Hi guys, Chris from Sheffield here! It was great to meet you both. Thank you so much for your time and I’m glad you liked the gift. I really appreciate mine thank you. Give Esther top marks for the beach recommendations too!
I agree with you on the talk about the tail of the dragon. My car is good to go but I wish I had a way to trailer it down. I still plan on making it and stopping by for a t-shirt. Maybe one of these years I’ll make it down with my car.
Journey to 100k subscribers! You and me both. Let's do it! See you in October. The squeak in my clutch pedal wasn't the master/slave cylinder. Swapped them out and it's still there. Must be inside the bell housing.
@@LHTPerformance I already did that when I replaced it. I was hoping that was it since it had a lot of old dried grease on it. It’s probably the throw out bearing. It gets super sticky sometimes. Going to wait until after the trip to fix it. No time to pull it and put back together before the trip.
I was just in today for a filter and wrench. I forgot to ask you what the part # for button clips that hold the under motor splash guards up are for the CRX. Wish I could make it to the Dragon, but I am attending a retirement celebration in CT the same weekend.
As far as I'm concerned, you can no longer buy any advertised "oem" sensors from ebay or amazon. Same goes for things like spark plugs..everything has been knocked off at this point, unfortunately.
Sad to be honest years back I use to order a lot through my ebay for oem sensors and was lucky to get genuine parts but good to know that way if I ever do need on the future . Thanks again
If you make a double cup holder for the S2000, that will get you 1,000,000 subscribers. I am wondering if the cup holder bracket will have "posts" or hooks so the S2000 bag can be attached over the bracket. It's nice when all the options or attachments can be used together without being forced to choose either bag or cup holder.
@@LHTPerformance I heard that if a car doesn't have dual cup holders that can handle 2 "Big Gulps" then it isn't an American cup holder. But a cup holder that works with the bag and doesn't require buying an expensive adapter, now you're just showing off.
@@aerynlovell4754 we’re limited how much weight we can hang off the cup holder. It’s only mounted on 2 small screws. Plus, it’s definitely not an American car. lol.
How were you able to determine whether or not it was fake? I recently bought a denso maf sensor for my 07 civic si from rock auto and my oem MAF label looked significantly different from the new replacement. I thought maybe it was just due to it being the original oem one from 2006 vs a current one? Based on my o2 reader (connected to my app on my phone), the new one appears to have a more steady afr reading than my nearly 20 year old one.
I bought six Honda factory laser iridium spark plugs off of eBay. The electrodes burnt up and fell off in to my combustion chamber. I hate to say it but go to the dealer and pay the damn price nowadays 🤷
@@LHTPerformance Really anal about what goes into my car. Did a side-by-side comparison of the spark plugs before installation and they were absolutely spot on knockoffs. Contacted eBay to tell them what was going on and they wanted nothing to do with it. My fault for buying car parts off of eBay.
Hi guys, Chris from Sheffield here! It was great to meet you both. Thank you so much for your time and I’m glad you liked the gift. I really appreciate mine thank you. Give Esther top marks for the beach recommendations too!
Hi guys, Chris from Sheffield here! It was great to meet you both. Thank you so much for your time and I’m glad you liked the gift. I really appreciate mine thank you. Give Esther top marks for the beach recommendations too!
@@ChristopherH-h8o Awesome Chris ! Thanks for coming by and the gift. Glad you enjoyed the beach !
Another Chris from Sheffield here! I have an fk8 and love the channel!
@@christiandimelow3899 Hey Chris , another Englishman 👍🏻
I agree with you on the talk about the tail of the dragon. My car is good to go but I wish I had a way to trailer it down. I still plan on making it and stopping by for a t-shirt. Maybe one of these years I’ll make it down with my car.
John, let's not forget Sheffield's fine cutlery (kitchen knives) and car springs☺
Yep. Sheffield steel. I visited there during my apprenticeship
@@LHTPerformance I sourced new springs for my Miata made there☺
I'm also a member of S2KUK, my key sits proudly on the same keyring 👍.
