I don't plan on building a van up. However, I did just buy a Unimog with 10-12 years old habitat. I am sure it will ne a "refresh" ( overhaul) as its coming from UK to USA. However, even before purchase I have been watching you and I get smarter all the time. I read you name and I swear I grow new brain cells!
Great video. How can I use the smart shunt with a 36v battery bank (3@12v Lithium 56ah) for use with a trolling motor setup? I plan on using one smart shunt for cranking/house battery. Would I need a 2nd shunt for trolling motor bank? Thanks
If you add the temperature sensor onto the smart shunt, will it allow for the charging sources to enable temperature compensated charging? Is LiPo4 as sensitive to temperature variation as wet lead is??
Thanks for the good tutotiral. What do you mean by Starter Battery? I'm building a home backup Solar Generator with 12V LiFePo batteries in parallel (qty 4).
I'm referring to the engine starter battery for vehicle-based power systems. In this case you won't have that so you could monitor something else or just turn the auxiliary input setting to "none." Hope that helps, thanks for tuning in.
Can I use just a smart shunt in existing system with flooded batteries and no Other Victron Equipment or must I get the Cerbo GX also to get smart phone info?
Hey there, yes you can definitely use the SmartShunt as a standalone item with no other Victron equipment, and it will work for flooded batteries. To be clear you do not need the Cerbo and can read it with your smartphone using the VictronConnect app. Hope that helps, thanks for tuning in!
A DC current clamp on the output stud is how diagnostics is done. This isn't a permanent install and I'm curious if there is a reliable way to permanently mount a sensor there.
Yes you could set it up as a "DC Power Meter" and put it under the hood. I don't know if it would store the data in that mode, but it would give you a real-time readout.
Setting the Battery SOC on reset to "keep SOC" is okay but if the line fuse blows, the SOC won't change and you'll get false readings. If set to "Zero", the display will show dashes until power is resumed.
I hope they used an upgraded Bluetooth module with the new shunt, the range with the original is terrible. If you buy the $50 dongle (more money), it greatly improves the bluetooth range.
Man, I am so happy to hear someone else say this. I couldn't get my shut to speak with the charge controller unless they were super close to each other over bluetooth. They're both now kind of tucked into the same cabinet in our camper trailer but it's pretty hard to get a signal from the shut. Might have to look into that dongle. I've heard the shunt + BMV has better bluetooth too. I'd probably go that version in future.
I can't get it to connect sitting in my truck driver seat without the dongle, with the dongle, I can connect sitting in my house on the lazy boy 20 yards away. @@andrewford80
@andrewford80 Mine wouldn't connect sitting in my truck hooked to the RV. Put the dongle in, now I can connect from my house living room over 20 yards away. Victron cheeped out on the shunt Bluetooth module to sell you the dongle.
Hi Luke,
I am a subscriber to your Van Power Method. Thanks for this video, it was helpful. In this video, what Victron MultiPlus II are you using?
I don't plan on building a van up. However, I did just buy a Unimog with 10-12 years old habitat. I am sure it will ne a "refresh" ( overhaul) as its coming from UK to USA. However, even before purchase I have been watching you and I get smarter all the time. I read you name and I swear I grow new brain cells!
Finally a good explanation of the settings. Thank you
Glad that was helpful, thanks for tuning in!
Great video. How can I use the smart shunt with a 36v battery bank (3@12v Lithium 56ah) for use with a trolling motor setup? I plan on using one smart shunt for cranking/house battery. Would I need a 2nd shunt for trolling motor bank? Thanks
If you add the temperature sensor onto the smart shunt, will it allow for the charging sources to enable temperature compensated charging? Is LiPo4 as sensitive to temperature variation as wet lead is??
Thanks for a great explanatory video. New sub earned.
Thanks for tuning in, glad you got something out of it!
Another great explanation video!
Thanks for tuning in Sam! Glad you got something out of it!
Thanks for the good tutotiral. What do you mean by Starter Battery? I'm building a home backup Solar Generator with 12V LiFePo batteries in parallel (qty 4).
I'm referring to the engine starter battery for vehicle-based power systems. In this case you won't have that so you could monitor something else or just turn the auxiliary input setting to "none." Hope that helps, thanks for tuning in.
Can I use just a smart shunt in existing system with flooded batteries and no Other Victron Equipment or must I get the Cerbo GX also to get smart phone info?
Hey there, yes you can definitely use the SmartShunt as a standalone item with no other Victron equipment, and it will work for flooded batteries. To be clear you do not need the Cerbo and can read it with your smartphone using the VictronConnect app. Hope that helps, thanks for tuning in!
Good video as always!!
Thank you!
Would this be a good choice for a alternator amp meter?
A DC current clamp on the output stud is how diagnostics is done. This isn't a permanent install and I'm curious if there is a reliable way to permanently mount a sensor there.
Yes you could set it up as a "DC Power Meter" and put it under the hood. I don't know if it would store the data in that mode, but it would give you a real-time readout.
Setting the Battery SOC on reset to "keep SOC" is okay but if the line fuse blows, the SOC won't change and you'll get false readings. If set to "Zero", the display will show dashes until power is resumed.
Ssturk91 is the building
Thanks
Thanks for checking it out David!
thanks!
Thanks for watching!
I hope they used an upgraded Bluetooth module with the new shunt, the range with the original is terrible. If you buy the $50 dongle (more money), it greatly improves the bluetooth range.
Man, I am so happy to hear someone else say this. I couldn't get my shut to speak with the charge controller unless they were super close to each other over bluetooth. They're both now kind of tucked into the same cabinet in our camper trailer but it's pretty hard to get a signal from the shut. Might have to look into that dongle. I've heard the shunt + BMV has better bluetooth too. I'd probably go that version in future.
I can't get it to connect sitting in my truck driver seat without the dongle, with the dongle, I can connect sitting in my house on the lazy boy 20 yards away. @@andrewford80
@andrewford80 Mine wouldn't connect sitting in my truck hooked to the RV. Put the dongle in, now I can connect from my house living room over 20 yards away. Victron cheeped out on the shunt Bluetooth module to sell you the dongle.