That’s so cool life that’s you found a couple of purpose built racecars at your junkyard! We don’t see something like that too often up here! Can’t wait to see what you’ll do with this!
Some free advice for anyone looking to set your vehicle up as a tow rig... go to uhaul and get your receiver mount there, no ones got anything on the prices for their equipment!
Lead the way forward, my Brother! You are SO on point! You got the whole time travel deal down to a science, you're jumping days, not just minutes or hours, you got this! The 'Separation Spatula' for the glass is Trick, gold from my brother's brain! I love where this whole project is going, and how it's getting there! BST is BACK!
Glad to see you got your MoJo Back! Dang, that's a lot of work... But I have faith that your plans for the new Stang build will be Off the Hook Crazy Cool :)
Gotta say I like these S197 Mustangs. They're reasonably priced, handle better than any other Mustang before the S550, light enough to throw them around, and relatively simple. Only downside is the 3v engine, though the last couple of years came with Gen1 Coyote.
YES! I have to agree with you... these are the better Mustang in looks and everything ( except ) that 3 valve... So will will have to figure that one out
@@dominicanadrenaline7708 really? you cars just do that to ya... I thought it was a good look ( the Only mustang ) that looks traditional front to back... The engine is the issue ( they should had stuck a 4v in them ) We are eying up a v6 also... i have to check the junkyard for parts
You jumped in with both feet into the Mustangs. It should be a pretty cool project. I only wish the Mustang with the cage was savable. It had a cool history and would be a good conversation piece at a car show. You always do amazing work so this should be good.
Well its just logical from 9 money stand point ) cut some of the cost , but it will be more deeply ( harder to do ) If i get a good slow pace it will be fine.. The key i figure is touch the car ( daily ) even 30 mins it should be done with less effort ( less over load of a feeling )
I thank you for this brother! I am just happy to ( be ) .. we tend to forget the simple things of life.. Just to be able to video tape is a blessing... With this project It feels good ( even though ) it hard to do.. Trust me i am not comfy doing this , but I think this is growth I am feeling... Thank you so much for the comment... I am grateful to even view this..
I thank you ( strokeup) we are not even began yet... Once the cage is cut out ( it begins ) right now its a strong thought... We have 2 Mustangs to get so this will be cool...
I like these S197's just don't care for the 3 valve engine. I hope you stay away from those. Nice choice otherwise!! Can't wait to see how it rurns out!!!👍👍👍
have no fear. A 3v will not be in there! ( super hero voice )... Ihey brother how are you holding up?.. I hope thing are ok enough to deal...How is you daughter doing? How is you mental ? I had to make switch cause things where leading me down this path of the Mustang..The coolest part is that My Nephew is going to build one...So it makes so much better to me... I will use Vic stuff to make it happen..2v or 4v or even 5.42v to many options honestly so ... the hardest part will be the wiring...
@@bstfordchannel923 my daughter and I are doing well for the most part. We have a good family to support us. My mental health is up and down. I still have break downs but I'm starting to have more good days than bad. Thank you so much for your continued concern 🙏🙏🙏 It really helps me!!
@@coreyrowe2052 i always I have a deep concern for you and yours brother.. You are toughest guy i know right now ( A UFC Fighter ) has zero on you bro..The Mental is where the truth lies.. keep that as clear as possible .. A lot of pray and we shall pray for you and your daughter..
@@bstfordchannel923 I really appreciate it! Prayer is key to what has kept me going!!! God is the main source of my peace, so the more prayer, the better 🙏🙏🙏
I hope you and the family are doing well brother!! Great video as always!
That’s so cool life that’s you found a couple of purpose built racecars at your junkyard! We don’t see something like that too often up here! Can’t wait to see what you’ll do with this!
Let alone an s197!! I have yet to see one of those at a junkyard near me!
Some free advice for anyone looking to set your vehicle up as a tow rig... go to uhaul and get your receiver mount there, no ones got anything on the prices for their equipment!
Lead the way forward, my Brother!
You are SO on point!
You got the whole time travel deal down to a science, you're jumping days, not just minutes or hours, you got this!
The 'Separation Spatula' for the glass is Trick, gold from my brother's brain!
