Kobalt stainless steel workbench
ฝัง
- เผยแพร่เมื่อ 28 ม.ค. 2015
- Easy to assemble stainless steel work bench from kobalt.
I am an amazon affiliate , Shopping through my link doesn't cost you a thing, but I get a small fee when you do. Thanks! amzn.to/2VKQjIV
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
You crack me up with those instructions...you know us men don't use instructions (when people are looking lol)
Great lookin work bench
Or ask for directions.
That is a really nice work bench.I paused the video,and just stared at it for a minute or two.You really got me with those instructions,I got a really good laugh out of that.That was too good.
I'm afraid we haven't seen the last of those instructions.
I bought the black one on sale for $149, what a great bench! I replaced the tabletop with 3/4 plywood, screwed it down and put a vice on it. I also took the particle board tabletop that came with the bench and cut it so it so it fits over the bottom shelf. I just bought a Kobalt 3 gallon air compressor and it sits on the shelf. I love my Kobalt workbench!
I've had mine for several months now and it's held up well. Hard to believe it's made in China. They don't usually make things that go together this easy and last very long.
I think Breezy is the culprit. Thank you for the video! Now, I’m my way to Lowe’s to buy me up a shiny new workbench.
I built a very similar Kobalt bench this afternoon, and I actually used the instructions, mostly just for order of operations. In some ways they were less than helpful. Enjoy the bench.
those darn disturctions. nice bench.
Thanks!
nice bench
You sure know how to make a video funny
Thanks for the laugh :-)
Have a Jesus filled day
Greg in Michigan
Nice work bench, and haunted instructions. It's too pretty to use but once it's peppered with grinding grit it'll be all better..
When I was a kid, my grandma had all the furniture covered in plastic covers. I'm afraid I might have to go that route with this bench.
Way to go, that's a great deal!
Yeah I was excited to get it. It was the only one they had.
I think you have a retriever there. I would blame Breezy.
Nice bench, wish I had all those bucks to get one. Thanks for sharing.
The only reason I had all those bucks was from selling a lawnmower.
Lol that was a funny one. Nice bench
Thanks!
I have the same workbench. My instructions weren't possessed like yours thankfully. lol Pops Quest for a Simple Life sent me over. I just subbed.
Why, that little prankster, Breezy! What are you gonna do? *rolls eyes*
He is fast!!!
Great timing, been looking for a reloading bench but can't seem to make up my mind. Know you are into fire arms but not sure you reload, do you thing it would make a good reloading bench. Also the top you lifted up, it there a shelf in there if so it would make a good place to keep a rifle and not be shouting "look at me I have a rifle in here" type of storage.
Good looking bench.
The top would definitely have room for a rifle. This would make a fantastic loading bench.
Saw Breezy smiling (culprit) Looks good.
I kept watching him out of the corner of my eye but he didn't move off the chair cushion.
BCtruck, rebuild, repair,repurpose Breezy might be one of those dogs trained to move things with his mind! I'd keep an eye on him to see if more things "mysteriously" move when he's in the same room! ...just sayin'....
We had about 5 Snickers with almonds go missing the other day, wife looked at me and I pointed to the dogs, she did not buy it.
For the average homeowner who needs a bench in the garage for occasional use these are fine out of the box. For heavier use it's a kit. Fortunately you can beef up the structure. First thing is to use nuts and washers on the M6 screws plus loctite. Second the bottom shelf is a joke. I overlaid it with 3/4 MDF. Then I built box section out of 1 x 10 ripped to fit two stiffen the structure up. Plus I consider the drawers to be too light weight in their construction to be used for anything heavy. The only thing holding them together is M4 screws. I'm currently building drawers to fit inside the stainless shell. I putting my drill press on it and if I'm happy I may get another one to mount a benchtop mill on
Fir occasional use??? This has been in my heavily used metal working, knife making, small engine shop for a couple of years now and it’s stood up to the abuse of daily shop use. There is no MDF on this. In fact, I bought a second for the shop just6 months ago because the first was so well built.
that annoyng wind ....
looking great that bench ;)
It was some odd wind blowing around in my shop.
