5 Controlers... Main 1 center dash and 1 each door. Each connects to door power (+)(-) easy. Main controler will tell others when to powerand activate. Easy. I have added full 3 kits to my Tiguan total of 18SymponyLeds... 8month now, only 1 strip kinda fail because of exsesive heat in Florida. Easy to replace
Can the symphony led strips bend up and down? My ford maverick has bends that go towards the dash itself and I don’t know if the strip can bend that way I know it beds to the sides very well but my question is with it going the other direction
hey do the sub controller need to connect with the main controller? or its a separate thing ? i can just connect the sub controller with the window regulator right? and it will sync with the main thru Bluetooth?
Yes. You have full control with the app or you can connect your power source to your parking light or headlight fuse which will only turn on when you use them.
Hey. How do the 4 slave controllers communicate with the main control? Like if I want to connect the 4 slave controllers in my 4 doors. Would I have to connect the main controller to all my other 4 sub controllers with wires or are do they communicate wirelessly?
Do I power each slave controller like you powered the master controller? Then plug each slave into the master ? I’m ready to send this kit back for lack of instructions. Frustrated
Each slave controller must be connected separately. Once you have them connected, they will communicate with the main controller wirelessly so no connections between the slaves and main controller is needed.
Is possible to make footwell lights working in different colour/sequent then the strip through app? For example fotwell light stayed solid blue and led strip - rainbow ?
hello, I bought the same lights, but I was wondering if there is a way to change the start up animation instead of it always being the rgb chasing feature? thanks in advance
Hey i installed the same leds in my car mercedes w204 i gave doors the connection from window regulator and the main controller is connected with the ciggerate lighter but i can't change the colors it's not showing the animation it is connecting with the app but only turning on and off what could be the possible reason? ):
Hello, what a cool video. Definitely considering buying this for my car. Do you think it is possible to add the the light strips into the doors without connecting it to the controller directly? Kind regards.
Hi there! For the app, is there a way to save a few of my favorite light patterns under a 'favorite list' and for the app to rotate/shuffle my chosen patterns on its own?
Aloha Greg! do these lights let you set a different color for each independent control box or light strip? Or do you know if there are any ambient lighting systems that allow us to do this? Mahalo!
Hey Great video tho, thanks for your explanation. However I just wonder the sub-controller, do they just connect to the power and the led strips at the door, and it can run without a physical wired connection to the main controller? (Assuming the sub controllers are wirelessly synchronised with the main controller) Appreciate if you could help me out in my confusion 😅
@@AutoSensation wow then, it actually make the installation much more easier than the fiber optic ambient lights. Thanks for your explanation mate hope you have a great day ahead. Subscribed from Malaysia🇲🇾
Hello, I am planning to buy these but want to connect extra lights for my dashboard. I noticed the main controller uses one port for one dashboard strip, second port for the second dashboard strip, the third port for footwell lights and the fourth port is free. If I bought an additional light strip, could I connect it to the fourth port on the main controller and get synchronised lighting? I would like to install 3 dashboard light strips, not just two.
If I select lets say purple color, does it stay purple everytime I turn the car back on? Or it needs to be connected to mobile app everytime then selected again
@@AutoSensation thank you that makes sense as I installed it to the door windows and no lights came on as the power controller was not connected yet so in order to work the main controller has to work the all the lights work is thst correct sorry for asking
Hello, awesome job and looks nice! One question, how is everything working after some time? Any issues with the controler box? Led strip? Thanks in advance!
I installed the same one in my car after a few days the door lights stopped working except the driver door and the dashboard main controller,what do you think I should do
Probably shorted somewhere. I would disconnect all the doors first then test the main controller. Then carefully put things back door by door and make sure wires are not exposed or touching.
@@AutoSensation I open one door and checked the controller and then realised that I had the window function locked on the driver door and that’s why the controllers weren’t getting power ,silly mistake but I managed to fix it
definitely looking forward to getting some of these. Do you know if you could connect these to a blue ghozt controller and make your own chasing effect?
I actually was looking for a video that shows how the lights do in bright areas. In my opinion, if you can see them during the day, that means they’ll be extremely bright at night. But it would’ve been nice to see both though.
Hello, I managed to install the led strips on my dash using the main controller. I want to install the rest on the doors. Do the slave controllers automatically sync with the main one? Where could I draw power for the slave controllers inside the door panel?
Yes the slave controllers will sync automatically. If your vehicle has ambient door lights already you can tap into that. If not, you may need to run the wires to your fuse panel .
👉Dreamcolor Acrylic Interior Car Lights
Amazon: amzn.to/3zwOsN1
5 Controlers... Main 1 center dash and 1 each door.
Each connects to door power (+)(-) easy. Main controler will tell others when to powerand activate. Easy.
I have added full 3 kits to my Tiguan total of 18SymponyLeds...
8month now, only 1 strip kinda fail because of exsesive heat in Florida. Easy to replace
Nice
Can you do a video of a full install including door panels and how everything syncs up? Thanks
Each door gets a box. That box uses very small power from locks or window. Very easy. Each box connect to each other via bluetooth.
