank you so much for taking the time to do this. I feel like all of my questions have been answered by this video which I haven't found elsewhere. Quick question though, let's say I have a pre-existing wordpress website and only wanted to add the connect wallet/minting button with a "3/50 minted" bar, how would I do that? If you have time the next few weeks to show something like that I know a lot of noobs like me are in a similar boat when it comes to a minting dapp, just so there could be more flexibility as far as site building etc. Thank you again so much for your time, Jordan.
I will look at adding a plugin for WordPress but for now it's best to redirect the users to the minting Dapp on another server
@@HashLipsAcademy Myself and many others would definitely appreciate that! Until then I'll be on the lookout and will let you know if I find anything!
@jordan
I m having some trouble uploading nfts. Can you please help me...?
@@HashLipsAcademy hi :) I have a problem... When I'm using the node utils/update_info.js only the _metadata.js file gets the information updated, all the others .js from the nft's dont change their data. What can I do? Thanks !
You sure are a wonderful human being for educating people in such a clear way. Be blessed forever...♥️
Daniel you are so kind and generous TYSM!!!!!! I'm not a natural when it comes to coding and this was SO helpful.
This is amazing. You took your time to help thousands of others at no cost at all. I hope everyone who has some success because of it finds the time to contribute back to you.
I have 3 questions:
1. If the first part is creating the art from layers and the second one is the deploying the contract which basically gets everything on open sea what do we need the Dapp for ?
2. Do we have to mint anything during/before/after the contract deployment ?
3, How many times do you have to actually pay Gas (contract deployment and wallet initialization are the only 2 times i know of) , and how much for 1000 NFT's on ethereum ?
My questions may be stupid I know but still after doing a research for several months there are a few things here and there i dont understand.
How I understand it:
1. The dapp allows buyers to 'mint' their own NFT directly from the contract. They get a fresh NFT from the contract and don't have to buy it from someone else.
2. You can only mint after the contract has been deployed (and the 'pause' is set to false). You don't HAVE to mint them right away, because the dapp allows people to mint their own NFTs. If you mint them yourself, you need to pay the gas fee
3. I think you have to pay gas every single time you mint an NFT (but I could be wrong). On Ethereum, the price to mint a single NFT is at least $30 or more, usually around $50.
Gas for 1000 NFTs on Ethereum will be EXTREMELY expensive if you mint them yourself, you should NOT do that.
You dont need to mint your own nfts, your buyers will mint it for you and pay the gas fee. Just get the royalties
@@yasashigirlstv1378
Thanks, I continue to educate myself on the topic , some of the things you wrote i knew , some i didnt. Thank you !!! I see that during the deployment and the dapp testing he is minting some. So based on your writing and what i see is that the Dapp is a tool allowing for people to Buy my Nfts from my website.
What I wonder is this - I also see that Opensea only shows the minted ones. How do I make opensea show all my nfts ? Do I have to mint every single one ?
If so how this even works ? I set the price for minting lets say to 0,5 matic I mint them all, they show on Opensea and then there on by one I change the price ?
@@yasashigirlstv1378 Please help me with a question? I want to mint on the Polygon network 10,000 NFT. How do I mint to 10000 NFTs (matic network) at once? The remix returns me this message:
"Gas estimation failed
close
Gas estimation errored with the following message (see below). The transaction execution will likely fail. Do you want to force sending?
Internal JSON-RPC error. { "code": -32000, "message": "execution reverted" }"
@@rsouzadesigner I don't think pre-minting 10,000 all at once is a good idea since you will have to pay a huge gas fee. I think it would be a much better idea if you let buyers mint each NFT as they buy it
Hashlips THANK YOU for the wonderful video, however when i try to change the Minting Dapp it into my contract address i got an error message: "Error: Invalid number of parameters for "mint". Got 1 expected 2!" how to change the parameter in app.js, what should i do?
You are using the older contract so just update the App.js file like I did in the video
@@HashLipsAcademy I changed that for if (newMintAmount > 1) {
newMintAmount = 1;
}
and still got the same problem, how can I fix that? please help
@@juerfe second parameter that you have to pass has to be actual user address
Dude this is THE COMPLETE GUIDE, I loved it!
People like you should live forever and people like you could change the word in so many positive ways 👏🏼👏🏼👏🏼 congrats 🎉
you are literally guiding thousands of developers into the world of blockhain, thank you for this guide, may god bless you!
43:55 Random Background
41:31 Shuffle Layer
45:25 Extra Meta Data for Artist
54:18 Base URI node utils/update_info.js
1:00:38 Hidden Image
1:03:24 Deploy Contract
1:11:10 Change in Contract
1:24:43 Function of Contract
1:28:00 Minting on Other Address
1:36:59 Revel the Contract
1:43:24 Polygon Mainnet
1:55:31 Verify Contract
2:07:00 Dapp
hi akash, the current version of hashlips is 1.1.2 , if i use that to make changes to the metadata that is adding bulk upload to opensea and delayed reveal ? will it work smoothly with the new version? do you know
do you know the timestamp for bulkupload ?
