Ezra, you are absolutely my favorite truck related TH-camr. No arrogance, no ego, no super trucker nonsense, just a a well rounded and knowledgeable person. Thanks for all the knowledge you give away and the great content. Stay safe brother
RUS Leningrad День добрый дружище . Всю мою жизнь нам говорили что Американцы народ ленивый. После просмотра видео я понял что нет. Люди как люди. лично я поехал бы на шиномонтаж . Спасибо за видео. Здоровья тебе и семье.
It's the speed my friend. At 70-80 mph at 80000lbs when the tire slams on a piece of metal on the road it just has to go through. I've driven my semi on construction sites and seen millions of nails, bolts and scrap. Never once had a problem, I just make sure to check that none of them are stuck before I get back on the road. But smallest fucking pieces of metal were able to go through at high speeds. Luckily they just slowly went flat. Never had a steer tire explode, only happened twice on trailer tires. Still not pleasant, but I've seen what happens when a steer tire explodes, it's nasty.
Очень люблю Амереканские траки! У нас в России много траков США они возят тяжелые грузы.но их становится менше они стареют а новые не льзя возить дорогие пошлины. Ваши траки самые классные классики!
I never ever lose interest in your videos Ezra, always look forward to the next one, you are an inspiration, I learn something off every one of them. Regards from Manchester UK.
Enjoy watching. You do it same as I do. Nice to watch trucker do his own work. Most owner operators don’t even know how to put air in tires. Always carry long air hose in truck that hooks to glad hand. Love your shows hard working man. Cujos to you my friend. Always learn stuff watching you. Not all the drama like a lot of trucking utubers. That gets old quick. Don’t make any changes. Love your videos. Love that new cat engine. Even though had cummins since 1978. Still do. Take care.
Those guys ain’t owner operators they’re glorified steering wheel holders with huge overhead and bad business sense. They’ll all go away here soon when the stock market goes to shit and rates drop.
Good video as usual Ez. And like the old guy that i used to drive for use to say with air leaks from tires(tyres) and air lines. No bubbles.....no troubles! Cheers from Sydney Australia. 🇦🇺🐨🦘🇦🇺🇺🇸🇺🇸
This is why I always back up a little before pulling forward out of a parking spot. People are assholes and they don’t want to see someone else have nice things.
Ur next patch u should put it so the arrows point to the beads there's little belts in the patch that should run the same way as the belt plys in the tire I like to jam a plug in the hole to keep water and dirt from rusting out the steel belts
Great video as always Ezra. The most interesting things I've seen go through a trailing axle tire..... a spark plug and an open end wrench. Safe truckin' always my friend !
What a clever man. Total respect for all you’re knowledge bro. I wish I had half of it. And a decent human good luck mate keep em coming. Regards from south London England 🏴
I bought one of those dismount bars when I had my truck and trailers to do my tire work and it worked great. It was a a lot faster than the two tire irons. I guess if you just do one it's not a big deal, but when you do all twelve on a trailer it was nice to have. Also I didn't realize it was called stitching when you roll the patch. I guess I done it wrong all this time. 😂😂
Many years ago whe I first left school 1986 my first job was in a tyre shop and I fixed many a lorry tyre like this I remember fixing one and as I inflated the tyre I heard a creaking noise and a big buldge appeared in the side wall I shit it and ran it was at about 90 lbs and then a big bang when I returned it had blown itself across the workshop a d had a big hole in the side wall then after a few seconds all the light tubes in the workshop started to fail till I was in the dark .
Just wondering I usually after cleaning up with the flapp disk.. wipe it off with some brake clean then put down the cement works good is this wrong do u think thks ..
I love the fact that you show how to "shade tree" all these different kinds of things, yet still bother to show actually putting proper torque to the wheel nuts..
