How to UPGRADE Your GBA SP! (In Depth Tutorial)

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024
  • I promise I don't like the SP. I just make a lot of videos about them for you guys
    Subscribe to the 2nd channel: www.youtube.co...
    The SPs from the video: retroremastere...
    Save 10% on The Great Wave shell at ExtremeRate with code JAKE www.gamingcobr...
    Amazon link for ExtremeRate Shells:
    amzn.to/3advm3P
    amzn.to/3GDBrmD
    Get the Mod Kits Here! (Use Code JAKE to Save!)
    US: tinyurl.com/5b...
    Europe: tinyurl.com/3n...
    Other Pre-Cut Shells! (Use Code JAKE to Save!)
    US: tinyurl.com/mt...
    Europe: tinyurl.com/52...
    UV Printed Shells: tinyurl.com/2s...
    My Website: retroremastere...
    Discord: / discord
    Instagram: / retroremastered
    Twitter: / jakesimmonsyt
    All My Other Links: linktr.ee/jake...
    My Tools: retroremastere...
    My Favorite Mods: retroremastere...
    Replacement Parts: retroremastere...
    Companies and fans can send stuff here! DISCLAIMER: YOU WILL NOT GET ANYTHING BACK UNLESS PREVIOUSLY DISCUSSED! EVERYTHING WILL BE CONSIDERED AS A GIFT!
    Jake Simmons
    311 SW 2nd St #2502
    Corvallis, OR 97333
    Songs:
    • Dj Quads - You're The ...

ความคิดเห็น • 162

  • @jericho357
    @jericho357 ปีที่แล้ว +4

    This is by far the best video for modding your Gameboy SP. I just modded my Gameboy with a IPS V2 HISPEEDIDO. It look great and I can't thank you enough. Its now time for some Metroid Fusion.

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      Thank you for the kind words!

  • @zubairaliamirali
    @zubairaliamirali 2 ปีที่แล้ว +22

    Did the whole swap. My first experience with any mod including soldering.
    Thank you for it

    • @Vic_Chaos_
      @Vic_Chaos_ 22 วันที่ผ่านมา

      @zubairaliamirali on a scale from 1 to 10 how hard did you think it was?

  • @riptide8718
    @riptide8718 ปีที่แล้ว +12

    Thanks! Just upgraded an old SP from eBay using this guide! ips display, Pokedex shell and mahko's drop-in battery mod. Super helpful to be able to see every step and follow along!

  • @nicksteeves3652
    @nicksteeves3652 ปีที่แล้ว +13

    I'm upgrading my SP and this is the first time I've attempted modding before. Definitely using this vid HEAVILY to make sure I don't mess up the sodering or anything else!

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      Good luck!

    • @RebelOnision
      @RebelOnision ปีที่แล้ว +1

      For people reading this, make sure to practice soldering on a test kit before doing it on your 60 dollar+ handheld. It's a useful skill to get good with and will only be more useful as time goes on.

    • @SubzeroYoutube
      @SubzeroYoutube 7 หลายเดือนก่อน

      @@RebelOnision Recommended testkit?

  • @l3p990
    @l3p990 ปีที่แล้ว +1

    Just replaced my faulty L button, got a new casing and soldered the ips mod in. It was the first time I tried soldering to such an important piece of memorabilia, so I did a practice kit first. I could not have done this without your guidance through this video, your links to replacement parts and the solder tool kit on your website.
    I am extremely grateful for you giving me a worthwhile memory to look back on. Subbed!

  • @donaldwingo9294
    @donaldwingo9294 หลายเดือนก่อน

    Just followed your guide to the letter. Had a slight issue getting the ribbon cable pushed in far enough but got it eventually. Now I have a gba sp looking like a beautiful pokedex with a shiny new screen. Absolute great job with the walk-through. Many thanks!

  • @LionStark
    @LionStark 2 ปีที่แล้ว +26

    just used that white wave shell myself, the build quality and the finish is really nice!

  • @Soosheon
    @Soosheon ปีที่แล้ว +8

    Don't tell me what to do.

