Ball Valve Packing Gland
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Believe it or not, a ball valve packing gland does exist! Like its close cousins the gate valve and globe valve, you can pack a ball valve.
Although it may not be obvious at first glance, removing the lever handle will expose the ball valve packing gland. By removing the packing gland nut, you'll be able to pack the valve in the same manner as the gate or globe valve!
Regards & Happy Plumbing,
Bob
________________________________________________________________________________________________
My Amazon Storefront:
www.amazon.com...
Disclaimer:
My Videos are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The plumbing instruction used here is used to simply break down jobs into their simplest steps.
Please use a clear mind and use all safety precautions following the tutorials provided by this site. I do not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility for what you do with the information provided by this site.
Viewers must be aware by doing projects on their homes they are doing it at their own risk and Bob's Plumbing Videos cannot be held liable if they cause any damage to their homes.
With different codes around the world and constantly changing standards, regulations, and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Bob's Plumbing Videos cannot claim liability with all applicable laws, rules, codes, and regulations for a project. Be safe, have fun with your plumbing repairs, and ALWAYS stay informed with your local building code.
________________________________________________________________________________________________
*NOTE: This description above contains affiliate links that allow you to find the items mentioned in this video and support the channel at NO COST TO YOU. While this channel may earn minimal sums when the viewer uses the links, the viewer is in NO WAY obligated to use these links. Thank you for your support!
I had a plumber try to charge $750 for a valve replacement. Knowing that was BS, I found different plumber who told me to look up on youtube how to pack a valve. Thanks to the 2nd plumber and your video, I was able to fix this problem myself and at zero cost!
Just an FYI to folks here, avoid companies that simply take down your info and route your request to a subcontracted plumber. You'll get a cookie cutter solution at a higher price. The second plumber I called picked up himself and was managed by a crew he personally hires. They'll take jobs that's worth their time but help you out if it's something trivial and can be done yourself.
Thanks again
Thanks Bob! I repacked many valves in the Navy. First ball valve tonight. Great lesson for me.
Love the accent. Reminds me of my Dad teaching me everything I know about plumbing. But he cursed more.
Wow Glad you are back!! The story about your plumbing license is unbelievable, it seems that the bureaucracy in this world is increasing at an exponential rate!! would love to hear the whole story
Thanks Bob. I haven't had to add packing to a ball valve yet but good to have the knowledge in advance. Please do share the story about renewing your license with the city. The NYC bureaucracy can be crazy as we New Yorkers know.
greatest respect to NYC. plumber ,from connecticut ,,,out in the country handyman
Thank you very much for your video. I installed a brand new ball valve and water was slowly coming from that nut. Being brand new I did not re pack it but it used your information to tighten it correctly and now the leak stopped. Thanks again!
Excellent!
Glad to have you back Bob! I’d love to hear about the BS!
Bob, I'm glad they finally moved their lazy butts and got you squared away. It sucks this happened to you my friend. I always enjoy all your videos and it's a pleasure to learn from a true master. Thank you.
Thank You my friend! Regards, Bob
Thank you! This helps me a lot. And thankful I don't need to buy a whole new valve!
I'd love to see a video of your dilemma. Thanks for your great videos!
Great to see you back! Honestly, you had me worried. Happy to see that all is well.
Very articulate explanation. Thank you
Glad it was helpful!
Bob, nice to see you back!
Than you sir👍
This technique works excellent!
Great to hear!
Thanks for posting !
Saved me $140 from a plumber. Thanks sir!!
Excellent!
Great to see you back! Make the video!
Finally! lol thanks brother , couldn’t find this anywhere.
Glad I could help
I only use graphite packing. Hello Bob new to the channel it’s good to see another old school plumber like myself. Even though I’m a younger old school plumber 56 see my comment in you lead closet bend video
Thanks 👍
Bob, so mad that you had to put up with the dog poop from the local government employees. Glad to hear you got it sorted out. Always look forward to your videos.
