DIY Solar Tracker Using cheap car wiper motor Part 3

hi, guy thank for your support. these few month i didn't post any videos cause my channel have some problem. i try to solve it but still can't so i will move this channel to an other one. please follow my new channel via link below:
/ channel
hi this is part 3 of my new solar project at mango farm in Kompong Chhnang province, Cambodia. the system is 3kW solar array with single axis tracker, 5kW Growatt inverter and 9kWh LiFePO4 battery.
Please don't forget subscribe to my channel and click on the bell so you will not miss the next part that i will upload soon.
hope you like this videos thank you
Next Part
Part 1 • DIY Single Axis Tracke...
Part 2 • DIY 3kW Solar Panel fo...
Part 3 • DIY Solar Tracker Usin...
Part 4 • DIY Solar tracker cont...
Part 5 • DIY Solar Tracker Cont...
Part 6 • DIY Power Distribution...
Special thank to brother John Meas for advice
/ pisey.meas.9

[@michaelvanallen6400]

*Due to the extreme drop in the price of solar panels trackers are now superfluous. It is much cheaper and much more reliable to simply install more panels!*
Trackers are mechanics and need maintenance. And they are very susceptible to wind. For this reason and because of the mechanics, most of them only last a 1-10 years.
If you want more constant yields throughout the day, you simply have to set up the panels in an S-E and S-W orientation.

[@phil36135]

Is there a way to adjust for different times of year when sun is low in winter.Or maybe you are on the equator.?

[@og_tokyo]

you're referring to the sun shift which would need a turning in a circle vs follow linear trajectory. roll vs yaw.

[@bongobarta1908]

where are u from?? i want to made thin solar sun tracker for my solar plant.

[@JithinJose2]

Good video, can it handle the wind?

[@kimtinal9353]

Yes bro, i use thick steel for the structure. And also have the storm protection mode when wind sensor detect strong wind controller will move the panel to 12AM position or sleep mode.

[@JithinJose2]

@@kimtinal9353 nice, well done

[@kimtinal9353]

Thank bro

[@elmerwaltermeyer8340]

@@kimtinal9353 What goes with the blasting music

[@dpchoudhary12]

Really grateful

[@batarasitinjak5886]

what is the gear box?

[@imroz497]

What is motor voltage and RPM?

[@hjhhtcl3099]

Like

[@mahmutkurt9884]

hi dear, can you help me electronic departman.

[@junneilalad-ad4035]

What kind of motor did u use?

[@ruizlopezgabrielarturo3445]

it seem they used a car wiper motor

[@CoolDude-vc2fl]

Motor volts and current?

[@ruizlopezgabrielarturo3445]

12 Volts, its a common wiper motor for cars

[@therealcrazyal454]

Music to loud had to stop watching

[@robert5]

You know you have access to controls so you can turn it down or even.... turn it off. FIY I did not like it ether. In the circumstance like this I just turn it off.

[@lindamorgey6736]

I think you can see how to make it on Avasva . This is just an advice ;)