  • @earthskarma
    @earthskarma ปีที่แล้ว +4

    This is fantastic Jake, thank you so much. I followed this video as spoon-fed instructions while I did my shell and screen mod from retro game repair shop (use code Jake). I had excellent results. Awesome sauce. 🤘

  • @823Brad
    @823Brad ปีที่แล้ว +1

    So glad I found this video as I'm looking to swap my sp to another shell and mod that sp. Can't wait to follow along with your video!

  • @oatiswuff
    @oatiswuff ปีที่แล้ว +8

    I'm still scared to do this BUT this is giving me a lot of confidence with how easy it looked for you!

    • @oatiswuff
      @oatiswuff ปีที่แล้ว +7

      Update! I just did the screen and case swap (with saudering that I've never done before!) And it all went smothly!

    • @Solontire
      @Solontire ปีที่แล้ว

      Any experience with soldering? I’m waiting on my screen and have no experience, but going to try my hand with soldering as well. Any tips or recommendations now that you’ve done it?

    • @rnase3970
      @rnase3970 ปีที่แล้ว +1

      @@Solontire Buy flux, soldering is much easier with flux.

    • @Solontire
      @Solontire ปีที่แล้ว

      @@rnase3970 will do appreciate the tip. I assume any reputable brand will do? Also is soldering paste different than flux? My soldering kit I got off Amazon which was rated as a “good starter kit for beginners” came with soldering paste but not sure what that is.

    • @rnase3970
      @rnase3970 ปีที่แล้ว +1

      @@Solontire Yeah, anything should be fine

  • @utflaco811
    @utflaco811 9 หลายเดือนก่อน

    Completed this mod with a new shell and an LED board thanks to this video. Challenging but not overly difficult thanks to these detailed instructions. Thanks Jake!

  • @Emmanuel-ti6ym
    @Emmanuel-ti6ym 5 หลายเดือนก่อน

    This was a lifesaver, saved me hours of time and pain. More challenging than putting a laptop together. Unfortunately, mine didn't come with a wire. I did purchase a soldering kit just for this project. The new screen is vastly better and the image is much sharper! Just need to find out where I can find the proper wire by itself.

  • @matthewbarrios1028
    @matthewbarrios1028 11 หลายเดือนก่อน +2

    The hinges are like $4. If that is the make or break of you modding your SP, you shouldn't be buying an IPS mod and new shell.

  • @k0dyw1thaK
    @k0dyw1thaK ปีที่แล้ว

    You're sick! Just finished the mod, thanks for the Walkthrough : D

  • @BongoBrando
    @BongoBrando 6 หลายเดือนก่อน

    I watched this video countless times in preparation and also while I was putting this exact screen into my SP. It's working flawlessly! However I have not soldered as I have no experience.
    I'm currently practicing on and old motherboard of mine until I feel confident enough

    • @JakeSimmons
      @JakeSimmons  6 หลายเดือนก่อน

      Very nice! If you ever pop in a stream, I can show off how I solder and guide you through it

  • @Clanps
    @Clanps 2 ปีที่แล้ว +7

    The SP was the first system I did any major changes to. I did a full case swap and screen replacement.

  • @Erw-In
    @Erw-In ปีที่แล้ว

    Great tutorial! Just modded my second SP while using this as a guide. Keep it up Jake!

  • @WhiteInk47
    @WhiteInk47 5 หลายเดือนก่อน +1

    Me scrolling through all these mod videos with absolutely no intention of modding my gba.

  • @carsonsharp2339
    @carsonsharp2339 ปีที่แล้ว

    I did it! Thanks man. Watched allot of your content before trying.

  • @pixiestardust69
    @pixiestardust69 ปีที่แล้ว +1

    used this to mod an old 001 i had lying around. It has a whole new life now ! Mario and luigi superstar saga never looked better

  • @birdfish86
    @birdfish86 10 หลายเดือนก่อน

    Have modded multiple gameboys. Have no need for these tutorials but I still like watching them for some reason. 😅

  • @SaraAB87
    @SaraAB87 ปีที่แล้ว

    I just made one with a kit I bought from Aliexpress with a drop in LCD (No soldering) and it works perfectly thanks to your video!

