**If the buttons, lightning port and wireless charging are not installed on the new back cover and you need to reinstall it, watch this video* th-cam.com/video/my1AxwrET2c/w-d-xo.html ***Links to screwdrivers and new back cover for iPhone XR in the description under the video*
Buy a pre installed housing not a blank housing trust me you will thank me later to transfer the volume power flex is easy enough but if u need to transfer new buttons into the new housing this is where your problems start you got tiny little brackets clipped onto the back off the buttons and need to be unclipped a certain way or they will either bend or snap so fiddly took me a couple of hours to get them back in tidily not worth the stress just buy housing that already have volume and power button installed save yourself the hassle as there's no video that shows how they are removed correctly
Your “replacement back” was probably from another working iPhone XR so you didn’t have to replace the lightning port, the buttons and the button cables, and the wireless charging pad
Yes, because in my case there was a replacement of the black housing with a coral housing, but if you need to replace the lightning port, the buttons and the button cables, and the wireless charging pad, watch this video th-cam.com/video/my1AxwrET2c/w-d-xo.html
@@howfixit when I’ve been taking the battery out I’ve made a small hole in the battery where the adhesive tape was will this effect the battery and will it make it dangerous to use with This tiny hole in it
Excellent video. Now I understand why the phone is considered "totaled" when the back glass cracks. Stupid design for a common occurrence, but great video!
So the back is not just the back glass - great idea for repairing ones iphone! A delish, fresh ground, coffee break! Aahh! - but also the mid-frame? Can the back glass be removed? Great video! Thanks 🤓 also, the new screen seal (in blue film) returns the device to a "water resistant, or proof" condition?
Hi, thanks for the great video! Regarding the tools, your video said you need a Tri-wing Y0.6 but the link to the screwdriver set only has a tri-wing 0.8? Can you use the 0.8?
@@howfixit the back cover is the glass & the frame (as one unit)? That might be why the back is expensive, but the touch/lcd screen is affordable! Thank you
I got a replacement that had the buttons and loudspeaker and lighting port and wireless charger already installed all I had to do was put the Logic board, battery, front camera/face Id, back camera, and Taptic Engine took only about 25 mins
To be honest in future il buy the housing that already has pre installed buttons as they were a nightmare to remove those brackets and put back into place
sir, I truly admire your work and believe that it is one of the most complex things to do, I need help in replacing my iPhone XR housing and am wondering if you could do it for me, ill pay you also but please help me, a few bullies in my school broke my iPhone, please let me know if you can i will be super grateful.
Hi I need your help if you could please , basically did this housing replacement also on the same phone everything works as it should apart from cellular signal does not get any higher than 1 bar of signal any ideas what maybe the issue please
And it's unlocked so tried every sim card in it but same result every time 1 signal bar this makes phone calls very hard to hear due to poor signal strength I'm leaning towards a new cellular flex but not sure which flex I'd need to order
Some housings already come with this pre-installed. You can buy them with just the bear housing or with the small parts already installed for a little more. Imo i think its worth the extra money having the parts pre-installed
**If the buttons, lightning port and wireless charging are not installed on the new back cover and you need to reinstall it, watch this video* th-cam.com/video/my1AxwrET2c/w-d-xo.html
***Links to screwdrivers and new back cover for iPhone XR in the description under the video*
@How-FixIT how long did the whole process take?
I’m doing this I have a white iPhone XR and I’m turning it into a red iPhone XR Im exited
Mee too :3
Same I’m stoked
Buy a pre installed housing not a blank housing trust me you will thank me later to transfer the volume power flex is easy enough but if u need to transfer new buttons into the new housing this is where your problems start you got tiny little brackets clipped onto the back off the buttons and need to be unclipped a certain way or they will either bend or snap so fiddly took me a couple of hours to get them back in tidily not worth the stress just buy housing that already have volume and power button installed save yourself the hassle as there's no video that shows how they are removed correctly
Excellent video, you are a micro surgeon!! congrats!!!!
Excellent work sir ...
Best video !!! Totaly recommend espacially for the assembly part !
Your “replacement back” was probably from another working iPhone XR so you didn’t have to replace the lightning port, the buttons and the button cables, and the wireless charging pad
Yes, because in my case there was a replacement of the black housing with a coral housing, but if you need to replace the lightning port, the buttons and the button cables, and the wireless charging pad, watch this video th-cam.com/video/my1AxwrET2c/w-d-xo.html
I had to all figure it out myself cuz i couldn't find any proper guides online but luckily it's the same as other models
@@howfixit when I’ve been taking the battery out I’ve made a small hole in the battery where the adhesive tape was will this effect the battery and will it make it dangerous to use with This tiny hole in it
@@xijordyixxijordyix4392that makes the battery likely to explode 👍
Excellent video. Now I understand why the phone is considered "totaled" when the back glass cracks. Stupid design for a common occurrence, but great video!
were you expecting glass that is flexible??
So the back is not just the back glass - great idea for repairing ones iphone! A delish, fresh ground, coffee break! Aahh! - but also the mid-frame? Can the back glass be removed? Great video! Thanks 🤓 also, the new screen seal (in blue film) returns the device to a "water resistant, or proof" condition?