Thank you👍
Thank you
You're welcome
Always love your videos. Of course you should tell the story.
Thanks for the video😎😍😎
Thanks!
Welcome!
I maintain process equipment and fully rebuild 3 piece balls valves. Rewarding to do, sometimes the ball or body actually degrade and need to be fully replaced, but nice to replace a few orings and guides instead of whole body.
Wondering if you have seen the issue im having. My handle turns to off and on but the water does not shut off.
Edit: mine did not have a locking washer. I was worried over nothing, ha! Also: I used a crescent wrench to not chew the nut up.
I appreciate you! Just wanted to know if anything would jump out if I take the handle off - you warned me about the locking washer. Thank you. Up against a wall and taking the handle off will work much better (twisting on a threaded brass ball valve, handle rubbing against wall).
uh-oh seems line the lock nut was cross-threaded on the stem when putting it back...
It happens!
What, no “coffee money” during the pandemic?
Why do you use pliers on all the nuts? I use fixed opening wrenches (box end, crowfoot or even open end).
Habit, quick, easy. On chrome I do use open end adjustable!
Thanks saved me a service call from the plumber
Excellent!
Glad you're back!
I love to hear stories of idiotic bureaucracy at its finest.
Six months to re-new a trade license is shameful! Common sense does not exist amongst the city work force, but I got their attention!
Hey Bob, glad to see you back! 👍. Does that teflon expand as you tighten the packing nut?
Yes it does, thanks for commenting!
Do you need to make sure the packing makes a full wrap? There was a small gap in yours. Does that get taken up while tightening?
It'll make up when you tighten it!
I just bought a brand new 3/4 ball valve (Everbilt- store brand) from Home Depot I was going to use for my house main shtoff and it doesn't have a packing nut! As a matter of fact NONE of the ball valves of that brand have packing nuts. Would you return it? Why no packing nut? Thanks!!
Some of them use internal "O" ring gaskets, I wouldn't have a issue with that.
Unreal the total BS this state does to just honest hard working people. A t every level. City county Albany makes no different. They are literally chasing the producing class out of here. It's insane. Do the video Bob. The hell with them. The more exposure the better. It will only get better when people, regular people push back. Keep he faith man. Love your work.
Very much appreciated! Thank you!
What about if I put plumbers putty. Will that work as well? Thanks
No, graphite or Teflon!
I HAVE A QUARTER TURN OR Ball Valve WITH A LEAK FROM LEFT AND RIGHT NOTCH AND TV RED KNOB HANDLE WOBBLES; IS THERE A Packing Gland BEHIND KNOB?
Feel free to send me a photo. E-mail to info@robertsessaplumbing.com. I'll take a look.
I have this ball valve, my issue is I need to some fixtures in the house but the shut off does not shut off the water, it turns as if its off but the water still flowes. How can I repair a ball that doesnt turn even though the handle does?
Replace it, if the stem disengages from the ball and it's not in synch with the handle time for a new valve.
Hi bob my ball valve is leaking at the body not valve handle. The only way to fix is replace. Cannot turn body because it soldered. I did take off handle but no secondary nut for packing ?
If it's joint soldered, best have it replaced by a pro! Unless of course you're up for the challenge.
Thanks bob for responding . No packing nut unbelievable Yes I can replace Thanks keep on making info videos.
hi Bob, I also have a ball valve on my boiler that has started to drip water suddenly from the stem, I took off the handle to tighten up the packing nut and lo and behold there is no packing nut. There is only a thin nylon washer under the handle, whatlooks like a packing nut is round with no flats to put a wrench on. The boiler is fairly new and a high end model made by Bosch, the installers used the copper clamping system to assemble all the fittings. A slick setup but I don't have access to the tools needed to replace the fitting and I probably wouldn't try myself anyway. Have you ever seen a valve like that and am I missing something?
I cut it out and replaced
May be it was a cheap valve
And
Valves are crazy in cost $$$
Thanks Biden
Yes make the video please
Hi, how you do ball valves that does not have packing nut on the outside?