I liked more the sound mode ❤
I have the same set its amazing but, the rainbow start up animation is very annoying.
Did anyone find a way to get rid of it?
Can the symphony led strips bend up and down? My ford maverick has bends that go towards the dash itself and I don’t know if the strip can bend that way
I know it beds to the sides very well but my question is with it going the other direction
No I don't think it's possible
hey do the sub controller need to connect with the main controller? or its a separate thing ? i can just connect the sub controller with the window regulator right? and it will sync with the main thru Bluetooth?
The sub controller connects to the nail controller wirelessly.
Hey, Where did you get the usb cable for the power supply?
amzn.to/3ULMLpp
Is there a way to have them off so they’re not on all the time
Yes. You have full control with the app or you can connect your power source to your parking light or headlight fuse which will only turn on when you use them.
I wonder if these can be reprogrammed to make your own light sequences or be able to make the light stackable when powering on.
I have been looking for (MagicLanteenApp) info in how to reprogram or add some of my own light effects. But no info yet.
Hey. How do the 4 slave controllers communicate with the main control? Like if I want to connect the 4 slave controllers in my 4 doors. Would I have to connect the main controller to all my other 4 sub controllers with wires or are do they communicate wirelessly?
They communicate wirelessly
@@AutoSensation Thanks. I'm going to try them out and see how much I struggle installing them. Thanks for the reply. I'll be using your affiliate link
@@babyjeff10 Thank you for your support.
Do I power each slave controller like you powered the master controller? Then plug each slave into the master ?
I’m ready to send this kit back for lack of instructions. Frustrated
Each slave controller must be connected separately. Once you have them connected, they will communicate with the main controller wirelessly so no connections between the slaves and main controller is needed.
Is possible to make footwell lights working in different colour/sequent then the strip through app? For example fotwell light stayed solid blue and led strip - rainbow ?
I don't think this app has that feature
No
Does this system light do the chase feature and can it segment the light also
hello, I bought the same lights, but I was wondering if there is a way to change the start up animation instead of it always being the rgb chasing feature? thanks in advance
No. I don't think so.
can you give me the name of the usb thing u used to plug in the power supply connecters?
Are talking about this? amzn.to/4cA8FT7
@@AutoSensation yes and how did u wire the 12 wire to that? did u solder so something ?
@@shadmanzzd It's best to solder but I didn't. Just used electrical tape.
Hey i installed the same leds in my car mercedes w204 i gave doors the connection from window regulator and the main controller is connected with the ciggerate lighter but i can't change the colors it's not showing the animation it is connecting with the app but only turning on and off what could be the possible reason? ):
I'm not too sure.
@@AutoSensation is it possible that it could be a connection problem?
@@qasim8359 are you ae to connect to the app?
Hello, I'd like to know if u can cut them , will they work to the very same cut length or will some leds die
Yes you can cut them. I believe you can cut them without the leds dying.
Hello, what a cool video. Definitely considering buying this for my car.
Do you think it is possible to add the the light strips into the doors without connecting it to the controller directly?
Kind regards.
Yes. This kit comes with sub controllers for that purpose.
Can I select my own two or three colours for the strip's to flow. Like I want to have pink and purple blending together?
You can't select your own color combination however there are lots of color combinations that may come close to what your looking for.
Plz can u explain how soliding this strip
Sorry. I don't quite understand the question.
Are they brighter in the night ?
Yes they are
This are led strip Ambilight , acrylic is one led thats pushes through the strip
No that's electroluminescent or EL Wire, the ones with led is acrylic and symphony
Mine came with a touch button or something. Do i need it, will it work without connecting to the circle touch pad?
That's a touch controller. I just tucked mine away. I don't use it.
How did you connect them to a USB? Did you cut the usb and connected the wires?
12v Cigarette plug for now. I might hardwire in the future
@@AutoSensation I am very new to this, but how did you wire the light to USB?
@@joegu2958 facts
Good video, could you tell me how to find the device in the app because I press the button and it tells me that it can't find the device thankyou
Make sure your Bluetooth is on. Hit the menu on the top left. Tap on my devices and look for a device that is unlinked. Click on it to link.
Great video! does the controller remember the last light sequence when you turn the car off and then back on??
Yes it does!
@@AutoSensation Thank you my friend!
hi, mine will always start with the running rgb followed by my choosen colour. how do you set so it will on with my choosen colour?
How much u charged to install?
Sorry. I just DIY personal vehicles. Not a shop
Hi there! For the app, is there a way to save a few of my favorite light patterns under a 'favorite list' and for the app to rotate/shuffle my chosen patterns on its own?
no. unfortunatley I don't think it has that feature
Aloha Greg! do these lights let you set a different color for each independent control box or light strip? Or do you know if there are any ambient lighting systems that allow us to do this? Mahalo!
No. I think the sub controllers all copy the master controller
Have you found a way to edit the boot animation?