@@bctruck The Holy Spirit 🕊 🔥
@@MistaSCARY no, a fan. The Holy Spirit is in me.
@@bctruck 🌬Amen
it was the dog I love that bench now im going to have to get one
The one I went there to get was not near as nice as this. I kind of lucked out today.
what I really like is the light and extra plugs on it I gues this summer im gonna have to build a shed to put my yard stuff in and my big tools for cars in it
LoL those darn instructions. nice bench hate to get the first scratch so just go ahead and do it now lol.
Oh man!!! I didn't even think about getting scratches on it! Now I won't sleep a wink tonight!!!
It looks more like a Bar B Q than a workbench
LOL! It would actually make a nice one too!
I finally pulled the trigger and ordered this bench for my airbrush studio,but I paid a little extra to get the lime green one,I should have got one of these a long time ago but instead got a $100 Harbor Freight Work Bench which isn't worth the hassle it took putting it together. But I plan to have both benches flush with each other and this one will hold my tools and airbrush compressors and the HF bench will be the paint bench 😂
I looked the harbor freight bench. I’m glad I passed. I bought three more of these and all my knife making tools are bolted down to it.
@@bctruck Be glad you passed up on it, it should be in a toy aisle. I should have this to begin with, although I'm not looking forward to putting it all together lol
Jonny Crash it will go faster than you’d expect. Once you get three or four pieces together, it all goes together quicker and makes sense.
You might have a spook BC, lol...very nice! Hope all is well and God Bless! :)
I'm afraid those instructions are going to be showing up again,somewhere,sometime.
Maybe if you put them in a filing cabinet they will stay, lol!
You got space under the top drawer to mount a vise and nut the bolts?
Yes.
great bench. the customer service at lowes here in blizzard land is awful.
Here it's Home Depot with the lousy customer service. I actually wrote them a nasty gram the other day. All they had open was self checkouts and I told them I left all my purchases in the buggy and walked out. I will never use self checkout.
Uh Oh. Breazy is at it again with those destructions! LOL
I have a feeling he has them hidden somewhere and I'll see them again.
Funny and helpful vid! Did you ever end up putting them casters on? Wanting to myself but don't know where to start.
No, in fact i moved to Texas and I have 3 more of these benches to hold all my knife making machines.
Something strange is going on with Lowes. They are really bending over backwards to deal lately. I bought a 300 piece Kobalt socket and wrench set for $105 and also a $1400 side by side refrigerator for $750 that was marked clearance $838. Money troubles maybe?
Ahaha, quite a comedian you are ;) I was hoping you'd say at some point : "One of these days... BANG, ZOOM! Straight to the moon!"
Only an old fart would know what that line references. I recognized it immediately! Pow,straight to the moon Alice!!
BCtruck, rebuild, repair,repurpose I don't know if we have to be old farts to recognize the line (I am one myself by the way). There is probably still reruns of The Honeymooners somewhere from time to time.
Oh! nice workbench by the way.
i could watch this shit all day man love your attitude brother great video, i was looking this hard wood one an then the cheeper mdf one would this be strong enough to put vice on to do alittle gunsmithing ?? im looking to ket something like this and a soled wood bench next to it
Absolutely! I have this at least a couple years now and I’ve had my bandsaw and a huge sander mounted to it. I liked it so much that I have 5 all together. I’m a custom knife maker and I needed something sturdy with storage.
@@bctruck
thinks brother you just made my mind up think you for the video an ill diff be picking one up today or tomorrow if there in stock
LMAO at that darn book! The bench is beautiful though.
That book was everywhere!!! I'm afraid to go to bed. If I pull those covers back and see that book,I'm moving.
That "Breezy" knows how to live life I think he should make some videos.
His videos would all be about chicken treats and naps. Some naps would be in the sun and some would be in my lap,which is funny because right now he is napping in my lap.
No better friend than a well fed dog.
Once again another entertaining and instructional video😄 I was afraid to buy one 😱 just for the reason of all the dang parts.