If it's leaking thru the stem and you have no packing nut, I would just replace the valve. It most likely has an "O" ring inside that need to be replaced. You might have a hard time hunting the correct replacement down.
@@BobsPlumbingVideos yeah, makes sense. Thanks
Water sprays out even though ball valve is in of position
I meant off position
Are most of the new valves o-rings or do they still make them with packing like this?
I find many imported valves have "O" rings. I always try to buy domestic if they're available.
Does sweating a ball valve makes it easier to leak at the pack?
Not in my experience, as long as you're not using an oversized torch head / tip.
@@BobsPlumbingVideos thanks!
hi Bob, I also have a ball valve on my boiler that has started to drip water suddenly from the stem, I took off the handle to tighten up the packing nut and lo and behold there is no packing nut. There is only a thin nylon washer under the handle, whatlooks like a packing nut is round with no flats to put a wrench on. The boiler is fairly new and a high end model made by Bosch, the installers used the copper clamping system to assemble all the fittings. A slick setup but I don't have access to the tools needed to replace the fitting and I probably wouldn't try myself anyway. Have you ever seen a valve like that and am I missing something?
Send me a photo! info@robertserssaplumbing.com
Hi Bob trying to send you a picture but can't figure out how.
I just bought a 3/4 ball valve from Home Depot. And none of the Everbilt (HD store brand) have packing nuts. Why? That's crazy. What did you figure out? Thanks so much.
What would you do if ball valve starts leaking at the handle and there is no packing nut ?
I would replace the valve!
So ive blown out my outside water and sprinklers out for winter .and problem im having is i leave my outside fracet open its all blown out and i have a small drip drip timy put my front fracet even though the ball valve is off to the outside would you say my ball valve nylon set is bad or has small debris .is it very common. I tryed to open shut a bunch i think it made it worst now it drips little more out front fracet even thou its shut off and blow out . Should i just have someone replace valve it looks like newer valve too i thought ball valves never go bad but .just would like your opinion
The balls don't go bad, but if that nylon seat becomes compromised or debris gets between the ball and seat it'll pass water. You may be better served by having the valve replaced for long term reliability.
Thx I'm having the same problem!
Update I've replace valve myself and what do you know no more dripping. My old valve had a bunch of rust inand around seal so I'm sure it tore into nylon seal just enuff to let water by. Thanks for your help bob.good luck matt
Apollo 3/4" ball valve does not hold when handle is perpendicular. Can I rebuild that valve? Are ball valves rebuild able?
Don't waste your time ,replace it!
Hi Bob, Getting ready to replace a very slow leak on a ball valve. One question, I plan on leaving the main water on, can I repack it with the water slowly leaking out or do I need to turn off the main? Thank You...
If it's just leaking slowly, it shouldn't be a problem. I do it quite often, but if you're in doubt shut the main.
Well, I chickened out and called a plumber. There was no way to turn off the water if I ran into a problem other than turning off the main supply to my home. I did not want to be with out any water. The plumber did the exact same thing you showed in your wonderful video. Cost for a service call is now $175. I feel so bad, he had no issues and I am out $175 Oh well live and learn.
Hi Bob won't let me send you pics
Going to your info @site but keeps failing
I just sent myself a series of pictures from my phone, working fine?
@@BobsPlumbingVideos how do I do that?
Keeps telling me email address is invalid
Got it to go by using your gmail address
👍🏻
Welcome back! NYC buracracy will get you worse than COVID ever will!
What does child support form have to do with renewing your plumbing license?
If you pay child support, they will hassle you to renew your license so you can't work and then can't pay your child support.
Just one more way government "serves" you.
Beats the shit out of me? Plus a full medical exam to prove I'm able to perform my duties as a plumber! (Maybe!)
Do you own a wrench? I was taught DO NOT USE CHANEL LOCKS.
That's what wrenches are for and they don't chew up the nut.
You're a funny Guy...😂😂😂
Thank you