Thank you for showing it up close and explaining it. I wanna build a lowrider but nobody on TH-cam or on the media showing how they build theirs :( Badass build though !
Another Masterpiece Carnal, Looks Great.... Ready to take on the streets. The Lock Up Looks MEAN AF too... Damn it !! Great work, Attention to Detail.... Craftsmanship. Keep them coming and Keep the Videos rolling. Thanks for sharing the insights and tips of what to get done. 😎👍🏽
Nothing like a fresh cut car, another great job bro! Are those uppers 1.5” or 2” extended? Also seems like the powerballs with the long C-Channel is not only good for reinforcement, but also better for distributing pressure throughout the axle oppose to welding it straight to the middle of the axle.
Nice work g ...I have a question di the back wheels dint hit the skirt side ? I have same car and I'm having that issue I'm from Virginia I bought the car donw on Tennessee and can't find someone here make it work just trying to fins out if you did something to the axel like make it short or some
I'm ready 4 the same She's Violent 😂 set up. I got 1981 cadillac fleetwood brougham d'elegance. I need info to get at U... .. Santa Ana California... .. The Big O.C
Nice bro is that just the bmh caddy long arm kit for rear and telescopic shaft do you sell that kit if so how much once again you got down again bro love that lock up I need a set for my caddy or g body what size strokes again in rear them front arms look good too are they 1.5 or 2 thanks again big homie
Yes sir Black Magic Long Arm Kit. I personally did not want to install the kit I wanted to build my own shit. But customer wanted it so that's what that hoe got 🤣 I do not stock those kits. Comp motors Solenoids Switches Dumps Fittings Hoses Return hoses Pistons Cups Etc In stock ready to ship. PayPal for payment
Love your work bro,I'm building a civic with 1 gate n 4 batteries I have a couple questions that I like to ask you if that's OK with you? Thanks in advance...
I'm just curious as I don't know much about hydraulics but why use one pump for the front and two for the rear of the front weighs more. Wouldn't 2 pumps be better for the front? Just curious thank you..
I am still learning but here goes - To three wheel from a static positon you raise the front, then one rear. If you only have one pump on the rear - you have to lift the front, then the rear, then dump one rear corner. Depending on weight distribution, it may not even collapse that rear corner unless you turn and drive. If you have two separate rear pumps you have more control over the sequence you can use.
I'm the Black Magic Distributor for Kern County I have the kits in stock for installation. Installation takes around 6 to 9 weeks from pickup, towing, dropped off. This project right here took me 10 weeks, in the 10 weeks I took 1 week off to be with family & get threw Christmas. Exact work time on this one was 8 weeks completed, I try to give real time frames that way people know what's up. Everything is supplied by me . Kits, Batteries, electrical, hardware, oil, metal, specialty metals, cnc, brake lines, extended brake lines, brake fluid, under coatings, paint, bushings, ball joints, uniballs, lug nuts, fuel lines, clamps, Etc Only 15 different companies I use to build a No Limit Setup 🤣 Real Talk
@No Limit Fabrication We Lowriding Est.2007 thats cool man. Would you do a car from out of town? I'm on the east coast. If you dont mind me asking, what's a rough estimate of cost for idk let's say a 3 pump setup on a 63 impala 4 door? I'm just trying to gather as my info as I can. Thanks for the response also. I really appreciate that you took the time to respond
17k to 23k and that's not profit. There is a lot of material & equipment I use to make all this happen. 80% deposit at pickup 20% at drop off Towing included for California Out of State homies we have to figure out a number for transportation
Another Masterpiece ! No Limit is Master of the Pop Lock Warriors 💯 Come on !
Thank You 💪💪💪
Loving that 3 pump 10 battery set up, great content
@@solotha4289 thank you highly appreciated 👍👍👍
Thank you for showing it up close and explaining it. I wanna build a lowrider but nobody on TH-cam or on the media showing how they build theirs :( Badass build though !
This business is a word of mouth ! You do quality work your job will speak volumes for recommendations your way. Good job homie !
3:59...welcome to "Ground Central Station"
Clean as always homie
Mahalo🤙🏽
Finally someone sprung for a Square. Looking like it's ready to take flight.
