Fully agree ...perfect speed of explanation. Request a long video explaining each parameter available on the reader. Awesome....keepmit up👍👍👍👍👍😊😊😊😊🙏🙏🙏🙏🙏
Best waste of $50 on a toy ever! I like how you still had me going to buy it for a dumb swapped car because it's cheaper than a coolant gauge and I like the coolant temp alarm feature.
Iv only just found this gauge and had made and fitted the other 3 gauges for water temp oil temp oil pressure. And now this one for my rx8 See how close the measurements are
This is our company's product, very happy to see that users can display and share our products, thank you very much, interested friends can follow our facebook homepage "facebook.com/autool.net/", there will be promotions and product recommendations.
It can display MAP (manifold absolute pressure) IF supported by the car's ECU. However even if it is, it may not be the cut and clear "X psi of boost" that most people would be expecting. Most cars that do support MAP readout will read it in psia (absolute), meaning 14.7psi is atmospheric and for example at 10psi of boost, MAP will read as 24.7psia.
Great video! Do you have the manual of this gauge? We are thinking of buying some for our cars, but we dont know if displayed data can be easily configurated Regards!
Hey Brian, nice video, I watched it before buying my X60 few months ago. Mine is working very well, I’m using it on my 09 Toyota Yaris Sedan mostly for fuel consumption, voltage and coolant temp (Yaris don’t have coolant temp. Gauge) except that I realized the the upper “shit” light has never worked. Is there a specific way to activate that function. Thanks
Bought one for my 2001 Volvo S60, I plugged it in and it doesn’t seem to be giving me any feedback, I just have a red X across from majority of the menu, and the numbers that do show up aren’t actual readings (for example fuel consumption says 999MPG, and oil temp says 32°F) Is there anything I can do to set it up? I was hoping to have this thing work for me out of the box.
As long as it's a standard OBDII port it will. A 97 Camry is just standard ISO9141 so yes. The only cars I have not had it work with are JDM vehicles as their OBDII protocol (JOBD) is slightly different.
Hi Brian. My odometer just stopped working. Does the Trip Distance and Distance on this actually work ? I mean is the Distance added up all the time giving you the total distance travelled by the car ? Thanks mate.
some of them have speed adjustments on them. so for example if you are going 50mph and it shows you going 54, you go through the menu to adjust it. i believe this unit is one of them
Great device..... however, the supplied "manual" is both too small, and has confusing language as to all the functions it can do....obviously written in English by a person whose first language is not English ( naturally),.....and has some quirky text. Unit obviously has much greater capability than I can invoke or understand from the provided paperwork.
It can display MAP (manifold absolute pressure) IF supported by the car's ECU. However even if it is, it may not be the cut and clear "X psi of boost" that most people would be expecting. Most cars that do support MAP readout will read it in psia (absolute), meaning 14.7psi is atmospheric and for example at 10psi of boost, MAP will read as 24.7psia.
There are multiple comments about this device failing to connect but the author of this video hasn't replied to any of those comments. If you don't know what the fix is just say you don't know instead of only replying to positive feedback comments.
Because I'm not able to diagnose connection issues over the internet, especially with every car. Unless you have a Mazda Protege as shown in the video, I can't comment on compatibility.
WARNING!!! Please do not buy this product before checking for car model compatibility, failed connection on 2 cars, system check light on for 1 other car. AUTOOL must publish compability list to buyers instead of requiring them to ask before purchase 👎🏻👎🏻👎🏻
You should do more videos. You have a good natural speaking voice and no annoying impediments.
Thanks!!
@@Ashquacks dude! Brian is right! i agree totally!!
Fully agree ...perfect speed of explanation.
Request a long video explaining each parameter available on the reader.
Awesome....keepmit up👍👍👍👍👍😊😊😊😊🙏🙏🙏🙏🙏
Brian, I agree. Do more videos. Great demeanor and speaking voice.
Best waste of $50 on a toy ever! I like how you still had me going to buy it for a dumb swapped car because it's cheaper than a coolant gauge and I like the coolant temp alarm feature.
Bought one for my Toyota Echo manual. Its a very basic car with no tach or any real info. This does the job great.
Thank you. You convinced me to buy this.
Iv only just found this gauge and had made and fitted the other 3 gauges for water temp oil temp oil pressure. And now this one for my rx8 See how close the measurements are
Is there a way to turn off the beeping sound that tells you when to shift?
Also, should it turn itself off when you shut the engine?
This is our company's product, very happy to see that users can display and share our products, thank you very much, interested friends can follow our facebook homepage "facebook.com/autool.net/", there will be promotions and product recommendations.
Hello, why does the device not turn off when the engine is turned off? The sleep mode is set to 30 seconds. Great wall hover h3 2.0 2014
I like the car I had a 03 black speed protégé sorry I got rid of it to get a TwinTurbo RX -7 that’s the only good thing..Does it read boost pressure
It can display MAP (manifold absolute pressure) IF supported by the car's ECU. However even if it is, it may not be the cut and clear "X psi of boost" that most people would be expecting. Most cars that do support MAP readout will read it in psia (absolute), meaning 14.7psi is atmospheric and for example at 10psi of boost, MAP will read as 24.7psia.
Nice video and explanation. I bought one. Could you please tell me how change miles to Kmts ? Also how to turn off the beep sound when you shift ?
wish I could fit this into a pillar mount
Great video!
Do you have the manual of this gauge? We are thinking of buying some for our cars, but we dont know if displayed data can be easily configurated
Regards!