Unfortunately no I have not
Hey Great video tho, thanks for your explanation. However I just wonder the sub-controller, do they just connect to the power and the led strips at the door, and it can run without a physical wired connection to the main controller? (Assuming the sub controllers are wirelessly synchronised with the main controller) Appreciate if you could help me out in my confusion 😅
Yes. The subcontrollers are sync wirelessly. All it needs is power supply
@@AutoSensation wow then, it actually make the installation much more easier than the fiber optic ambient lights. Thanks for your explanation mate hope you have a great day ahead. Subscribed from Malaysia🇲🇾
@@David-gu2zb Thank you for your support
@@AutoSensation well deserved, helpful contents there, keep up the good work!
Hello, I am planning to buy these but want to connect extra lights for my dashboard. I noticed the main controller uses one port for one dashboard strip, second port for the second dashboard strip, the third port for footwell lights and the fourth port is free. If I bought an additional light strip, could I connect it to the fourth port on the main controller and get synchronised lighting? I would like to install 3 dashboard light strips, not just two.
Yes. It would sync with the rest.
If I select lets say purple color, does it stay purple everytime I turn the car back on?
Or it needs to be connected to mobile app everytime then selected again
Yes. It does have a memory function.
@@AutoSensation awsome, thank you on fast response 👍🏻👍🏻
hi, can i connect it to my android player?
You can download the app.
Nice installation 👍👍
Thanks
What exactly did you use to connect the power wires to the USB charger?
amzn.to/3KIaTVg
Just connect the two wires to the usb wires?
Is it safe to connect usb
Why didn't they make a connection with usb or cigarette lighter
Hallo what is name from app
Magic Lantern
@@AutoSensation with normal lotus lantern working with magic not wotking BT NOT FOUND
do you have instagram
Please make comparison between el wire and ambient light?
How are you connected back door and the main module?
where's the link to the product?
amzn.to/3zwOsN1
Hello I have the same kit does the main controller need to be connected to power the rest of the lights ?
The main controller does need to be connected to power.
@@AutoSensation thank you that makes sense as I installed it to the door windows and no lights came on as the power controller was not connected yet so in order to work the main controller has to work the all the lights work is thst correct sorry for asking
@@mohammedrahim5321 glad it worked out
Is the light wire same as el wire??
No. They are different
Hello, awesome job and looks nice!
One question, how is everything working after some time? Any issues with the controler box? Led strip?
Thanks in advance!
So far everything is still running strong. No issues.
Hi can you post the Amazon link again? I can’t find it! Thx
Sure. amzn.to/3zwOsN1
@@AutoSensation Thanks but I can only find the normal Ambiente with transparent cable. Not what's shown in your Video. :(
@@iPhone4ever sorry I don't quite follow. What do you mean by transparent strips? Are you looking for the Acrylic strips or fiber optic strips?
@@AutoSensation Hi iam looking for the strips you have shown in the Video. With the rainbow Effekt
Any updates on the product?
Still works as it should.
Nice video👍Where is the light source
Built into the strip
I installed the same one in my car after a few days the door lights stopped working except the driver door and the dashboard main controller,what do you think I should do
Probably shorted somewhere. I would disconnect all the doors first then test the main controller. Then carefully put things back door by door and make sure wires are not exposed or touching.
@@AutoSensation I open one door and checked the controller and then realised that I had the window function locked on the driver door and that’s why the controllers weren’t getting power ,silly mistake but I managed to fix it
@@shubhanrai6327 Good to hear you that it worked.
I guess you are from india were you got this product from bro??
@@ameymvlogssuperbiker bought it from a supplier on alibaba
Where is the direct link for this ambient light?
amzn.to/3zwOsN1
Thanks
No problem
hey bro i live in redondo beach california can i pay you to have you install these lights in my a90 supra
Sorry I live in Washington State.
i will pay your plane ticket have you fly down cali and install them for me
i can get it cheap from the hopper app
I wish I could bro. Just have no time.
@@becool565I like that
definitely looking forward to getting some of these. Do you know if you could connect these to a blue ghozt controller and make your own chasing effect?
I'm not sure
@@AutoSensation well I may have to try it
@Crue313 did you ever try it ?
@@Itz_Tayda not yet. My car is currently in the shop getting a new motor lol.
@@crue3139any updates?
can the led wires handle 90 degree bends?
No they cannot.
I would recommend these for 90 degree bends amzn.to/3gF3eXC
th-cam.com/video/UMXAFsEuVx0/w-d-xo.html
U can cut the strip and get extra wire and soilding them
showcasing and demo of ambient light in a bright ass room. Seriously? didn't turning off the light come across at any point?
I actually was looking for a video that shows how the lights do in bright areas. In my opinion, if you can see them during the day, that means they’ll be extremely bright at night. But it would’ve been nice to see both though.
Who the hell has a car from 1969. Of course it’s easy when only have to pop crap open
Hello, I managed to install the led strips on my dash using the main controller. I want to install the rest on the doors. Do the slave controllers automatically sync with the main one? Where could I draw power for the slave controllers inside the door panel?
Yes the slave controllers will sync automatically. If your vehicle has ambient door lights already you can tap into that. If not, you may need to run the wires to your fuse panel .