Yes sir. This one definitely didn't come from the 99 cent store 🤣hahahah
Beautiful!!..and the walk around is the cherry on top bro👏👏
Attention to detail is awesome 👍
Good morning 🌄 from New Zealand 🇳🇿
Get well bro
Shit I'm trying. It's been a crazy year. Gots to keep pushing forward my family relies on me. 💪💪💪💪👌
Dam comin out with that straight fire 🔥🔥🔥✌
Thank You Highly appreciated 👍👍👍
Bad ass work bro nice n clean
On my 81 Fleetwood I had 4 pumps 2 piston to the nose and 16 batteries
I had 4 pumps 2 pistons & 12 batteries in my 66. I'm in Vegas too bro
Love when people cut their cars and take the time to do it right
Another Masterpiece Carnal, Looks Great.... Ready to take on the streets. The Lock Up Looks MEAN AF too... Damn it !! Great work, Attention to Detail.... Craftsmanship. Keep them coming and Keep the Videos rolling. Thanks for sharing the insights and tips of what to get done. 😎👍🏽
Thank You Much Appreciated. Until the Wheels Fall Off 💪💯
You a bad boy I love your work " Let's do it"
Beautiful work.....
Badass work big dog ....no limit c'mon!!!!
How much does a set up like that cost with parts and labor and reinforcements on same kinda car? Just a estate would be fin?
“That Cadillac, don’t do it”!!!
" The Repeat Offender" 🤣 This homie right here has had multiple rides done by me. He be on that Juicy Juice hahahahah
@@nolimitfabricationwelowrid159 You did a great job on that Cadillac. I wish you continued success.
Be proud homies
Not a Cadillac fan but this one and everything done to it does go hard respetos.
Nice work my bro! Very nice work!
Dope ride, great job guys.
Bro you always rip it up brotha💪🏽 hope you get better brotha sucks to be sick ese
Thank You much respect 💯
You feeling better brotha?
You all be proud, much love here.!
Luxor makes a lock for a hub ?? Please tell me more! My caddy always losing the right side wheels on China's
" Outstanding "Yep-Yep.
Nothing like a fresh cut car, another great job bro! Are those uppers 1.5” or 2” extended? Also seems like the powerballs with the long C-Channel is not only good for reinforcement, but also better for distributing pressure throughout the axle oppose to welding it straight to the middle of the axle.
Thank You. They are 2" tuck on the big dog uniballs so it will look more like a 1.5" tuck because there is more degree you get from the uniball
Oh rale chingo ese el. Mr. Olguin 🇲🇽👍👍😎
This is dedication frl💯💯🎓🎓
Dang.homie.u the best who eva did it.and got away wit it
Nice work g ...I have a question di the back wheels dint hit the skirt side ? I have same car and I'm having that issue I'm from Virginia I bought the car donw on Tennessee and can't find someone here make it work just trying to fins out if you did something to the axel like make it short or some
I don't like it I love it!!!!!
👌👍✌️👊💯
Thank You. Badass comment 💯 💪
Mad skills bro
Clean homie !! Good demo 👊🏾💯
Damn nice bro!!
Thank You. 20 mock ups later but she coochie 🤣🤣🤣
How much for a set up like that
Close to 2 yellow bands 💵💵💵💵💵
@@nolimitfabricationwelowrid159 so what $20,000
Is that 20k
2k if google is right 😅
I'm ready 4 the same
She's Violent 😂 set up.
I got 1981 cadillac fleetwood brougham d'elegance.
I need info to get at U... ..
Santa Ana California... ..
The Big O.C
I love these videos. Does this guy have a shop or website we can check out?
Súper clean !!!!!
What’s a part number for a Gbody break line
Longer …for telescopic?
Thanks for info
Well done….💯
I don’t know shit about hydraulics but I can tell this is some well done shit now I want to get into the hobby 😬 DONT DO IT 🤣
That shit is on 🔥🔥🔥🔥🔥
Thank You. Until the wheels fall off lol 💪
Looking Clean how much this run
Sick or not, still grinding!
Thank You. I got mouths to feed and mortgages to pay 💯. 👍
Nice bro is that just the bmh caddy long arm kit for rear and telescopic shaft do you sell that kit if so how much once again you got down again bro love that lock up I need a set for my caddy or g body what size strokes again in rear them front arms look good too are they 1.5 or 2 thanks again big homie
Yes sir Black Magic Long Arm Kit. I personally did not want to install the kit I wanted to build my own shit. But customer wanted it so that's what that hoe got 🤣 I do not stock those kits.
Comp motors
Solenoids
Switches
Dumps
Fittings
Hoses
Return hoses
Pistons
Cups
Etc
In stock ready to ship. PayPal for payment
1.5" tuck
He said don’t do it. 👊🏼🤙🏼
How much would you charge for something like that on a exatly same car?
$21,750
80% at pickup
20% at drop off
California towing included
Clean homie
Love your work bro,I'm building a civic with 1 gate n 4 batteries I have a couple questions that I like to ask you if that's OK with you? Thanks in advance...
Reverse cylinders are king. Don't go any bigger then a 10" cylinder
@@nolimitfabricationwelowrid159 I'm running 10s in rear n 8s in front how you think that will be. I have accumulators instead of springs also?