Ezra the bad ass! No bulshit. no I’m perfect better than anyone crap. Just doing what he does. Shocked you don’t have a million followers. Love all your vids. I must say ole red looking phenomenal
Good morning Ezra, Hey, next time you head out with a load... how about putting a go pro on your trailer, so we can see Red in action and hear the kitty? Doesn't have to be the whole video. Maybe just a 5 min clip or something. Just a suggestion. 8^)
sometimes it is very satisfying doing tire work. i put the cement on both parts. i figured it was kind of like contact cement and bonded when each side contacted each other with the absents of air....like you, i doubt it matters. nice to see you again.
I prefer the dawn dish soap n water. I tend to use a lot of it. Works great and is check. I think by keeping the bead wet and slippery, I have a better chance of not damaging the tire bead.
Ezrider359 great video as always. I've learned a lot from your videos. What tool set is that in the black case? Looks like a good set for keeping in the truck.
Patch-plug combination "these are a pain to use." Yes I definitely have to agree I've used a lot of them and they suck you have to make a hole in the tire and then sit there FOREVER and rub this thin pice of plastic until it comes off and it sucks I will keep that in mind and use the other things next time I patch a tire thanks!
It is ALWAYS the inside tire. Textbook repair... One little caution and that is I noticed you running your bare hand around the tire bead to apply soap. I got a nasty cut from something imbedded in the tire doing that once so use gloves.
That's the way I always did it jump in there and make it happen! Don't stand around in a golf shirt and blue sunglasses telling everyone else how to do it!
Ezra, you are absolutely my favorite truck related TH-camr. No arrogance, no ego, no super trucker nonsense, just a a well rounded and knowledgeable person. Thanks for all the knowledge you give away and the great content. Stay safe brother
Thank you
Agree 100% this man is worth his weight in gold. Please keep the great content coming.
Ditto, always enjoy.
Absolutely 👍 💯
RUS Leningrad День добрый дружище . Всю мою жизнь нам говорили что Американцы народ ленивый. После просмотра видео я понял что нет. Люди как люди. лично я поехал бы на шиномонтаж . Спасибо за видео. Здоровья тебе и семье.
Always had a lot of respect for tire guys, especially doing them out on the side of the road at night it crappy weather.
Hey buddy hope you are doing great good to see ole red again
I’m always amazed how hard it is to make holes in a tire when you want to but the rustiest piece of wire or nail will find a way
It's the speed my friend. At 70-80 mph at 80000lbs when the tire slams on a piece of metal on the road it just has to go through. I've driven my semi on construction sites and seen millions of nails, bolts and scrap. Never once had a problem, I just make sure to check that none of them are stuck before I get back on the road. But smallest fucking pieces of metal were able to go through at high speeds. Luckily they just slowly went flat. Never had a steer tire explode, only happened twice on trailer tires. Still not pleasant, but I've seen what happens when a steer tire explodes, it's nasty.
“Hanging out with my left sock today” haha!
Очень люблю Амереканские траки! У нас в России много траков США они возят тяжелые грузы.но их становится менше они стареют а новые не льзя возить дорогие пошлины. Ваши траки самые классные классики!
Watching you do that makes my knees hurt. If I had a dollar for ever tire I’ve done that to….
Please be kind. Lol!! Sounds like you take a lot of grief. Need more of your old mans music, good videos.
Tire shop is going to like the way the arrow was facing on the patch!
Love your old school work ethic!!! not a lazy bone in your body....RESPECT!!!
You're a bad ass mechanic man! Str8 to the point!
I never ever lose interest in your videos Ezra, always look forward to the next one, you are an inspiration, I learn something off every one of them. Regards from Manchester UK.
Nice job on the flat repair. The guys comments about being a good TH-camr is so on the mark! Amazing in all you do!
I have dug rocks out of the tread that have chewed down to the belts. Anybody else seen this? Nice job on the tire!
Hello from Russia 👍👍👍
Love your videos - safety glasses - nice touch!!!!
As always I love to watch your show and enjoy all the tips and bits and I'll catch ya on the next one looking forward.
Enjoy watching. You do it same as I do. Nice to watch trucker do his own work. Most owner operators don’t even know how to put air in tires. Always carry long air hose in truck that hooks to glad hand. Love your shows hard working man. Cujos to you my friend. Always learn stuff watching you. Not all the drama like a lot of trucking utubers. That gets old quick. Don’t make any changes. Love your videos. Love that new cat engine. Even though had cummins since 1978. Still do. Take care.