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      That’s awesome haha I just did a video on a drop in kit for the sp today

  • @saraherae1400
    @saraherae1400 ปีที่แล้ว

    I've never modded anything before. I just used this kit yesterday on my GBA SP (clear pink shell). If you follow along with the brands TH-cam tutorial video, you won't have any issues. As you can tell from this video there are a lot of steps but it's nothing crazy.

  • @outdoorsgamerTv
    @outdoorsgamerTv ปีที่แล้ว

    I bought this exact case and same screen 😂 building mine this Saturday once my screen gets here, matches one of my tattoos so I'm inlove with this case design

  • @spicytunaroll559
    @spicytunaroll559 2 ปีที่แล้ว +5

    The wave is 🔥

  • @ZeroTwo-bd8ni
    @ZeroTwo-bd8ni 2 ปีที่แล้ว +77

    i still have my gameboy sp but im afraid to mod it

    • @thomasmoore3293
      @thomasmoore3293 2 ปีที่แล้ว +10

      do it! it brings it back to life

    • @subtoyoungfogo
      @subtoyoungfogo ปีที่แล้ว +9

      Don't do it keep your memories

    • @Gxbe710
      @Gxbe710 ปีที่แล้ว +39

      How about you do whatever you want and not worry about what anyone else thinks.

    • @slushyyffa9240
      @slushyyffa9240 ปีที่แล้ว +5

      @@Gxbe710yea guys🤓

    • @KingLarbear
      @KingLarbear ปีที่แล้ว

      Do it

  • @robertneumann180
    @robertneumann180 2 หลายเดือนก่อน

    If you’re afraid to mod your gba sp, don’t be. I’m a complete beginner and was able to do this mod. I did break off the volume button.. make sure to remove it before putting the motherboard back in the shell. In the video he just talked about removing the volume button “if you haven’t yet” when the motherboard was already installed. Fml otherwise this build is super easy.

    • @Kyubbigirl
      @Kyubbigirl 2 หลายเดือนก่อน

      I’m actually debating on modding my sp from childhood and your comment is making me feel a bit better. So you’ve never done solder work before and you found this mod to be easy?

  • @azoo_23
    @azoo_23 ปีที่แล้ว

    Thank you so much! your video was very useful, I wish I had took you advice about the volume button, I broke it! XD however I ordered a replacement.

  • @TTV_HAZEL
    @TTV_HAZEL 2 ปีที่แล้ว +1

    Great vid man I’m a new subscriber and I really enjoy your content

  • @Thryce23
    @Thryce23 2 หลายเดือนก่อน

    I mean, i just added a new shell and an aftermarket funnyplaying screen a few days ago. I managed to get it to all work after a few hours with little to no clue on what i was doing. The hardest part was figuring out the video ribbon needed to curl to move over and fit in the hinge area

  • @lildagnamet8760
    @lildagnamet8760 ปีที่แล้ว

    Am a mod noob and I have done 2 eXtremeRate mods, their Scarlet Red shell with chrome gold buttons for my SP and Classic NES Style shell for my GBC (added a black lit screen) and they were all great. Tutorials were great when I got stuck though.

  • @ThinkBeforeYouSleepYT
    @ThinkBeforeYouSleepYT ปีที่แล้ว +1

    The only thing I came here for was to learn how to put on the Nintendo logo on the top of the shell and YOUR CASE DOESN'T HAVE ONE. How do I put that damn thing on? I started by just placing it in the little slot thing. That didn't work. Then I thought it was a sticker so I removed the bottom part from the top of the logo and it turns out it wasn't a sticker and I ruined it. I'm confused.
    Outside of that, this was the best video I have seen so far on the screen mod. I wish I saw it before I modded mine because it would have made my life a lot easier.

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      It is a sticker so you probably ripped the sticky part off😬

    • @ThinkBeforeYouSleepYT
      @ThinkBeforeYouSleepYT ปีที่แล้ว

      @@JakeSimmons Found it. Thanks. Unfortunately, I already destroyed it so I'll have to order another one. Seems like the only company that sells them is in Australia so I guess it won't be ready in time for Christmas.