Yeah that adhesive with the blue film makes it water resistance again!
@@anthonyjones8734 ok thanks! 🤓
It should but it probably won't be as good as the original seal so you will want to be careful around water
@@R_BS-ug3ck it won't be factory sealed, but should be somewhat waterproof. Thanks
Hi, thanks for the great video! Regarding the tools, your video said you need a Tri-wing Y0.6 but the link to the screwdriver set only has a tri-wing 0.8? Can you use the 0.8?
Bro thanksu alot iam learning much!!
Great video sir!! Thank you!! Sir do you have a new link for the rear glass with the cables? Thank you
I found a great one one ebay with cables and lightning port installed for £37
@@CTGFMwhat’s this called?
You don’t show taking off the lightning port and the replacements don’t come with them
If on the new case there is no lightning port and buttons, watch this video th-cam.com/video/my1AxwrET2c/w-d-xo.html
@@howfixit the back cover is the glass & the frame (as one unit)? That might be why the back is expensive, but the touch/lcd screen is affordable! Thank you
I got a replacement that had the buttons and loudspeaker and lighting port and wireless charger already installed all I had to do was put the Logic board, battery, front camera/face Id, back camera, and Taptic Engine took only about 25 mins
@@anthonyjones8734 May I ask where you bought it?
@@Henry-yg1yc on eBay for 50$ just look up iPhone XR housing fully assembled!
Thank you very much Brother. It's so perfect.
God bless you always...❤️
Philippians 4.19
A tiny screw fell out of the bottom of my Iphone xr, If i use the correct screwdriver, can I put it back on the bottom?
Congratulations bro!
You're a professional so mininitious!
congrats on your new word
Just wondering why not leave the back camera as it is as the screwdriver is special and hard to find. Please advise.
You don’t have to keep the wireless charger pad with the same mother board like touch and Face ID?
You didn't remove the volume flex, buttons or chargeport.... every video on youtube is the same, jesus I just want answers.
Does anyone know where I can buy a back housing with all the cables connected to it
what about the wireless charging and all the other cables and screws? seems like half the work ;). thanks for sharing
Aha,well mine did not have that. Thanks, I figured it out. Took many hours. Cheers
To be honest in future il buy the housing that already has pre installed buttons as they were a nightmare to remove those brackets and put back into place
Could heat right on the screen like that, could it mess up any parts inside the phone, like that battery?
Francis O I’ve done this replacement and no damage happened to me so I don’t think so
The savage string ok thanks
sir, I truly admire your work and believe that it is one of the most complex things to do, I need help in replacing my iPhone XR housing and am wondering if you could do it for me, ill pay you also but please help me, a few bullies in my school broke my iPhone, please let me know if you can
i will be super grateful.
Helped with one of my repairs from start to finish. Thanks
Beautiful
yeah I got the blank one so that means buttons and and wireless charging
How to replace buttons and wireless charging, watch in this video th-cam.com/video/my1AxwrET2c/w-d-xo.html
so fast! Thanks! :D
Hi I need your help if you could please , basically did this housing replacement also on the same phone everything works as it should apart from cellular signal does not get any higher than 1 bar of signal any ideas what maybe the issue please
And it's unlocked so tried every sim card in it but same result every time 1 signal bar this makes phone calls very hard to hear due to poor signal strength I'm leaning towards a new cellular flex but not sure which flex I'd need to order
Found the fault the antenna flex at the top of the phone the one with 2 silver circle holes had snapped so replaced now full signal :)
Left a few steps out there, didn’t you?
What are the specific steps? you can give a detailed question
sir where did you buy this specific back housing
how to remove the glue pad from the battery?
Thank you!!!
would it be easier to just switch logic board over to another xr if its locked
if replace motherboard, you also need to reinstall + faceid module + sensors on display module
hello sir, can you replaced my back housing?
Ciao il laboratorio è in italia? come posso contattarti?
How to replace ixr flashlight?
Sorry know this was 10 months to late lol but to fix flashlight you need to replace volume/ power flex as the flashlight is connected to that
Background music name please
mantap asikkk🤙🤙
Mujhe eski madar bord lena hai kitne ki mil jayegi
there's dust and lint under my back glass. i'm just going to leave it alone thanks anyway.
time to repair?
Turn iPhone XR into iPhone SE
So stupid...
@@vonn1334 just like you
Pointless video if you’re not showing the difficult parts to replace like volume and power buttons etc!
Some housings already come with this pre-installed. You can buy them with just the bear housing or with the small parts already installed for a little more. Imo i think its worth the extra money having the parts pre-installed
He has a video for that
this iphone is not a xr
New York @1:36
Why dont you show the back side of the phone? Seems like it doesent look like the original Apple housing..
He does in the beginning what u mean....
you forgot to show us to unscrew the pentalobe screws before opening the screen..
💪🏾💪🏾💪🏾🤣🤣🤣🤣🤣🤣🤣🤣🤣 caffe 🍵☕🍵🥧☕☕☕☕☕☕☕
.... forgets to mention the screws are fucking solid to get out, fucking horrible phone to repair