Is This The Fastest 3D Printed Brushless Motor / Drone Motor
ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2021
- Hi... In this video you will find how I make a 3D Printed Brushless Motor. The Brushless Motor that I make in this video is the same design as ones used on FPV Drones. This Motor has a vert high rpm. Please note these motors are just for experimenting and demonstration purpose only.
If you enjoy my content and would like to support me by donating, here's a link to my buy me a coffee page any donations will be much appreciated... www.buymeacoffee.com/CoolStuf...
These are affiliated links. It helps the channel if you buy the parts using the links below...
Thank you..
Soldering Iron I use - www.banggood.com/custlink/KKm...
3D Printer I use Ender-3 Pro - www.banggood.com/custlink/33K...
Here are some more videos you may be intrested in watching...
DIY Brushless Motor With Out The Need For A ESC
• DIY Brushless Motor Wi...
Brushless Motor Winding Comparison Delta Wind VS Y Wind / 3D Printed Brushless Motor
• 3D Printed Brushless M...
3D Printed Brushless Motor
• 3D Printed Brushless M...
Hi... Love to know what you guys think... Is it Cool 👍 or Not Cool 👎.
Also leave me a comment if you have any ideas or suggestions... Thanks
its very cool !
how do i get the 3d model
i cant find it anywhere
Stl??
Pls. Laked .stl file :D
Needs a capacitor in the starting switch.
Great Video! Is there any way for me to get my hands on the STL-fIle for the 3D Printed parts?
Love the 3d printed motors. Lovely done thank you for the video
Thank you
@@CoolStuff1 Hello, does this motor have heating problems with the plastic when it works?
very well made video and motors, perfect brushless outrunner! Could you do inrunner motor next?
Ehi, very good video. I loved the realization👍. Could you give us the 3d models to replicate it at home? Thank you very much.
That's should be nice on my 3D printed drone!
Thanks for making another motor video
You're welcome mate and thank you for watching and commenting
Great Video! How many inches is the magnet??
if you made 12 coils vs 16 magnets,would it be better picking up the speed?
This is my new favorite video
What bear and magnet you used for?
Try it with a resin printer. Just got one and the quality and precision is amazing.
Yeah quality and precsion dose look geat with resin printers. I have been considering getting one...
Hi boss. Great video. Do you have any stl please ? Thanks
The not gaining speed issue could be a balance issue, maybe if it's not stable it's preventing it from picking up speed
What would happen if you hooked it up to a powerful battery meant for drones?
Cool
Thank you mate
Why did you wind it like that? Can you explain why you didn't wind it in a delta?
Its cool but make sustained RPM and after that on second run blow it up to see how far can go. You can print another one if need it.
That's really cool stuff ;-)
Thank you
yp
Can you share the step file or technical drawing of the parts?
Could you release the stl files for these please?
Please make a drone with these motor🥺
Hey man, this looks great and I’d love to make one myself. Where can I find the stl?
Im trying to make a replica of the model if you need it just tell me
@@zerenzi hey, how did you go? Im thinking of making some of these 😁
@@frissonsknives Im still working on it. I will notify you when its done!
@@zerenzi i will be making a 2306 soon, would it be fine to message you if I have any questions? I promise I won't spam
@@frissonsknives sure but im not an expert
If you can reach 100,000 rpm then yes, you are faster than any brushless motor created.
looks like need right advance set up in esc settings
Can you make a drone using these motor
The not gaining speed issue could be a balance issue.
do you make the files available anywhere? I would like to construct this as a project for my students
What are you using to with the nob to speed it up?
To control the motors speed I'm using a Servo Tester
@@CoolStuff1 Thank you SO much, i want to try what you're doing lol but i have no clue what I'm doing or where to start 😟
@@CoolStuff1 Is this good? lol it doesn't it looks like yours but doesn't look like it does what yours do haha 😅 also i'm rude
i really liked your video, and your little motors once i figure this out i plan on trying to head to your link and trying what you did here
I have to ask, what good is it if it always needs a little finger boost. How would that work on an RC plane? Not being sarcastic just generally curious
Yes unfortunately it needs bit of foreplay like a woman... 😅
When it has speed it can speed up
How much this magnets
Please make a video with this 3d printed motor vs real brushless moto or make a rc plane or rc boat with 3d printed motor
Hi, What is the filament material you are using? Thank you in advance.
PLA
@@CoolStuff1 Very impressive.
@@robodev6033 Thanks
@@CoolStuff1 You are welcome!. you did good I'm looking forward to designing my own base on your design and make the high torque version do you have any suggestions?
the 3d printed motors are really cool but seems like the bell is not balanced. if you can achieve the balanced bell, then you'll get a higher RPM without helping it out
Please, give me the link of the device with which you let operate the motor
Sure mate... ESC - uk.banggood.com/custlink/3GGyARzBPO
Servo Tester - uk.banggood.com/custlink/DvDhsRM4tg
The problem of the little push needed at the begining should be solved adding some weight to the rotor. This would work as a flywheel and give that inercia needed.
Maybe modified the design for outer rotor bigger and use thicker magnet
That thick rotor and magnet add weight. Maybe that work
trash motor
pleax teste this on 3d print drone!
The lack of field focusing causes this motor to have very weak torque which is why it has so high rpm.
It would be very difficult to make it drive a practical size propeller.
It would be good for a small drone
My goodnes that was fst!
Если б пез пенделя было бы ещё лутьше, автор ты Молодец.
Как я понял, это из-за того что датчиков холла нет и контроллер не понимает когда переключать обмотки и просто создаёт вращающееся магнитное поле
Drone banega vai??❤❤
Make a diy drone using this motor
will you pl. send stl files
Можно Ваши гематомы взять
Nice work can you please share the STL file .
Your so amazing wow
Thank You 😊
Hook these up to real batteries and so they spin faster
48 minutes ago
Is thi delta connection 🥺
No it's wye (y) connection
5:25 why need help?
3d printed
I'll subscribe you
Thank you
LOL im the First
Yes you are and thank you for watching.
Мне намда 4 мотора серый чёрный жёлтый и синий можн
give me neodymium magnets give you 80.000 rpm < 100.000 rpm
Your printer need to fix. Parts is bad
How so
@@CoolStuff1 Some people are just haters. They need to fix their grammar! You gotta consider the education level of people like this. 🤣
Reduce no. Of turns to 9 and increase wire guage... For higher speed.! Calculate before you make a video...! 🤦🏻I'm sure ur not an engineer.!
Calm down.
And what would the calculations be ?