Вариант с ЛУТ намного быстрее и дешевле для плат с СМД или с выводными элементами и двухслойные тоже можно делать. Я бы не стал вытравливать плату рядом с ноутбуком..
It is a fiber laser which are expensive. That is the cheaper one. The ultra is over $3000.00. You can do the same think with a cheap diode laser though.
This is totally Waste of money Just print your curcuit on A4 photo paper in just =$0.2 Don’t need this expensive printer of these kinds of pcb stuff Eaching process will be same for this printer and that process
How does just printing "your circuit on A4 photo paper" achieve the same thing - I assume you mean special photo etch film that has to be put on the copper, exposed, washed and then etched. I've done that, and it's always been a bit hit-and-miss. And you'd do that if you didn't have a laser - and if you did buy a laser for PCB work, the F1 wouldn't be it. But I DO have an F1 laser and I've been looking at a way to make simple PCBs quickly and without hit and miss exposures etc.
Когда-то обходились обычным лазерным принтером и утюгом😄
Вариант с ЛУТ намного быстрее и дешевле для плат с СМД или с выводными элементами и двухслойные тоже можно делать. Я бы не стал вытравливать плату рядом с ноутбуком..
Плата простейшая, а процесс сложный. Сделайте плату под SMD элементы, если сможете.
Beau travail, mais très compliqué, le but serai de se passer de l'acide pour la gravure .
Насыпь тонер. Так в 100 раз быстрее и дешевле.
Hi, is it possible to use Atomstack Atom 10 pro laser engraver or do I have to use xTool F1 laser engraver? Thanks.
Of course you can use any available laser machine.
Цікава ідея. Але скільки коштує прилад (за такий примітив такі гроші). Добавимо матеріали та час.
Воно того не варто
hi are you fom morocco ?
1500€ for that...?!!
It is a fiber laser which are expensive. That is the cheaper one. The ultra is over $3000.00. You can do the same think with a cheap diode laser though.
the same can be done with a brush and nail polish taken from your wife
This is totally Waste of money
Just print your curcuit on A4 photo paper in just =$0.2
Don’t need this expensive printer of these kinds of pcb stuff
Eaching process will be same for this printer and that process
How does just printing "your circuit on A4 photo paper" achieve the same thing - I assume you mean special photo etch film that has to be put on the copper, exposed, washed and then etched.
I've done that, and it's always been a bit hit-and-miss. And you'd do that if you didn't have a laser - and if you did buy a laser for PCB work, the F1 wouldn't be it.
But I DO have an F1 laser and I've been looking at a way to make simple PCBs quickly and without hit and miss exposures etc.
Офигенно все понятно
Лучше вместо музыки рассказали
Normally with a fiber laser you can directly remove the cooper. Your process look more complicated than needed.
Hi, congrats great vid, excuse me where did you buy the yellow machine to shake the pcb while issueing with acid?
You can make it yourself. Watch this video through this link
th-cam.com/video/qWHQB7yoJYM/w-d-xo.htmlsi=8XAMQuvX1udB6Nqr
@@inventorkr1 thanks a bunch, you've got yourself a New susbscriber
Thank you so much for subscribing! Your support means a lot to me, and I can't wait to share more with you!
3:43 - ALWAYS use gloves when handling chemicals.
Better be safe than sorry! A mistake can cost you...
Thanks for the advice.
👋👍❤️❤️❤️👍👋
I don't know whether to laugh at the stupidity of what I saw, or to cry, for the same reason.
محتوى جميل
Bulshit 😂😂 JLCPCB forever
Why 😂😂😂😂