Anyway I have a question😳 do you think that bench will hold up to having a reloading press mounted to it😁 and hold up to the constant beat of the press?
Thanks bud😉
The top is bamboo,one of the have fest woods available,however,it is only about 9/16 thick. If it were me,I would cut a piece of 5/8 plywood and double this up with the bamboo on top. It's an incredibly well built bench but the top is only supported around the 4 sides,not in the middle. If it were supported in the middle I would say yes it's plenty strong to stand up to reloading.
Actually that was my figuring if I was to come across a good bench with a weak top. Can I support the middle if I have to, I mean is there room? Thanks again, Dean
Good deal! Now the black powder coated one is $250 and the stainless is more
Since this video,I’ve bought 3 more for my new knife shop.
Thinking about getting this…can casters be added to legs?
I don’t see why you couldn’t add caster but it would raise the bench surface higher.
@@bctruck Great 👍🏻
Blame the dog I do I never works great bench looking good
The dog gets blamed for a lot around here,especially concerning strange odors.
If you did a real time video putting that together your would have lost a lot of subscribers! (ha ha) Gezz, what a job. But I know it was a labor of love. I do like that electrical outlet, the upper storage area and the drawers are indispensable. And don't worry, no one saw those instructions.
Instructions? I've no idea to what you are referring!
put that hook through the shredder it wont bother you again
That's the thing,,,,,,, I DID!!!! It's Alive!!! Alive!!!
Hi I’m looking into buying this work bench for my husband. Do you still recommend it or do you suggest something else? Thank you
It’s still the best one I’ve bought.
@@bctruck wonderful! Thank you 😊
Probably the instructions had something about not blocking the window with the work bench, heheh
I just picked up a used black one for $Free.
Free is my favorite price!
you keep changing direction, don't need no stink in direction.
I hope you weren't wearing flip flops and drinking with a straw sir
I just bought mine for $379
Man do you need a lid for that trash can....
Or lead weights! LOL!!
Ha and lowe's wants 349$ bucks as of today for that work bench. $199.00 sounds like a time for me patient and wait until the price drops
dang! Talk about inflation!!!
Oooooh, shiny! (Us bear-types are very distracted by shiny stainless steel, just ask my ex-wives, LOL) Excellent bench, excellent dealing for an excellent price. Are ya gonna put leather protective scuff-rests on it, are ya, are ya, huh, huh? Nicely done.
Scuff pads??? Next thing you'll be sending me tool cozies!!!
BCtruck, rebuild, repair,repurpose Tool cozies? What a brilliant idea!!! I could prolly slap a few together out of sumpin butch like denim, but I bet your wife could do a better job knitting/crocheting them. If she decides to, lemme know cuz I want a half dozen or so, k?
LOL..I got one like that but not as fancy. Sorry but a gillion different screws sizes..need those pesky instructions. If nothing else saves taking it apart a few times!
I only had to take one part off because I mounted it upside down. And screws,,,,, they gave me exactly enough and not one extra screw.
Same with me...not one left. Unlike some of my early days multi-barrel carburetor rebuilds...always a few parts left! :-)
Send me those "Instructions" They will be dealt with....
That might make for some interesting videos!!
Next time burn the instructions if it's not too "windy." :)
I'll use the shredder next time.
lol..very nice looking bench...
Now everything else in my shop is jealous!
Structions?? don't need no stinking Structions!!
I have a trowel if you decide you want to bury those instructions.....
Im afraid this calls for nothing less than a dewalt,drop forged,zircon encrusted,diamond edged trowel.
BCtruck, rebuild, repair,repurpose Mine is simple consumer grade, Chinese made, rust covered sheet metal. Sorry I really wanted to help.
LoL!, Instructions are someone else's idea on putting something together...
Reading instructions is on the same level as asking for directions.
Those direction thingers are for women, good you got a wife. They can't throw footballs well or run as fast as guys, but they can deal with directions and other great talents. Womens won't ever replace men like the progs are trying to say they should, but they are a great compliment to dudes and fill in great where we are weak, coming with their own superior set of skills. Give the instructions to the wife!