  • @josevirginia2577
    @josevirginia2577 2 ปีที่แล้ว +1

    Loved the tutorial man this thing is legit 100% !! althogh i wish if theres a way you can do it on computer

  • @rexkzo4578
    @rexkzo4578 8 หลายเดือนก่อน

    Before I thought sps don’t suck but now I agree with you sps do suck

  • @leoneazy3800
    @leoneazy3800 ปีที่แล้ว

    Wow ngl this all white model looks miiint

  • @MorlordsYTK
    @MorlordsYTK 8 หลายเดือนก่อน

    8:43 one for left one for right

  • @GamersWorld22
    @GamersWorld22 ปีที่แล้ว

    I’m glad you are noting what screws ur using I feel like people skip that part

  • @sonicspin001
    @sonicspin001 ปีที่แล้ว +3

    hey man, I recently modded my sp and wanted the usb c charging as the last touch but tripped at the finish line

  • @jeffdewe
    @jeffdewe ปีที่แล้ว

    Actually swapping sides of the pins might make more sense if you think about bearing wear.

  • @gaivoron
    @gaivoron 2 หลายเดือนก่อน

    Wait this was the hardest install? I knocked it out in a few. Woohoo

  • @jellocat9244
    @jellocat9244 10 หลายเดือนก่อน

    I customized mine and the only annoying issue I had is that the long screw that locks down that piece of hinge, broke inside and so that hinge piece is loose. It doesn’t stop it from closing as I push the piece in.

  • @mratkinson2265
    @mratkinson2265 ปีที่แล้ว

    Nice video fella, what solder would you recommend to use 👍

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      I believe I have some linked in the description but pretty much any electrical solder will do. I prefer lead free stuff

  • @Hero1117a
    @Hero1117a 2 ปีที่แล้ว

    Luv the intro

  • @paramkore1101
    @paramkore1101 3 หลายเดือนก่อน

    I’ve watched so many videos and I still have one thing I’m super confused about. I bought a shell and I have an sp 101. I just want to replace the shell, do I still need to solder that wire on or is that only if I’m replacing the screen with a new screen? Sorry if this is a silly question, this is my first time ever doing this

    • @JakeSimmons
      @JakeSimmons  3 หลายเดือนก่อน

      No need to do soldering if you are using a 101 screen

  • @danielrolon56
    @danielrolon56 ปีที่แล้ว

    Hey I followed your tutorial and it helped me so much when swapped shells and upgraded the screen, thank you! I am also using the same brand shell too, although a few days ago my shell started making a squeaking noise every time I close it, is there anything I can do to fix this?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      I’d guess it’s gonna go away over time but I really don’t know

  • @Dark03
    @Dark03 2 ปีที่แล้ว +2

    I accidentally bought a shell that is not cut out for IPS screen so would like some advice on how & what tools to use in order to mod the shell to fit the IPS screen in it instead of just buying a new shell

    • @JakeSimmons
      @JakeSimmons  2 ปีที่แล้ว +1

      I have never trimmed an SP shell before but I use flush cutters and my dremel to cut other shells

  • @louiskorber8927
    @louiskorber8927 7 หลายเดือนก่อน

    On amazon there was one review that mentioned that the white shell got a yellow tint after a while. Did you experience something like that for yourself?

    • @JakeSimmons
      @JakeSimmons  7 หลายเดือนก่อน +1

      I have yet to experience that. Keep your hands clean, don’t smoke, and don’t store it in direct sunlight and you’ll be fine

  • @DanHorizon
    @DanHorizon 2 ปีที่แล้ว +1

    idk if I am missing this on the retro game repair shop site but which one is the mod kit used for this build?

