Good to see the CAT back in action! Love the channel and thanks for the hat also! :D If you ever see any of the Brown's in town, tell them Jake said G'day haha.
Got my hat today thanks Matt...all best for harvest...I enjoy your work, along with a few Nrth USA channels...I'm a Kiwozi, enjoy seeing contrasts in weather and dirt between countries
Great job lads ! bit of luck it’ll be a dream harvest lots of drone shots so we can sit back and watch you hard at work 😂 Jd might even have a camera with him this year 😂😂😂all the best from Tassie
That drone reminds me of the chopper mustering except of course your not going up and down and around and around like loonatic. You would think that they use it to muster today you would probably not have to leave the big house❤😂🎉😢😮😅😊
Just put a light bar on the roof of the cabin and good to go, sure would love to come and help, as a lad in Tasmania we all helped each other with the harvest. Mainly hay bailing or shearing but we made sure it all got done as a community should.
I’m still a diehard Rigid industries fan. Once you’ve seen how bright and well patterned they really are it’s hard to buy the cheap stuff. A 40” dual row dual pattern spot/driving bar will turn night into day.
Tiger lights makes led lights that replace the ones in the hood. Not sure if they sell to Australia or not. I believe they are the same as the ford new holland genesis tractors
Is that a barley crop? Looks a bit light but we don’t see all of it? 10 -12 bags maybe? 3/4 tonne /ha? Bit hard doing the drone estimate. On the cat, Might be worthroughing the inside of the crack and putting a fibreglass patch on while it is clean, drill a small hole in each end because the vibration might cause it to run. It would only take a few minutes. Plastic headlights can be cleaned with brasso to remove scratches but the plastic might be brittle.
Well done on getting the challenger back in service, I’m sure I’m not the only one who has fingers crossed that it doesn’t play up on you during harvest. Hoping you have a great harvest, hopefully uneventful… thanks again for posting.
As always great video again thanks Matt. Looking forward to seeing how the harvest turns out. Can I ask why you where lifting the back of the challenger up with the big fork. What was going on there?
Good job again but sometimes I wish to have an old fashioned bonnet that would have been more easy to work around fhe engine with it's related accessories instead of the new one piece bonnet!
Can you tell me about the aftermarket precleaner your set up on the CR? We run a weed mill and I have to clean the air filter twice a day. A precleaner might make life easier
Point five of the Australian constitution states you entitled to a fair price for your product . I Pray for your safety , for your heath and against fires and flood , Rejoice in Jesus name . Amen
Guess you know Warren, Western truck and tractor repairs . youtube. He did engine swap on a Challenger, reco from Cat. Road test new engine loose camshaft, trailered back to workshop. Whole thing was messy. Good luck with yours and the harvest, enjoy your stuff, play on.
If you mean the video series from a couple of years ago that was a JD 9620t. it was on it's 3rd reman engine (plus original) by the time Warren saw the back of it.
Drone shots of harvest with the music you play hits you right in the feels.
Well done boys...feeding the world..
Nice to know it's still a goer. Thanks
I always envisioned Bradley's family car as a mini-van with some boy racer rims and a fart pipe exhaust with a chrome tip on it
Good to see the CAT back in action! Love the channel and thanks for the hat also! :D If you ever see any of the Brown's in town, tell them Jake said G'day haha.
Cheers mate!
Got my hat today thanks Matt...all best for harvest...I enjoy your work, along with a few Nrth USA channels...I'm a Kiwozi, enjoy seeing contrasts in weather and dirt between countries
Awesome! Cheers😁
All the best with harvest team
Good morning from Texas
Morning!
Great prep work. All the best with harvest.
Best of luck with harvest
Great to see the Challenger up to a harvest season 🤞🏻👍🏻🏴
All the best for harvest guys. Hope breakdowns are minimal this year
Good luck with harvest boys.
I'm glad Brad knows where he stands with the Jeep. Good to see the harvest has started shouldn't be any bogged Headers this year
Come on Matt, all the time that tractor has been sitting there, um ya could'a done your lights properly 😂😂. Great video again
😂😂
Can't wait for this harvest for you guys😊!
thank you guys for keeping us fed. as always enjoy watching what ever is going on , on the Farm. Happy Harvest season :)
You'll be up to your eyeballs in it by now guys. I hope all the weeks of prep are paying off and nothing too serious goes bang!
Going well so far👍😁
Great content. Good luck with harvest hope it's a good yield
Here's wishing you folks a bountiful harvest.
Let's see how it all goes.