I like this 🎉props homeboy!❤
what does something like that cost>>??
Who distributes the 5100psi hoses? ?
Clean install.
What was the overall cost for this build
I got a93 fleetwood just got the long arm kit how do you find the point to weld in the lower brackets
How much torque could the driveline handle?
What kind of batteries are those I can't find them. Lmk thanks bro.
Where are you located
How much for a setup like this bro ??? If my Caddy is cut already 2 pumps ,8 batteries I just wanna upgrade
Aye perro if my caddi not hitting 3 wheel with 14s could it be my seals in my gear pump
Real good work bro,what city are you located in?
I'm out of Bakersfield Ca
@@nolimitfabricationwelowrid159 whats this setup cost ballpark. And do you do reinforcements ?
Yea man, we’re are y’all located
Aw man clean ass caddy
I like the 1993 fleetwood model better but the older Deville is clean also
I'm just curious as I don't know much about hydraulics but why use one pump for the front and two for the rear of the front weighs more. Wouldn't 2 pumps be better for the front? Just curious thank you..
I am still learning but here goes - To three wheel from a static positon you raise the front, then one rear. If you only have one pump on the rear - you have to lift the front, then the rear, then dump one rear corner. Depending on weight distribution, it may not even collapse that rear corner unless you turn and drive. If you have two separate rear pumps you have more control over the sequence you can use.
17:43 I died laughing the sound he made 😭
Hey I have a question, so you said it takes 10 weeks, so do you order all of the parts or do the customer?
I'm the Black Magic Distributor for Kern County I have the kits in stock for installation. Installation takes around 6 to 9 weeks from pickup, towing, dropped off. This project right here took me 10 weeks, in the 10 weeks I took 1 week off to be with family & get threw Christmas. Exact work time on this one was 8 weeks completed, I try to give real time frames that way people know what's up. Everything is supplied by me .
Kits, Batteries, electrical, hardware, oil, metal, specialty metals, cnc, brake lines, extended brake lines, brake fluid, under coatings, paint, bushings, ball joints, uniballs, lug nuts, fuel lines, clamps, Etc
Only 15 different companies I use to build a No Limit Setup 🤣 Real Talk
@No Limit Fabrication We Lowriding Est.2007 thats cool man. Would you do a car from out of town? I'm on the east coast. If you dont mind me asking, what's a rough estimate of cost for idk let's say a 3 pump setup on a 63 impala 4 door? I'm just trying to gather as my info as I can. Thanks for the response also. I really appreciate that you took the time to respond
wicked bro
clean setup
💯
How much for the car
Very nice
Do you sale the reinforced kit for this car Im in Vegas
How many coils are on the front thanks
How many inches could this setup do?
So much heat! 🤟
Rear telescopic cylinders 12" - 24" or 14" - 26"?
16" to 30" big dog shit 🤣🤣🤣
Ooohhhh sh***t. Dope. I have 14"-26".
How much you charge for this? How long it take?
This is probably $5-6k
How much $$$
How much would a setup like this go for anyone know ?
Great vid
GD!!! Lowrider for vida
My dude be killing me😂😂😂 don’t do it😂😂😂
If I wanna high lock up with 14s in the back ..will drop mounts be enough and adjustable uppers? I have a G-Body
High lockup is with telescopics. 14" cylinders is street - factory location
@@nolimitfabricationwelowrid159 gracias
You near Pismo Beach California?
Bakersfield CA
10 weeks... what's the price$$?
45k full built
That's shit KLEANNNN!!!!!!🔥🔥🔥🔥
Awsum job...
how much does this cost?
How much for that dump adex
how come u don’t got chains bro
Bro how can i wire 10 batteries
are you from tampa
@@MarioMyers-q7i no sir im from the Coast.
Santa Maria California 805.
I do all my work and run business in Bakersfield California
“Got my neighbors drivin by like a hoe”😂😂😂
Mane damn
Pimpin Ain't Eazy 🤣🤣🤣🤣🤣 Thank You for comment
Dope as f$$ck
Where are you located at?
⚡️⚡️
@1:07
😂😂😂😂😂😂
Yup , that guys .......
🤣🤣🤣🤣🤣😂😂😂😂😂😂
CustomGrow420 into lowriders now? 😂😂😂
🤩🔥🔥🔥🔥🔥🔥🔥🔥🔥🤩
How much do you charge to build a car like this
17k to 23k and that's not profit. There is a lot of material & equipment I use to make all this happen.
80% deposit at pickup
20% at drop off
Towing included for California
Out of State homies we have to figure out a number for transportation
Great work. Like good ish. But between the come ons and don’t do it’s and ohh La La have to mute ya.