    • @JakeSimmons
      @JakeSimmons  2 ปีที่แล้ว +1

      retrogamerepairshop.com/collections/gba-sp-displays/products/game-boy-advance-sp-backlight-mod-kit?variant=31378079744074

  • @Kukujack42
    @Kukujack42 ปีที่แล้ว

    Are you able to check out a gameboy that doesn’t charge but powers on to see if adding a charging port will fix it

  • @artlessdiamondmedia
    @artlessdiamondmedia 5 หลายเดือนก่อน

    I love the SP but DS Lite is king for authenticity and 3DS is world leader for R4 roms & steam deck is a galactic alien who knows all

  • @mattreynolds5122
    @mattreynolds5122 2 หลายเดือนก่อน

    I’m having a literal nightmare swapping my sp 😡

  • @SuperSkip64
    @SuperSkip64 ปีที่แล้ว

    At 17:08 are you just using the head from the soldering iron to melt the wire onto the contact point or are you adding a teeny bit of solder metal to it?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      There has been a bit of solder there already so I didn’t add any. But you should add some solder to it first

    • @SuperSkip64
      @SuperSkip64 ปีที่แล้ว

      @@JakeSimmons sweet! Thanks for the reply! I’m looking forward to getting into this stuff 😄

  • @TemperWolves
    @TemperWolves 7 หลายเดือนก่อน

    Soon as bro why SP sucks click of the video and left

  • @brandonrandle6996
    @brandonrandle6996 ปีที่แล้ว +1

    Just modded my original 001 that I've had since it came out. Never done anything like this before, yet it went incredibly smooth thanks to this video! Used the same shell and one of the recommended IPS screens, and it's wonderful. Thanks for putting this video out!
    One thing I have noticed while playing today for a bit after making the changes is that sometimes the screen image will freeze but the game is still playing (Pokemon Emerald, and I've managed to save, power off/on and the screen works again). Anyone have any thoughts as to why that might be?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      I actually just had that happen for the first time ever on a customer’s game boy. It’s a problem with the ribbon cable which is unfortunately the expensive part. The only way I know how to fix it is to replace it :/

    • @brandonrandle6996
      @brandonrandle6996 ปีที่แล้ว

      @@JakeSimmons Thanks for getting back, and so fast!
      That makes sense! Do you know offhand if it's possible to buy just the cable, or should I order and replace the whole screen?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      @@brandonrandle6996 you can buy them separately but it looks like everyone is sold out of just ribbons. You might be able to ask customer support if they could sell you just a ribbon

    • @brandonrandle6996
      @brandonrandle6996 ปีที่แล้ว

      @@JakeSimmons I'll give that a go, and just get a whole 'nother set if that doesn't make it. Thank you VERY much for your help and guidance! Keep up the great work!

  • @jackburton3175
    @jackburton3175 ปีที่แล้ว

    hey Jake, you ever use the retroglow mod? if not, why not?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      I’m not familiar with it

  • @gabrielnobrega4521
    @gabrielnobrega4521 8 หลายเดือนก่อน

    you're a god, with your tutorial I could upgrade my poor SP

  • @startingwithnothing5423
    @startingwithnothing5423 4 หลายเดือนก่อน

    Think I will keep my sp stock and just mod my gba lol

  • @beachside_Reptiles
    @beachside_Reptiles 10 หลายเดือนก่อน

    Followed the build video and somehow the thing won’t charge. The light won’t even turn on when it’s plugged in. Wonder what i messed up on

    • @JakeSimmons
      @JakeSimmons  10 หลายเดือนก่อน

      Does the orange light flash at all when it plugs in or is there no orange light at all?

  • @bobthebuilder3485
    @bobthebuilder3485 ปีที่แล้ว

    I also found the same case on Aliexpress, does the company also sell it there ?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      They do but they are the same prices and you can’t use my code to save money on AliExpress

  • @DarthBreh
    @DarthBreh 2 หลายเดือนก่อน

    Wait how do we swap the volume switch cover mine doesn’t come out, it feels like I’m forcing too hard and it won’t come out.. 18:18

  • @alex6qc706
    @alex6qc706 ปีที่แล้ว

    I had to open mine recently to fix an inge and was litterally at the verge of SHITTING myself because of the ribbon cable

  • @jordanmoorman8773
    @jordanmoorman8773 ปีที่แล้ว

    Will the black precut screen be installed the same way into the white case?