Thank you for sharing
🇺🇲💪🙏🤗
I think that those LED lights will light up the whole area ahead of you. Good luck with the harvest guys! Thanks for sharing. 😊
All systems go hope you guys have a great harvest cheers boys
Great job lads ! bit of luck it’ll be a dream harvest lots of drone shots so we can sit back and watch you hard at work 😂 Jd might even have a camera with him this year 😂😂😂all the best from Tassie
I got a new drone a couple days ago so hopefully I don’t disappoint👍😁
Would love to work there,great atmosphere and love the farm.
"5k for two lights" .......heavy equipment costs never cease to amaze me.
Good job guys
Good luck and have a GREAT harvest!
That drone reminds me of the chopper mustering except of course your not going up and down and around and around like loonatic. You would think that they use it to muster today you would probably not have to leave the big house❤😂🎉😢😮😅😊
The Challenger has been a bit of a challenge but you saw the light at the end, eventually.🙃 Great job as always fellas.🤎 The Ole Fella greg
Awesome teamwork
Nice work men , bugger about the bonnet but it could always be worse, be safe
Another awesome video guys.
From kiwi land.
Just put a light bar on the roof of the cabin and good to go, sure would love to come and help, as a lad in Tasmania we all helped each other with the harvest. Mainly hay bailing or shearing but we made sure it all got done as a community should.
I was a bit quick off the mark with my light bar comment.
U do a good job
I’m still a diehard Rigid industries fan. Once you’ve seen how bright and well patterned they really are it’s hard to buy the cheap stuff. A 40” dual row dual pattern spot/driving bar will turn night into day.
Surly CAT can send you a few sets of ute mudflaps and a new headlight to 'test' 🤔🤔
Yeah!
A local farmer once told me "when you think the crop is ready, you then go on holiday for two weeks"
Time to break in those new track's
Tiger lights makes led lights that replace the ones in the hood. Not sure if they sell to Australia or not. I believe they are the same as the ford new holland genesis tractors
I had checked them out and they are for the 55 challengers which were similar to the genesis series🤔
Is that a barley crop? Looks a bit light but we don’t see all of it? 10 -12 bags maybe? 3/4 tonne /ha? Bit hard doing the drone estimate. On the cat, Might be worthroughing the inside of the crack and putting a fibreglass patch on while it is clean, drill a small hole in each end because the vibration might cause it to run. It would only take a few minutes. Plastic headlights can be cleaned with brasso to remove scratches but the plastic might be brittle.
It’s a wheat crop, I must of forgot to mention it in the video👍 it was doing about 4t/ha 👍
Well done on getting the challenger back in service, I’m sure I’m not the only one who has fingers crossed that it doesn’t play up on you during harvest. Hoping you have a great harvest, hopefully uneventful… thanks again for posting.
As always great video again thanks Matt. Looking forward to seeing how the harvest turns out. Can I ask why you where lifting the back of the challenger up with the big fork. What was going on there?
Thanks! We were aligning the drive wheel for the tracks👍😁
Hey Matt love the videos how many acres do you farm
Currently farming about 2700hectares👍😁
Hey Matt how many tonnes of wheat can the hopper on the header hold. Great Video Mate
I think it’s nearly 11t standard and the big top ads another 2.5 I think👍😁
Good job again but sometimes I wish to have an old fashioned bonnet that would have been more easy to work around fhe engine with it's related accessories instead of the new one piece bonnet!
Can you tell me about the aftermarket precleaner your set up on the CR? We run a weed mill and I have to clean the air filter twice a day. A precleaner might make life easier
It’s a turbo 2 pre cleaner, seems to work well, just needs a bit of modification👍
Matt you’re beard needs a little maintenance.Good luck for the harvest
All the maintenance effort has gone to the machines😂
Hi Matt, what year is the Commer Maxiload i have seen in your videos and is she still in use please?
I can’t remember🤔 it still gets used fairly regularly at planting and harvest😁👍
Was that wheat or barley you had a nibble at there Matt ?
Wheat👍 must of forgot to say on the video😁
Point five of the Australian constitution states you entitled to a fair price for your product . I Pray for your safety , for your heath and against fires and flood , Rejoice in Jesus name . Amen
Put Mighty Car Mods to work for collaboration videos
Maybe if you didn't make Brad carry the heavy end of everything he might not of been so tired and not dropped that hood!
Guess you know Warren, Western truck and tractor repairs . youtube. He did engine swap on a Challenger, reco from Cat. Road test new engine loose camshaft, trailered back to workshop. Whole thing was messy. Good luck with yours and the harvest, enjoy your stuff, play on.
This is Australia mate !
No reman just good honest engine rebuild!😏
If you mean the video series from a couple of years ago that was a JD 9620t. it was on it's 3rd reman engine (plus original) by the time Warren saw the back of it.