How to Replace Front Strut & Spring Assemblies 2010-2015 Lexus RX350

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install new front strut & spring assembles from TRQ on your 2010-2015 Lexus RX350. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• 22mm Wrench
• 10mm Socket 1aau.to/obir/1A...
• 12mm Socket 1aau.to/obDn/1A...
• 14mm Socket 1aau.to/obDn/1A...
• 17mm Socket 1aau.to/obDn/1A...
• 21mm Socket 1aau.to/oamG/1A...
• 22mm Socket 1aau.to/opD/1AX...
• 30mm Socket
• Locking Pliers 1aau.to/omr/1AX...
• 1/2 Inch Impact Gun 1aau.to/ouV/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obHo/1A...
• Torque Wrench 1aau.to/oaLw/1A...
• Gloves 1aau.to/oakx/1A...
• Safety Glasses 1aau.to/oadr/1A...
• Floor Jack 1aau.to/oaaT/1A...
• Jack Stands 1aau.to/oXZ/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Thizz2011]

Why do you have to remove the axle nut?

[@Derpherppington]

These are quick struts using pre assembled Chinese springs.

[@glen30-kx5st]

I think that impact wrench already torqued those top nuts to more than 63 ft lbs.

[@enricoderojassarson5596]

What about replacement of the sway bar bushing?

[@btk_hassen3034]

Did this earlier for 5 hours and 1.5 for allignment

[@mikeytappe]

These aren’t OEM. From my understanding Toyota does not sell a pre assembled strut and the process for replacement is more complicated. These will not give you that smooth buttery ride like an OEM part according to many reviews.