How To Replace Front Wheel Hub 2007-16 GMC Acadia
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2007-2016 GMC Acadia.
• Check here for more videos on the 2007-16 GMC Acadia: • GMC Acadia 2007-16 1st...
This process should be similar on the following vehicles:
2007 GMC Acadia
2008 GMC Acadia
2009 GMC Acadia
2010 GMC Acadia
2011 GMC Acadia
2012 GMC Acadia
2013 GMC Acadia
2014 GMC Acadia
2015 GMC Acadia
2016 GMC Acadia
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• 34mm Socket 1aau.to/oa/1AAS...
• Air Compressor
• Brake Caliper Hanger 1aau.to/oa/1AXA...
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• T30 Socket
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Drill
• Copper Anti-Seize
• Sledge Hammer 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
GMC Acadia 2007-16 1st Generation: • GMC Acadia 2007-16 1st...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Oh the lack of rust & ease of removal has me envious…& the way the wheel speed sensor came out in one piece, amazing! Lol
As a side note, the "spacer" at 2:58 in the video is actually the CV Axle Assembly Washer (ACDelco 11611965) is GMC specific, it isn't listed as a part for Buick or Chevy's. I just spent two hours trying to figure out what it was actually called and why it wasn't on my vehicle. :)
I hate these videos ONLY and just ONLY because they make it look waaaay to easy. But what an awesome jib sir.
When the man says be careful removing the speed sensor, LISTEN TO HIM! The driver's side on my Acadia was damaged during the wheel bearing replacement job. That stupid little sensor is routed through the fender, into the rear/bottom of the engine bay, and the electrical connection is placed UNDER the air filter box. Special thanks to the GM engineer that put that idea into action. What a pain to replace it! Save yourself over an extra hour of headache, and BE EXTRA CAREFUL when removing that sensor.
Noted🤣 about to drive our 2010 to my parent's house now to replace driver's side😁❤
Thanks you guys for doing the video. Just finished my son's 2011, did the the same side, ordered both bearings from the link, got the front set, comes out a lil cheaper, but your bolt sizes were all spot on. Thank God it wasnt' one like the video you guys got for the stuck wheel hub, that video gave me nightmare's before starting this one. Done in less than an hour. Oh and delivery time from A1 was like 2 days, insane fast for something that heavy.
+Dennis L Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
I saw no need to take of the wheel speed sensor . Why would he do that it was not on the way
Good morning family and good health to everyone especially MENTAL. Thank you very much for sharing. 👍🏼
Pay attention to the direction the brake shields are facing, especially making sure they curve outward/away from the rotor as they will dig into them. Excellent video!
+BustaNAugusta Thanks for watching our video! 1aau.to/m/Shop-TRQ
how long did you beat it with a hammer/slide hammer before it just so gracefully popped out?
Thank you. Your thorough details are much appreciated 🤗
Thank you!
Excellent video and workmanship
I could not remove the sensor as it was jammed. I continued anyway and finished the job without removing the sensor, which makes me believe this not a required step.
Thanks for all of the videos on Lambdas - thanks to your videos and parts I did the front lower control arms, struts, tie rods, sway bar links and bushings. Still have a vibration at high speed 70+ (4 new tires, alignment in the past 100 miles) thinking the bearings need to be replaced. How should I check?
+GRJ In MIA Thank you for your message. Currently, we are unable to do any diagnosis and would recommend asking a trusted Mechanic
That repair seemed straight forward enough.
I will probably be doing this on the wife's 2015. I haven't watched the whole video but will it need an alignment afterwards?
+Stärke Yes, an alignment would need to be done.
After depressing the brake caliper piston can you just leave it as is ? Will break pads fit the same ?
Great video! Where can I get that same torque wrench?
Great video, thanks!
Out of curiosity, I heard that the hub assembly could be the cause of the abs & traction control lights to be on. The abs code I have is for the front left speed sensor. I replaced both front left and right speed sensors on my 12 Acadia and still have the problem with the lights on. Could this be the issue? Not the hub itself the but magnetic ring the sensor reads from?
My CV axle is seized to the hub assembly. Tried many options including a brass punch/wheel hub puller/electric rotary hammer. Instead... can I just throw away the cv axle and whatever it's seized to... like the hub assembly or do I also need a new knuckle?
Should you replace both sides R/L or just the one that went bad?
man that hub bearing assembly "FELL OUT" compared to mine :(
Good stuff!!!
so how long did this take in real life? 🤣
some other fool on the Internet said 40 foot pounds for the hub bearing assembly bolts 😂
On my 2007 Arcadia the front right wheel feels wobbly..and it pulls to the right too... could this be a bad wheel bearing?
Definitely could. Check the strut mount from the top under hood to see if strut has gone thru it or is crooked. It just happened to me and wheel was wobbling / swaying
would a 2007 saturn outlook be the same.
No brake dust cover
Why wasnt any bearing grease put on the spines?
I replaced the assembly now the abs and traction light are on. Any tips?
possible the wheel speed sensors are dead.
Would this be the Same for a 2012 Chevy traverse
+Cesar Astorga The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
Next time compress caliber will.come off and go back on easier
Well shit, ill never get that dang axle nut off myself. i dont have air tools unfortunately 😭