Those guys ain’t owner operators they’re glorified steering wheel holders with huge overhead and bad business sense. They’ll all go away here soon when the stock market goes to shit and rates drop.
Good video as usual Ez.
And like the old guy that i used to drive for use to say with air leaks from tires(tyres) and air lines.
No bubbles.....no troubles!
Cheers from Sydney Australia.
🇦🇺🐨🦘🇦🇺🇺🇸🇺🇸
That was a great video. I have to say you are one hard working American. It’s truly an honor to be your countryman.
The mystery of the left sock may never be known .
Excellent video. I worked in the tyre trade for a few years. The arrows on those patches are meant to point at the beads of the tyre.
If ever the zombie apocolypse happens, I want this guy on my side.
Arrows go bead to bead. Been in the tire service industry for 30 years.
You are correct
Good video's 👍🙏 shot out from Chicago
That is the way I have been taught to do this as well.
This is why I always back up a little before pulling forward out of a parking spot. People are assholes and they don’t want to see someone else have nice things.
Ur next patch u should put it so the arrows point to the beads there's little belts in the patch that should run the same way as the belt plys in the tire I like to jam a plug in the hole to keep water and dirt from rusting out the steel belts
Great video as always Ezra. The most interesting things I've seen go through a trailing axle tire..... a spark plug and an open end wrench. Safe truckin' always my friend !
Love seeing that yellow engine under your hood. Like Mr Natural always says keep on truckin
You make it look so easy Ezra! Tire repaired and back on the trailer in under 9 minutes.
Outstanding job!
Real simple explanation right to the point and all well done !👌 and im always learning ,,,thanks for the great videos!👍
Great video. Thanks!
Good job getting it patched up. Everyone’s got their own methods to getting it done as long as it holds air.
Great job Ezra , have a great weekend too
Good job again ez, like your work buddy waiting on the next one
Love that truck looking good every time I see it buddy.
Good job 👏 👍
Great vid as usual! I spy an OBS Ford
Obs isn't mine
@@Ezrider359 I didn’t think it was but it was distracting me haha.
HOW'S YOUR CAT HOLDING UP ...
GOOD WE HOPE... BESAFE OUT THERE ...
AN THXS ...
Ezra I always enjoy your videos and that can do spirit
Thanks for the content...!!!!
What a clever man. Total respect for all you’re knowledge bro. I wish I had half of it. And a decent human good luck mate keep em coming. Regards from south London England 🏴
I bought one of those dismount bars when I had my truck and trailers to do my tire work and it worked great. It was a a lot faster than the two tire irons. I guess if you just do one it's not a big deal, but when you do all twelve on a trailer it was nice to have. Also I didn't realize it was called stitching when you roll the patch. I guess I done it wrong all this time. 😂😂
Nice job 👍 I’ve done a few myself back in the day
the best trucking tuber to learns from Ezy does it !!
Been working hard, eh? Old Red looking dirty!!!
great job ! I've fixed 1000's truck tires ! i couldn't have made a vid showing how simple a tire is !! Great vid !!!
Nice one Ezra good video thanks again for your time and consideration top job
Old school....... very very good sir ! Have a great week stay safe....!
Another success story episode brought to you by the one and only EZ!
Thanks so much and Have A Great Day!!! I always like you sharing everything!!!
Thanks for the video Ezra, watched a lot of tires get fixes at the truck stops, there not as fast as you.😁
Man I like your video brother learn a lot
Man brother you do that like a pro quick and fast, your friend from Larned Ks, Eric Houser be safe bro
Many years ago whe I first left school 1986 my first job was in a tyre shop and I fixed many a lorry tyre like this I remember fixing one and as I inflated the tyre I heard a creaking noise and a big buldge appeared in the side wall I shit it and ran it was at about 90 lbs and then a big bang when I returned it had blown itself across the workshop a d had a big hole in the side wall then after a few seconds all the light tubes in the workshop started to fail till I was in the dark .