I love where this whole project is going, and how it's getting there!
BST is BACK!
Glad to see you got your MoJo Back! Dang, that's a lot of work... But I have faith that your plans for the new Stang build will be Off the Hook Crazy Cool :)
Gotta say I like these S197 Mustangs. They're reasonably priced, handle better than any other Mustang before the S550, light enough to throw them around, and relatively simple. Only downside is the 3v engine, though the last couple of years came with Gen1 Coyote.
YES! I have to agree with you... these are the better Mustang in looks and everything ( except ) that 3 valve... So will will have to figure that one out
I never liked the body style then my wife got one (it’s just a v6) but it started growing on me now we got plans for it
@@dominicanadrenaline7708 really? you cars just do that to ya... I thought it was a good look ( the Only mustang ) that looks traditional front to back... The engine is the issue ( they should had stuck a 4v in them ) We are eying up a v6 also... i have to check the junkyard for parts
You jumped in with both feet into the Mustangs. It should be a pretty cool project. I only wish the Mustang with the cage was savable. It had a cool history and would be a good conversation piece at a car show. You always do amazing work so this should be good.
I second this comment. I wish the car was half terrific, or l wish BST repaired the Mustang.
That's a great idea brother!!!!
Well its just logical from 9 money stand point ) cut some of the cost , but it will be more deeply ( harder to do ) If i get a good slow pace it will be fine.. The key i figure is touch the car ( daily ) even 30 mins it should be done with less effort ( less over load of a feeling )
I always love your enthusiasm. Sometimes these old fixer-uppers beat us down but you have a good way of staying positive. Thanks for the videos!
I thank you for this brother! I am just happy to ( be ) .. we tend to forget the simple things of life.. Just to be able to video tape is a blessing... With this project It feels good ( even though ) it hard to do.. Trust me i am not comfy doing this , but I think this is growth I am feeling... Thank you so much for the comment... I am grateful to even view this..
Great progress! Much luck with the Project!!
I thank you ( strokeup) we are not even began yet... Once the cage is cut out ( it begins ) right now its a strong thought... We have 2 Mustangs to get so this will be cool...
I like these S197's just don't care for the 3 valve engine. I hope you stay away from those. Nice choice otherwise!! Can't wait to see how it rurns out!!!👍👍👍
have no fear. A 3v will not be in there! ( super hero voice )... Ihey brother how are you holding up?.. I hope thing are ok enough to deal...How is you daughter doing? How is you mental ?
I had to make switch cause things where leading me down this path of the Mustang..The coolest part is that My Nephew is going to build one...So it makes so much better to me... I will use Vic stuff to make it happen..2v or 4v or even 5.42v to many options honestly so ... the hardest part will be the wiring...
@@bstfordchannel923 my daughter and I are doing well for the most part. We have a good family to support us.
My mental health is up and down. I still have break downs but I'm starting to have more good days than bad.
Thank you so much for your continued concern 🙏🙏🙏
It really helps me!!
@@coreyrowe2052 i always I have a deep concern for you and yours brother.. You are toughest guy i know right now ( A UFC Fighter ) has zero on you bro..The Mental is where the truth lies.. keep that as clear as possible .. A lot of pray and we shall pray for you and your daughter..
@@bstfordchannel923 I really appreciate it! Prayer is key to what has kept me going!!! God is the main source of my peace, so the more prayer, the better 🙏🙏🙏
@@coreyrowe2052 anytime my friend....I do care brother...
I can fully embrace this choice BST.
I thank you for this brother... the support is needed and welcomed
Great Idea! I'm off to the Junk Yard!
lmao yes brother.. check out your local yard and see what they have... Sometimes ( I am sure you know ) its a hit or miss with parts....
The junk yard will provide!!!!
yes brother I have ( get parts and build things that in the yards ) it makes it fun...
Finally a Mustang project!!! S197 let's go
you and i both wanted to do one lmao.. I am here learning a lot.... I am ready bro!
@@bstfordchannel923 I really do want to buy one of these S197 and build it, one day I will. Good luck with the project.
Can i buy that vic body when you're done with it lol
no title big bro
Promo SM