Unfortunately I don't. I don't even think I read the manual haha, I'm somewhat technologically inclined so I figured it out pretty easily.
Thank you for watching this video. Please reach us at contact@autool.net if you have any question.
Does this show you remaining fuel level?
Hey Brian, nice video, I watched it before buying my X60 few months ago.
Mine is working very well, I’m using it on my 09 Toyota Yaris Sedan mostly for fuel consumption, voltage and coolant temp (Yaris don’t have coolant temp. Gauge) except that I realized the the upper “shit” light has never worked. Is there a specific way to activate that function.
Thanks
It only works on certain menus I believe. The way I have it set up, it does work the occasional time I rev up to near redline.
Is your car a right hand drive or left?
Hi. Is there a way to reset the avg fuel consumption to start measuring when I want without restore the entire equipment?
Thank you.
Hi, mini r53 connecting failed ?????
Can it display boost ?
Bravo, kiddo!
Did you have to calibrate your fuel consumption on the gauge? And if so, how did you do it so it would actually show accurate results.
In the settings it asks for engine size, cylinders, and gas or diesel.
nice review just ordered one.
Does it support all the protocols?
how do you change the color display ?
Will the gauge fit into a 2" pod that's on your pillar?
Mine does the annoying shift beep in 2nd at 30mph. How do I change that bc my 2nd gear goes to 60mph. It does it early for 3rd too
Hi, does the green color of the display is the only option available? Or can you change it?
The display color can be changed.
Does anyone know if it works in US miles/gallons/lbs for us Americans? I checked Amazon and it's not clear in the product description or reviews.
Did you find out if it does or not?
From what I've seen in various videos online it can display in both MPH and KMH, and both temp F and C.
Yes, you can change the units.
Any idea on how to mute it from beeping?
Bought one for my 2001 Volvo S60, I plugged it in and it doesn’t seem to be giving me any feedback, I just have a red X across from majority of the menu, and the numbers that do show up aren’t actual readings (for example fuel consumption says 999MPG, and oil temp says 32°F)
Is there anything I can do to set it up? I was hoping to have this thing work for me out of the box.
read the instructions in the manual it comes with. it says to remove certain pins that your car does not use.
i bought the same autool x60,. it always fail to connect,. wht do you think i need to do,. i follow the mnual instruction
did you fix ? mine is doing the same right now.
please let me know if anyone found a way to fix the connection
why the gauge always says connecting failed
Mine doesn’t work... says connection failed I need help on connecting it
You must turn the key and open lights or start up the engine
Mine I just got, same gauge, requires me to start the engine
You da man bros. How can I make sure it fits my car? I have a 97 Camry
It should work with any car with an obd2 port which your vehicle has
As long as it's a standard OBDII port it will. A 97 Camry is just standard ISO9141 so yes.
The only cars I have not had it work with are JDM vehicles as their OBDII protocol (JOBD) is slightly different.
are you still satisfied? thanks
Dose it have a boost psi option
does this show boost pressure?
Does anyone have the answer to this question?
No it doesn't
It does not on my car. Possibly if your car has a factory map sensor.
@@Ashquacks not the same, map pressure is 100 kpa more then boost pressure
Will this gauge read up on how much gas in in the car ? My gas gauge is busted
I know it can, but it won't with my vehicle, and my vehicle is a 2005. Maybe with newer vehicles
Hi Brian. My odometer just stopped working. Does the Trip Distance and Distance on this actually work ? I mean is the Distance added up all the time giving you the total distance travelled by the car ? Thanks mate.
Team33 yes
How do you turn off the beeping ?
Change the RPM shift range to 6000.
How to setting water temp from F to C ?
Is the speedometer accurate? Some external monitors were not that accurate.
some of them have speed adjustments on them. so for example if you are going 50mph and it shows you going 54, you go through the menu to adjust it. i believe this unit is one of them
There is adjustment on it.
My conncet failed, whats can be?
hey Brian, it work with obd1?
PacOgro just obd2 bud
Does anyone know how to turn off the beeper? Tnx
Great device..... however, the supplied "manual" is both too small, and has confusing language as to all the functions it can do....obviously written in English by a person whose first language is not English ( naturally),.....and has some quirky text. Unit obviously has much greater capability than I can invoke or understand from the provided paperwork.
It doesnt do turbo?
It can display MAP (manifold absolute pressure) IF supported by the car's ECU. However even if it is, it may not be the cut and clear "X psi of boost" that most people would be expecting. Most cars that do support MAP readout will read it in psia (absolute), meaning 14.7psi is atmospheric and for example at 10psi of boost, MAP will read as 24.7psia.
alliexpress is 25€ atm or less :)
My pictures
Nice device.....too bad they can't spell..... INGITION ??? .... (2:28- 2:30).... ???
Since i installed this thing my brand new battery keeps going dead. Gotta be this thing.
how long after you installed it did your battery die?
and did the screen turn off when you turned the car off?
There are multiple comments about this device failing to connect but the author of this video hasn't replied to any of those comments. If you don't know what the fix is just say you don't know instead of only replying to positive feedback comments.
Because I'm not able to diagnose connection issues over the internet, especially with every car. Unless you have a Mazda Protege as shown in the video, I can't comment on compatibility.
hello brian do you have an instagram
WARNING!!!
Please do not buy this product before checking for car model compatibility, failed connection on 2 cars, system check light on for 1 other car.
AUTOOL must publish compability list to buyers instead of requiring them to ask before purchase 👎🏻👎🏻👎🏻