⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I have a 2006 Dodge Charger RT and the red lightning bolt is flashing on my dash. I changed the accelerator pedal sensor and the light is still on and flashing. I also changed the throttle body and it was still on and flashing. The car does start. What else could it be?
EXACT same problem on my 2006 charger 5.7 Hemi. I've taken it to so many shops and they've rep;aced just about everything except for the accelerator pedal (sensor is on the pedal). Bought one yesterday and praying this will work.
I have a 2006 Ram with a 5.9 with code 2121 apps sensor I bought néw pedal position sensor replace and now I have 3 codes 2121 2127 2128 and I get nothing from pedal my % reads zero from top to bottom if I press the pedal with the orig pedal it read % but had a dead spot where it went back to zero I’m completely lost on second new pedal I thought it was defective but doing exactly same thing have any ideas
Changed the pedal with sensor still same code p02122 and red flash..scanner deletes the code it comes back again.note costumers car i wud never buy a dodge ir Chrysler anyway lol
Obviously you didn't watch the video. He couldn't even accelerate/give it gas at all. He change the pedal and now he can give it gas so #1 he did fix the problem &2 you have to clear the code. It wont go away on its own.
I replaced mine in my 2013, did the reset an still staying in limp mode, I’ve tried disconnecting the battery, fuse, any reset online you can think of, I’ve tried, still in limp mode… any suggestions
@@bigswervo434 yeah I did find out the problem I had recently removed a pedal command from my car and apparently there was a wire that was still part of the pedal command the past to the throttle control so all I did was remove it and everything went back to normal
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Where is the video on how to actually fix it?
I have a 2006 Dodge Charger RT and the red lightning bolt is flashing on my dash. I changed the accelerator pedal sensor and the light is still on and flashing. I also changed the throttle body and it was still on and flashing. The car does start. What else could it be?
Did you ever find out? I am having the same problem
Terrence Richardson mine doing the same thing did you ever find out
I really need to find out
@@willchestnutt4138 depending on the model the pedal might not have the throttle position sensor attached to it. Hes working on a newer vehicle
EXACT same problem on my 2006 charger 5.7 Hemi. I've taken it to so many shops and they've rep;aced just about everything except for the accelerator pedal (sensor is on the pedal). Bought one yesterday and praying this will work.
I want to say Thank You for this video.. I have a 2013 RT.
Can you comment the link to find the video you were talking about for replacing the pedal?
I have a 2006 Ram with a 5.9 with code 2121 apps sensor I bought néw pedal position sensor replace and now I have 3 codes 2121 2127 2128 and I get nothing from pedal my % reads zero from top to bottom if I press the pedal with the orig pedal it read % but had a dead spot where it went back to zero I’m completely lost on second new pedal I thought it was defective but doing exactly same thing have any ideas
I have same problem on my 2012 Toyota Camry but I can give it some gas. I erase codes they still come back and problem is still there code p2122
Can you please do a video on how to fix the heater core in a 2007 VW Beetle
Changed the pedal with sensor still same code p02122 and red flash..scanner deletes the code it comes back again.note costumers car i wud never buy a dodge ir Chrysler anyway lol
Huh? Wtf, You just cleared the codes?! What exactly did you do to fix it? All you did was clear the codes, so the owner THINKS you fixed it.
Obviously you didn't watch the video. He couldn't even accelerate/give it gas at all. He change the pedal and now he can give it gas so #1 he did fix the problem &2 you have to clear the code. It wont go away on its own.
@@veronicagarcia827 that’s not a fix, he will be able to drive home but the code will come back within a week because problem still exists
Change your throttle body and you done with
Guys, guys, guys, guys, guys, guys. Stop!
WTF are you wearing? Looks like your ready to pit a formula 1 car.
Wtf does it matter what hes wearing..are you here to watch his cloths or actually learn something you need help with...😒
I replaced mine in my 2013, did the reset an still staying in limp mode, I’ve tried disconnecting the battery, fuse, any reset online you can think of, I’ve tried, still in limp mode… any suggestions
What is you change the accerator panel sensor and it doing same think won't accerator up
@@DickieSmith-k4z can’t accelerate, stays in limp, done everything i can think of may need to swap my throttle body to factory, see it does idk
@@Raizo177did you find out the problem?
@@bigswervo434 yeah I did find out the problem I had recently removed a pedal command from my car and apparently there was a wire that was still part of the pedal command the past to the throttle control so all I did was remove it and everything went back to normal