Love it! Thank you for another amazing video :) I have learned so much from you. YOU DA BEST!
The utils are so handly and helpful. Thank you!
Man, I'm speechless. Thank you very much! It's incredible.
By the way, can I start to sell the entire collection on opensea without deploy the contract?
I’d like to know
It totally depends upon how big your collection is. If you have a collection of let's say 100 nfts, then yes, you can upload your nfts on opensea one by one, but if you have a large collection of nfts like a 1000, 10,000 or more, then you will have to deploy a smart contract to mint all your nfts at once.
Daniel, thank you so much for your Videos they are really outstanding and I can guarantee I will watch through all of them in the next couple of days!
What I would like to know is if it would be easier just to generate the images and then directly upload them as collection on opensea? Or do I miss something here? As far as I understand people can just have a look at the collection, see which ones available and buy the specific NFT and pay the gas? So for me this would be totally free?
I would love to know too!
Anyone knows how to do that?
This is brilliant content, thanks for putting so much time and effort into this !!
Awesome content. A lot of effort to prepare it for sure !!! Good job, nicely explained !!!! Thumbs up!
THE LEGEND HIMSELF HAS ARRIVED!!
🙌🔥👄
This is absolutely incredible content!
One question…what is the best way to reset the history of combinations that’s been generated?
They simply override the previous ones
@@HashLipsAcademy oh ok. So there’s no history between executions?
You are my hero !! Thanks man, honnestly such a complete tutorial and great toolkit, WOW
Thank you for this tutorial, I am not a programmer but after many trials and fails and retrying and so on... I have finished the project successfully. I have now The "BioMorphess" collection up and running, thanks all to you! You are a super guy!
35:42 to see the property percentage of the nfts
36:38 preview images
37:18 regenerate metadata file if its deleted
54:10 run metadata
56:37 hidden image
1:10:39 reveal/ not revealing minting
Thank you
@@HashLipsAcademy No thank YOU
@@HashLipsAcademy and can i upload ten thousand nft to opensea directly or does it have to be 1 to 1?
You are simply amazing
🙏🙌
enjoyed your presence so much on clubhouse today! So happy to have an SABC!
This is the most valuable video I've seen on NFTs by far
question regarding minting sequence via dapp, is there a way to randomize the unit # minted or will it always be in numerical order?
The videos above ^
Glad my videos help 🙏
One of the most helpful tutorials ever!!!thank you sooo much
I am so thankful for you! You’re doing great things with these videos
Daniel, Just wow. Excellent work. Also, [important please] How to set the contract to offer the first 100 or 500 nfts to mint for free and then the rest at a usual price? So users only have to pay gas fees for the first 100 or 500. Thanks man!
If you are not apart of our HashLips Family on Discord yet, feel free to join. We help out with problems and also have fun discussions: discord.gg/Fqs75kME9G
@@HashLipsAcademy I do appreciate the videos you post, and no offense, but I'm part of the discord server, but my questions are never answered... Can't seem to find the best way to solve the questions I have..
Dear HashLips, would it be possible for your to create a tutorial like this one but without the dapp section? Meaning, a tutorial that tells you how to publish your 10,000 images NFT collection to OpenSea at once, uploading your images and metadata files and without needing to hide the NFT until release date while your buyers mint before release. I would love to just publish my 10,000 NFT collection to OpenSea directly with their metadata, so I don't have to manually input all the traits for each one, etc. Doing so 1 by 1 would take weeks of work. And, on the Polygong network to avoid the ridiculous current high gas fees. Thank you so much matey!! Cheers to your success!!
Following this
I would love to know too!
me too I want to
+
Thank you very very much! Clearly explained, complete! Very professional! Congrats
very good man. yes its long but it was a good trip. i will start my collection soon. THANK YOU!
Amazing work. I'm highly impressed and thankful for your work. When I run npm install it says found 3 vulnerabilities and does not generate anything. I'm stuck and any help would be amazing! Thanks in advance boss. Keep up the amazing work
yeah same problem here, Have you found a solution yet if so I would love to know thanks.
@@marcfab8901 im having same problem please help it lets me generate the eyes but when i use my files it doesnt work
npm update should fix it
npm install only installs node, if you want to generate the images you have to run "npm run generate" or "node index.js" in order to star generating your images. hope it works.
Hello! Thank you for taking the time and effort for creating such a valuable video. How can I upload all my NFTs to OpenSea in a single batch without having to mint each one? I was under the impression that once a contract has been created and verified, that we can process a batch upload through OpenSea. If that is not the case, what can I do?
did you get any answer? if you did, can you share how did you manage to do it?
This is by far the best step by step ive seen and your tools are just awesome. Thank you for taking the time to do this.
I have 1 question if you dont mind. If i produce a collection of say 1000, can I then produce another 1000 later without the run wiping the previous batch out. Can I add to a previous run?
Thanks
following the video. thank you so much for the time and the great work you are sharing!!! greetings from Italy!