  • @mattreynolds5122
    @mattreynolds5122 2 หลายเดือนก่อน

    I can’t get the ribbon to stay in I think there is a short in it

  • @psamp08
    @psamp08 10 หลายเดือนก่อน

    I just did a full mod on my SP and got OEM replacement hinges from retro game repair shop. I followed your steps to install. The gb closes and opens to the correct position but there is no click. Would you happen to know the reason for this?

    • @JakeSimmons
      @JakeSimmons  10 หลายเดือนก่อน

      I've always heard that it doesn't matter which side you put the hinges in on, but every time I have them flipped, they don't click. You can always try flipping the hinges to the other sides if it bothers you that much

  • @Nick-rc7il
    @Nick-rc7il ปีที่แล้ว +1

    Does it matter if it’s an 01 or a 101 for a new screen?

  • @danielrolon56
    @danielrolon56 ปีที่แล้ว

    Do you recommend any battery upgrades?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      IMO all the batteries for the SP are relatively the same. I use this here amzn.to/3KRHOGt

  • @JomasterTheSecond
    @JomasterTheSecond 7 หลายเดือนก่อน

    Those aren't Tri-Wings.

  • @pres002
    @pres002 9 หลายเดือนก่อน +1

    lol SP's are so fun to mod you just are being over exaggerating

  • @kimtritran8746
    @kimtritran8746 ปีที่แล้ว

    Hi there! What is that little mesh circle that goes over the speaker called? I'm trying to find a white one for my mod but I'm not sure how or where to search for it!

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      I’m not sure what it’s called and I haven’t heard of anyone selling any that are different colors :/ all I really know is that it’s meant to protect the speaker from getting dirt in it

    • @kimtritran8746
      @kimtritran8746 ปีที่แล้ว

      @@JakeSimmons I appreciate the response! I'll see what I can find! (:

  • @sticasst
    @sticasst ปีที่แล้ว

    I did the mode with retro repair shop and my screen keeps freezing do you know why and how I can fix it?

  • @oxlaeg399
    @oxlaeg399 ปีที่แล้ว

    Hey,
    I did the Mod, but my GBA SP is freezing the game after like 10-15 Minutes. Does anyone have a fix?
    It happens with diffrent Games and i also tried a new Battery :/

  • @Dronetothetop
    @Dronetothetop 8 หลายเดือนก่อน

    Could've been much better video if you show us how it runs actually.

  • @LPalmTree
    @LPalmTree 11 หลายเดือนก่อน

    So which gb is best to mod that covers them all?

  • @stedog9681
    @stedog9681 2 ปีที่แล้ว

    I accidentally put the screw through the ribbon cable and it still works is that normal?

  • @SonnoMaku
    @SonnoMaku ปีที่แล้ว

    Of course the kit I bought didn't come with the screwdrivers lol.

  • @chesterwong8985
    @chesterwong8985 8 หลายเดือนก่อน

    I have a gbasp my mom brought to me when I was child, there is some problem on the screen so I will not play that one, should I try and learn to mod it? (0% experience)

    • @chesterwong8985
      @chesterwong8985 8 หลายเดือนก่อน

      In addition, If I want to keep my old gbasp as it is, how and where can I buy the motherboard and other accessories?

  • @NCA0896
    @NCA0896 ปีที่แล้ว

    Where did you get the white bezel for the screen?

  • @doctorpepper6178
    @doctorpepper6178 ปีที่แล้ว

    I remember it by saying white to the right

  • @811jdog
    @811jdog 2 ปีที่แล้ว

    Is there anything you can do about breaking the volume switch?

  • @pizzatime3335
    @pizzatime3335 ปีที่แล้ว

    Just tried to do this exact mod but I broke 1 of the tabs on each hinge 😭😭

  • @Stinky0368
    @Stinky0368 ปีที่แล้ว

    I have my dads original game boy SP and it looks perfect beside it two scratches on the hinge and the bottom, should i not mod mine? Forgot to mention it is the game boy when he had as a kid

    • @janke9913
      @janke9913 ปีที่แล้ว

      I'd try to get a second one to mod. That one probably carries a lot of sentimental value.

