Great video man! And I can’t tell you how great you did on the explanation of how that two speed works that’s nice! Amazing great wrenching as well man!
@@Meyers2strokeRcgarage I’m gonna build a 5t platform with the 40gt engine! This box is the 40gt with carb and clutch and all the bits and bobs for that. I wanted to have the heart in hand first, now I’m gonna get a roller. Might just build off of the Taylor chassis and go full tilt
Great wrench video Ben! I like the explanation on the two speed it is on point! Jersey Jason helped me out with mine at a race and he used a bolt similar to the one you used?
Any recommendations for a good reliable 2spd for the losi 5t platform? Just picked up a 30deg north truck and am trying to find companies that make a quality one
@@OggaDugga Yeah, I think it might work with risers. You won’t be able to use the middle section of the original 5B roll bar. The problem area is going to be the two pieces that slant back to the rear bumper gonna be tough to get it to clear the exhaust. My 40 GT was in my Baja with the FT Rovan cage, then, when I got the 71 supreme, I got that sand rail cage made out of metal.
I always use blue loctite and I always use it on my engine mount bolts, the 4 bolts that hold the 2 frames together, both rear bulkheads, the transmission, the gears, gear plate, and top plate. Basically all the rear fasteners 👍🏼
That plate is so nice everything Mike and his team make are out standing
That’s exactly right bro nothing beats Taylor RC quality 👍🏼💪🏼
Great video mate 👍 looking forward in seeing the 2 speed baby 🤟
Thanks bro 💪🏼 heading to the fairgrounds to open it up
Great video man! And I can’t tell you how great you did on the explanation of how that two speed works that’s nice! Amazing great wrenching as well man!
Thanks bro💪🏼
Great vid! Perfect info on how to set it all up! Thank you!
I got a big box sitting here from the Master Mike T! ……. :))))
Thanks brother 💪🏼 nice what you cooking?
@@Meyers2strokeRcgarage I’m gonna build a 5t platform with the 40gt engine! This box is the 40gt with carb and clutch and all the bits and bobs for that. I wanted to have the heart in hand first, now I’m gonna get a roller. Might just build off of the Taylor chassis and go full tilt
Great wrench video Ben! I like the explanation on the two speed it is on point! Jersey Jason helped me out with mine at a race and he used a bolt similar to the one you used?
Thanks Kyle I appreciate it my bro👍🏼
Great wrenching vid should work great 👊👍
Thanks man 💪🏼
Any recommendations for a good reliable 2spd for the losi 5t platform? Just picked up a 30deg north truck and am trying to find companies that make a quality one
I haven’t looked into one for a 5t but I know there are some offered by FLMLF.
Does the 40GT clear the stock Baja cage with risers? I’m curious because I can’t tell if that engine is the 40 or 35 😅
Risers would probably work👍🏼
@@Meyers2strokeRcgarage yeah, I just don’t wanna spend $1400 and it doesn’t end up working lol
@@OggaDugga there are all kinds of cages that work with the 40 GT 👍🏼
@@Meyers2strokeRcgarage true but I like the original Baja 5B look hence my dilemma 😅
@@OggaDugga Yeah, I think it might work with risers. You won’t be able to use the middle section of the original 5B roll bar. The problem area is going to be the two pieces that slant back to the rear bumper gonna be tough to get it to clear the exhaust.
My 40 GT was in my Baja with the FT Rovan cage, then, when I got the 71 supreme, I got that sand rail cage made out of metal.
Im no where near your knowledge but is it me or the spacing between gears seem a bit far from each other at 9:26
The contact pattern and mesh are great bro 😎 that’s what I look at👍🏼
Big sale on Taylor now
Oh yeah bro I got an email about six or seven this morning 💪🏼
So I got my 40gt in! What areas do you recommend loctite in? And when I say that which areas, red loctite, or blue loctite?
I always use blue loctite and I always use it on my engine mount bolts, the 4 bolts that hold the 2 frames together, both rear bulkheads, the transmission, the gears, gear plate, and top plate. Basically all the rear fasteners 👍🏼