Real Talk John
LHT does allot of cool stuff for Hondas
I have a design for a cup holder that I 3d printed . Works great for long trips and it has a quick remove when not needed
Another great video
@ 6:17 is where it hits. 😮💨🙏
Journey to 100k subscribers! You and me both. Let's do it! See you in October. The squeak in my clutch pedal wasn't the master/slave cylinder. Swapped them out and it's still there. Must be inside the bell housing.
@@crxseth Try to grease the ball on the slave cylinder before dropping the trans. Fingers crossed that’s it.
@@LHTPerformance I already did that when I replaced it. I was hoping that was it since it had a lot of old dried grease on it. It’s probably the throw out bearing. It gets super sticky sometimes. Going to wait until after the trip to fix it. No time to pull it and put back together before the trip.
I was just in today for a filter and wrench. I forgot to ask you what the part # for button clips that hold the under motor splash guards up are for the CRX. Wish I could make it to the Dragon, but I am attending a retirement celebration in CT the same weekend.
@@SFLET-up9ll I don’t have the clip part number. That would take some searching
Not one but two ads to start... Good job 😅
You should watch the video instead of the ads😅
As far as I'm concerned, you can no longer buy any advertised "oem" sensors from ebay or amazon. Same goes for things like spark plugs..everything has been knocked off at this point, unfortunately.
Bought one on Ebay (30€) and it was the same as this one. I looks slightly off, but only fine details are different. It's really sad.
Sad to be honest years back I use to order a lot through my ebay for oem sensors and was lucky to get genuine parts but good to know that way if I ever do need on the future . Thanks again
If you make a double cup holder for the S2000, that will get you 1,000,000 subscribers. I am wondering if the cup holder bracket will have "posts" or hooks so the S2000 bag can be attached over the bracket. It's nice when all the options or attachments can be used together without being forced to choose either bag or cup holder.
@@aerynlovell4754 Lol. No double cup holder. No one wants to be a passenger in an S2000.
We’ll make sure it works in conjunction with the LHT Bags.
@@LHTPerformance I heard that if a car doesn't have dual cup holders that can handle 2 "Big Gulps" then it isn't an American cup holder. But a cup holder that works with the bag and doesn't require buying an expensive adapter, now you're just showing off.
@@aerynlovell4754 we’re limited how much weight we can hang off the cup holder. It’s only mounted on 2 small screws. Plus, it’s definitely not an American car. lol.
Wasn't it Def Leppard that came from Sheffield or was it John Nowill & Sons Ltd?😅
I would like to buy the trunk bag
How were you able to determine whether or not it was fake? I recently bought a denso maf sensor for my 07 civic si from rock auto and my oem MAF label looked significantly different from the new replacement. I thought maybe it was just due to it being the original oem one from 2006 vs a current one?
Based on my o2 reader (connected to my app on my phone), the new one appears to have a more steady afr reading than my nearly 20 year old one.
I bought six Honda factory laser iridium spark plugs off of eBay. The electrodes burnt up and fell off in to my combustion chamber. I hate to say it but go to the dealer and pay the damn price nowadays 🤷
@@MyBrothersKeeper101 Yep. It’s getting bad. Had a customer that told me the same thing.
@@LHTPerformance Really anal about what goes into my car. Did a side-by-side comparison of the spark plugs before installation and they were absolutely spot on knockoffs. Contacted eBay to tell them what was going on and they wanted nothing to do with it. My fault for buying car parts off of eBay.
@@MyBrothersKeeper101 That really sucks. Some knock offs are fine if there failure doesn’t cause damage. But spark plugs will ruin an engine.
@@LHTPerformance RIP Valve seats
What is this accent Finnish? 🤔
@@ttt69420 I was born in England.
Hi guys, Chris from Sheffield here! It was great to meet you both. Thank you so much for your time and I’m glad you liked the gift. I really appreciate mine thank you. Give Esther top marks for the beach recommendations too!