  • @fourthburrito4579
    @fourthburrito4579 2 ปีที่แล้ว

    I just did a shell swap on a 3DS. would you say the SP is easier, just as hard or worse than that?

    • @JakeSimmons
      @JakeSimmons  2 ปีที่แล้ว +1

      A lot easier than a 3ds lol

  • @TheMasterPoe
    @TheMasterPoe ปีที่แล้ว

    Jake I just finished my first mod with this ips screen and I still can’t adjust the brightness. Any ideas why?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      Did the brightness button work before? Also, you might want to go over your solder joints one more time just in case. Otherwise its hard to diagnose without seeing it or having more information

  • @JarvisWashingmachine
    @JarvisWashingmachine 2 ปีที่แล้ว

    I must have missed it. Why do you not clean the motherboard on an SP?

    • @JakeSimmons
      @JakeSimmons  2 ปีที่แล้ว +1

      Sorry I totally spaced it but it’s the main point in my video from last week, “Why SPs Suck.” TLDR any liquid with layered components like the tactile switches on the SP is not good for it

  • @pierreawad3880
    @pierreawad3880 2 ปีที่แล้ว

    Articule Cousin!

  • @14bqdonk
    @14bqdonk ปีที่แล้ว

    $200 is overkill

  • @SevenDeMagnus
    @SevenDeMagnus 2 หลายเดือนก่อน

    Cool

  • @yaqeen000
    @yaqeen000 2 ปีที่แล้ว +1

    Can you water cool a Gameboy?

  • @star43able
    @star43able ปีที่แล้ว

    whats the test cartridge?

  • @omarvelco
    @omarvelco ปีที่แล้ว

    Do you do N64 mods for sale?

  • @i.ate.the.batman
    @i.ate.the.batman ปีที่แล้ว

    If i send u my game boy sp will u mod it i really want a shell and brigther i am not begging just asking if u can i can send u it and when youre done send it back well only if u decide to say yes im to afraid to mod it im just a kid with no mod set😅i am getting pokemon emrald in like 30 days so u dont have to say yes but it would be nice😀

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว

      Unfortunately I don’t do a send in service but I am modding an SP on stream at noon pacific that I will sell. It’ll also have the ability to output to a TV!

    • @i.ate.the.batman
      @i.ate.the.batman ปีที่แล้ว

      @@JakeSimmons ok i will try to fix it myself no worries😅

  • @boulbot2925
    @boulbot2925 ปีที่แล้ว

    someone have the link for the screen please ?

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      In the description

    • @boulbot2925
      @boulbot2925 ปีที่แล้ว

      @@JakeSimmons the two amazon links redirect to the shells for the gameboy advance SP but not the screen that goes with it :/
      ty for the answer !

  • @leoguardado13
    @leoguardado13 ปีที่แล้ว

    He says roll the intro but he’s the one that does it 😂😂😂😂

    • @JakeSimmons
      @JakeSimmons  ปีที่แล้ว +1

      No I hired someone that’s only job is to roll the intro…😂

    • @leoguardado13
      @leoguardado13 ปีที่แล้ว

      @@JakeSimmons right….😂😂😂😂

  • @joeoak7090
    @joeoak7090 6 หลายเดือนก่อน

    I did everything and now my light button doesn't work 😞

  • @joeoak7090
    @joeoak7090 6 หลายเดือนก่อน

    I DONT THINK THE AGS 101 WORKS WITH THE SEE THOUGH SHELL IM WATCHING THE VIDEO AGAIN BUT I THINK YOU HAVE A NORMAL 001

  • @joeoak7090
    @joeoak7090 6 หลายเดือนก่อน

    BRO YOU NEVER CHECKED THE LIGHT BUTTON 🤔🧐

    • @paramkore1101
      @paramkore1101 3 หลายเดือนก่อน

      He checked it when he turned it on