Well, it’s just that easy! Seriously though, you are AMAZING....I could get as far as getting the vehicle jacked up...a man has to know his limits! Well done, Sir!
I’m currently doing this on axel stands and in the video you can’t see how tight every bolt is to the gearbox it’s an absolute nightmare, if you’ve got the money I’d definitely recommend using a garage but if not a sweat jar could be quite beneficial 😂
How many of these have you done, quite a few id imagine?, to do a clutch like that without a ramp isnt an easy feat and you do it methodically, very good video!
That's for the safety purpose. 😅😅😅😅 Or at least if the supervisor watch him his is alright .. he knows that only 2 are enough, but for others that watch the video won't get confused and do the same without even knowing what the risks are .
I have a 2014 Ford Transit Connect 2.5 liter automatic USA and it stopped going forward or in reverse one day I put it throught the gears and it would not move Engine smooth and when I cut it off it would not crank the engine you could only hear the strater spin. I took the belts off to make sure no pulley siezed and cleaned the grounds same thing starter just spns and the crank does not turn. I turned the engine clockwise with a long extension to make sure the engine was not locked. then I changed the starter same thing. with the starter off if I turned the crankshaft the flly wheel would turn but when i turned the flywheel clockwise the crank doesnt turn I do see all of the flywheeel bolts still connected. Do you think it is the flywheel/flexplate that is broken???
A bit hard to say for definite. But from experience what you’re describing sounds like a slipped timing belt and no compression on engine. Possible bent valves. Be interesting to know when you find out the issue. Let us know.
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
Man i am mechanic also...but you are in another level out there without ramp!!! Awesome!
NIKOLAS VELEZIS
Nice to hear from a fellow mechanic.
What do you mean? There's nothing more fun than doing a clutch on your back haha
Well, it’s just that easy! Seriously though, you are AMAZING....I could get as far as getting the vehicle jacked up...a man has to know his limits! Well done, Sir!
First class job, with an excellent video👍
Thank you.
Очень очень хорошая работа выднотчто вы специалист и знаете что делаете !
I’m currently doing this on axel stands and in the video you can’t see how tight every bolt is to the gearbox it’s an absolute nightmare, if you’ve got the money I’d definitely recommend using a garage but if not a sweat jar could be quite beneficial 😂
Top man 👍
Im changing my gearbox tomorrow
Excellent video! Thanks for Sharing! 😎🔝🔝🔝
Wuauuu!!! Amazing! Thanks for sharing!
thanks for the video helped me out big time
Andrew McMahon glad the vid came through for you pal.
2 mins in and ive decided to leave it to a garage to do 🤣😂
👍👍👍well done!!!!
Класс, приятно смотреть.
How many of these have you done, quite a few id imagine?, to do a clutch like that without a ramp isnt an easy feat and you do it methodically, very good video!
Nice job. Respect 😊
🍻🍻
Danke, спасибо, thank.
I can see you've loads of axle stands. Just as well when one of them moves when you take the first wheel off!
That's for the safety purpose. 😅😅😅😅 Or at least if the supervisor watch him his is alright .. he knows that only 2 are enough, but for others that watch the video won't get confused and do the same without even knowing what the risks are .
Nice 👍👍👍👍
how many km did it last?
I have a 2014 Ford Transit Connect 2.5 liter automatic USA and it stopped going forward or in reverse one day I put it throught the gears and it would not move Engine smooth and when I cut it off it would not crank the engine you could only hear the strater spin. I took the belts off to make sure no pulley siezed and cleaned the grounds same thing starter just spns and the crank does not turn. I turned the engine clockwise with a long extension to make sure the engine was not locked. then I changed the starter same thing. with the starter off if I turned the crankshaft the flly wheel would turn but when i turned the flywheel clockwise the crank doesnt turn I do see all of the flywheeel bolts still connected. Do you think it is the flywheel/flexplate that is broken???
A bit hard to say for definite.
But from experience what you’re describing sounds like a slipped timing belt and no compression on engine.
Possible bent valves. Be interesting to know when you find out the issue.
Let us know.
The engine was running perfect after it stopped moving in the U.S. the Transit Connect has a timing chain.
Can anyone tell me how to bleed the clutch on a transit connect SAP please
Do you go to Essex?
martin jones
Yes we do.
hello what brand is the screwdriver?
Sofien El Hadi they are sealey pro
Hi Kevin how much is it to do this job please
Gavin Mck please contact us on.
www.williamsmobileclutch.co.uk
07376369067
Don’t suppose you operate in the North East do you please Kevin?
Kevin Horan
We de 70 miles radius from Bedford
These engines are reliable, any known problems?
I used to own one. Only slight issue was fuel pump..,, as far as I can remember
@@WMCS Ok, thanks
How much for this job on the same van please?
www.williamsmobileclutch.co.uk
Hi mate , how often does gearbox oil have to be changed ?
Thanks
Фокусник!