Ezra. You make fixing a flat look easy. I have a back problem. I would never try that.
You make it look easy
Awesome Job As usual EZ You made that look too easy Looking forward to the next video keep up the good work brother👍👍
I bet that b models running gooood
I saw your proper burnishing tool, its right by that 10mm socket with your sock.
Just wondering I usually after cleaning up with the flapp disk.. wipe it off with some brake clean then put down the cement works good is this wrong do u think thks ..
Sir you are a beauty. My go to help me through channel
looks like You and Big Red have been working hard...hope it has been profitable..peace and health..
I love this channel! You just get sh!t done!
Such a cool fellow
Yes sir cool stuff 👍
I love the fact that you show how to "shade tree" all these different kinds of things, yet still bother to show actually putting proper torque to the wheel nuts..
Ezra the bad ass! No bulshit. no I’m perfect better than anyone crap. Just doing what he does. Shocked you don’t have a million followers. Love all your vids. I must say ole red looking phenomenal
Tu eres mi héroe en los camiones no hay problema que lo puedas resolver Dios te bendiga
Mr Ezra cool video. Thanks for sharing and stay safe
Thank you. I don't think iv seen a video from you come up in my feed for a while. I should probably go check I probably have some catching up to do 👌
Another good video
Good job BRO!No garbaje tire --OK.
Morning cofffees on!! Cheers !;-)!!!!
Nice job with the fix Ezra! 🙂👍 I hope things are going well. Take care
Thanks 👍
Good morning Ezra,
Hey, next time you head out with a load... how about putting a go pro on your trailer, so we can see Red in action and hear the kitty? Doesn't have to be the whole video. Maybe just a 5 min clip or something. Just a suggestion. 8^)
You made that look super easy, even though I know that it isn't.
Use some brake clean and a scrapper to smooth the area out a but then put cement. Worked wonders when I would repair tires at my old job
sometimes it is very satisfying doing tire work. i put the cement on both parts. i figured it was kind of like contact cement and bonded when each side contacted each other with the absents of air....like you, i doubt it matters. nice to see you again.
Not much that's more annoying than having to drag out a air hose in the morning to air up a tire.
To each their own. To quote #@RON PRATT " there is a bunch of ways to reach 10".
ARROWS TO BEADS!!! Always
What’s that tool box under your side step? That looks neat and helpful for on the go
I prefer the dawn dish soap n water. I tend to use a lot of it. Works great and is check. I think by keeping the bead wet and slippery, I have a better chance of not damaging the tire bead.
Ezrider359 great video as always. I've learned a lot from your videos. What tool set is that in the black case? Looks like a good set for keeping in the truck.
Perfect
That was an excellent repair, my question is, how does your tire filler upper line, stay on the valve stem ? 🤔👍👍💚🚛
In my entire 40 years on this rock I have never heard of putting glue on the patch
Nice job Ezra! Quick too, I always wanted to get those Cat’s Eye things but they’re a little pricey aren’t they?
Patch-plug combination "these are a pain to use." Yes I definitely have to agree I've used a lot of them and they suck you have to make a hole in the tire and then sit there FOREVER and rub this thin pice of plastic until it comes off and it sucks I will keep that in mind and use the other things next time I patch a tire thanks!
Is it weird, that I waited to get a cup a coffee to watch this? lol
Hey whatever works as long as your safe and the tire holds air
Just wondering, big tires like that, do you balance them? Thanks from.St. Paul Minnesota.
You make mount and dismount look pretty easy I guess they are much easier if it hasn't been years since they were off
They have been on there probably around a year maybe year and a half. They were mounted when I did the frame stretch
It is ALWAYS the inside tire. Textbook repair... One little caution and that is I noticed you running your bare hand around the tire bead to apply soap. I got a nasty cut from something imbedded in the tire doing that once so use gloves.
And just like that......👍👍
👍👍
What happened to hot patches ?
That's the way I always did it jump in there and make it happen! Don't stand around in a golf shirt and blue sunglasses telling everyone else how to do it!