You have to pull out the airbag module which is located under center console and send it off to safety restore or my airbags they hook it up and clear it so all the codes will be erased when you get the module back hook it back up but make sure to disconnect negative battery cable anytime dealing with airbag or air bag components and once module is hooked up and air bags have been replaced take a scanner and delete all the air bag codes
Sorry for my ignorance but does the horn get damaged when the airbag goes off? I got a salvage Malibu too. Will need to remove airbag as well. Do those 2 clips involve anything with the horn?
Dude shouldn’t be allowed to touch a vehicle. No clue how this air bag comes out … it’s very simple u just stick two screw drivers in the sides of the wheel and it pops out
I have been seeing some of your current videos on the malibu. My salvaged repaired malibu steering assist has stopped working. Do you know if after replacing the part, will i need some sort of dealer code reset? I have never had an electric steering issue.
Unfortunately I have not worked on those steering assist features yet. I would hate to tell you something wrong. I suggest you check with a Chevy Dealership. You can just call them and ask them over the phone. Hope this helps. Good Luck!
This might be a really great video you seem like you’re knowledgeable, but I am so nauseous from the camera moving around so much that I feel like I’m gonna throw up. 🤮
First way to fix it is to reset the Airbag Restraint module using a very expensive scan tool with a tablet screen such as Snap-On. That will clear the crash data codes and clear the airbag light. Second way or option is to replace the Airbag Restraint module with a new one that does not have crash data stored. Hope this helps, let me know how it goes. Thank you for watching!
There is 2 hole in steering wheel, all u have to do is push 2 little screw drivers in holes and air bag will pop out,
I was going to say that but you beat me to it lol
It's not easy as u think it is lol just put a screw driver in the holes and it will pop out lol
@@MisterIsf tell that to the ppl stealing the whole forkin column in under 15 seconds .
Thanks for video ( спасибо!)
I’m Russia 🇷🇺 it’s good car people like it make more videos about Malibu
at the minute 14:20 , You honked pressing the horn. Didn´t the battery terminal were already disconnected?
That's what I wanna know🤔
Don’t you have to replace the air bag module? Did the light go out?
Don't wanna you put other wires on new steering,will that trigger the airbag
How I can take off the airbag light on the dashboard?
Fix everything that’s deployed. Or if no airbags were deployed then get it diagnosed
The airbag light does not go away????
Were you able to start the car after the airbags deployed I have the same one in the car won't start now
You have another issue. Maybe fuel cutoff
Question after crash you have to replace the crash sensor to
You have to pull out the airbag module which is located under center console and send it off to safety restore or my airbags they hook it up and clear it so all the codes will be erased when you get the module back hook it back up but make sure to disconnect negative battery cable anytime dealing with airbag or air bag components and once module is hooked up and air bags have been replaced take a scanner and delete all the air bag codes
Excuse me sir can I do these methods with equinox car 2020
this would have been the best video if your camera did not move as much as it did. Still very good.
Sorry for my ignorance but does the horn get damaged when the airbag goes off? I got a salvage Malibu too. Will need to remove airbag as well. Do those 2 clips involve anything with the horn?
No they do not
Why is he working at night at a parking lot?😂😂😂
Where are you located? Need this done to my 2017 Malibu
Is this the same a 2017 buick envision?
Reemplazo la bolsa pero no la activas solo reemplazando. Creo que el trabajo esta incompleto.
Woooah. Can I have the emblem?
Dude shouldn’t be allowed to touch a vehicle. No clue how this air bag comes out … it’s very simple u just stick two screw drivers in the sides of the wheel and it pops out
Great sense of humor. Thank you.
I have been seeing some of your current videos on the malibu. My salvaged repaired malibu steering assist has stopped working. Do you know if after replacing the part, will i need some sort of dealer code reset? I have never had an electric steering issue.
Unfortunately I have not worked on those steering assist features yet. I would hate to tell you something wrong. I suggest you check with a Chevy Dealership. You can just call them and ask them over the phone. Hope this helps. Good Luck!
I changed my battery when that happened and it went away
This might be a really great video you seem like you’re knowledgeable, but I am so nauseous from the camera moving around so much that I feel like I’m gonna throw up. 🤮
Hello everyone, I had changed my steering control but my horn car isn't working 😔
But the air bag light still on
How can we fix that
First way to fix it is to reset the Airbag Restraint module using a very expensive scan tool with a tablet screen such as Snap-On. That will clear the crash data codes and clear the airbag light. Second way or option is to replace the Airbag Restraint module with a new one that does not have crash data stored. Hope this helps, let me know how it goes. Thank you for watching!
You can send the srs module to myairbag.com the will clear the codes for $35
It gone
@Killapanda47