Bro You are a Legend, i had no clue at all about Active Directory before. But you have just smash everything into pieces for me. Thank you very much 10 star.
@@SRCOMPUTEREDUCATION www.behringer.com/product.html?modelCode=P0BJZ You can find it on Amazon around 9K. The Mic is local. It is not available on E-commerce site.
Helpful video. When configuring the IP address for the network adapter do you need to already have DHCP setup on the router? Do you have to create a new range of IP addresses beyond what the router already has setup?
Like DNS, it may ask you to set a static IP before installing DHCP tools. If you were testing this at home you may need to disable DHCP on your home router to make sure this one works
I noticed that Administrator has these groups: Administrator, Domain Admins, Domain Users, Enterprise Admins, Group Policy Creation, Schema Admins. My admin account my_admin only has: Administrator, Domain Admins. I imagine that's the reason why my_admin Authorizing DHCP server failed, but I haven't the time to test this right now. I'll just continue installing SCCM/WSUS as Administrator and try to work out permissions to access the installed applications after. Yes I'll have to use an archived WSUS/SCCM because my company on has a license for SQL 2016. I like your web-casts and appreciate your help. Best Regards, Allan
I am encountering many issues with DHCP. Here's my setup: I have a Windows Server 19 vm running on VirtualBox on one host machine I have a Windows 10 Enterprise vm running on VirtualBox on a second host machine. I tried to switch to the same Internal Network for both vms, but they can't ping eachother successfully. Is my issue that these vms need to be running on the same host machine in order to be able to see each other when they're both set to the same internal network? I was able to have them see each other when I had them both set to Bridged Adapter, but this wouldn't allow the server to give the client an IP address. Regardless, thank you for these tutorials, they are very helpful!
1. If both machines network adapter is set with internal, Host-only or Bridge, then can communicate with each other. 2. If you set adapter type to internal this means the VMs can communicate with each other but not with physical machine (Host machine). 3. In your case, if both VMs adapter type is set to Internal and still not able to communicate. A. Check both VMs IP address details, like network address range and subnet mask. B. Check Firewall status on your Server, you can temporary disable the firewall or create a ICMP rule to allow ping. C. If still not working, then send me an email.
This is Great, thank you. New subscriber here. I have a question I already followed your tutorial. I installed the Windows Server on Hyper-V and I successfully connected the host PC on to the domain and the internet is working fine. However, when I connected another PC and successfully join to the domain the internet doesn't work. I run some troubleshooting and I notice when I run ipconfig it cannot get the default gate way that's why the internet doesn't work. Hope you can answer this. Thank you!
As you have mentioned that default gateway address is available might be that is the reason. First check the default gateways IP address in DHCP scope option (For the DHCP scope from client is getting IP address). If it is not there (or incorrect), you can specify (or modify) the default gateway's address in DHCP by adding the default gateways IP address in DHCP scope options. In short check the DHCP scope for default gateways IP address.
Hey yall, i have a small issue with my vm of Server 2022. I have the same network settings as this video and i have not messed with the vm settings but my VM does not have network access. I tried pinging google, and the ip address itself and it gives host is unreachable. What do I do
First, you need to identify your local network IP address range and configure the IP settings on your VM according to that range. In this video, my local network is 172.18.72.0/24, with the router's IP address being 172.18.72.1.
@@MSFTWebCast @MSFT WebCast thanks for responding. I didn't find your email address. I was trying to send my email, but it was taken off. Do you have any other means of contacting you?
It is not necessary to join client to domain for getting an IP address from DHCP server. Any client on your local network (same as DHCP) can get an IP address from your DHCP server.
Hi man. You are sharing a really helpful tutorials. I have a question about configuring DHCP and IPTV box. DHCP service on my WS2019 in working fine but when i connect IPTV it takes an IP address but shows the message that there is no internet connection. In same time the client PC`s in my home network are working fine. So... Is there any additional settings for DHCP server i should make?
authorization DHCP server............. Failed. The authorization of DHCP server failed with error code : 20079. The specific servers are already present in directory service. If the DHCP server is not authorized by AD DS , it cannot respond to DHCP Requests. I am facing this issue , can you help me in resolving this issue or by giving any video link ?
1. Restart the DHCP service and try again. 2. Open MMC and add DHCP snap-in to unauthorized the DHCP server. Restart the DHCP service and try again. 3. It may be possible that the metadata of authorized DHCP server was not cleaned up. In that case, open Active Directory Sites and Services. --> At top, Click View and check “Show Services Node” --> Go to Services-NetService and check whether the retired or removed DHCP server is still in the list. If yes then you can manually delete the old dhcp server if it’s not cleaned up. Check again if we can authorize the DHCP server successfully.
Hello sir, I know this is 3 years ago, I hope you still notice this, when I obtain Ip adress from my member server, why do I not have internet. it says on the status that everything is okay but I have no internet
Its up to your requirement. Generally DHCP service does not consume more resources, so if you dont want to use dedicated server then you can install on domain controller. If you have dedicated server then you can use it for DHCP.
The DHCP client information will appear once the DHCP server assigns an IP address to the client. If you are not seeing any clients, that means the DHCP server has not assigned an IP address to any client.
Hello, Since I m new ,I have software I will installing in server 2019 and how other clients reach to this server question which option of server I need to install ?
Thanks for the video ! Very clear explanation.. I have a question.. How is the physical connection setup done between the host and the server in order for the DHCP address to be assigned to it ? Is the host computer directly connected to an ethernet port on the server or by just joining the domain would work ? thanks to inform..
Hi Sir, I had tried configured dhcp server 2019 and client computer in vmware. In my client computer I cannot get ip address assign from my scope (dhcp server). Fyi, I'm using NAT network in vmware & already uncheck "use local dhcp service to distribute IP addresses to VMs). Any idea?
On the server, I have 2 adapters NAT and Internal Network on client NAT, but in this configuration, it doesn't get configuration from DHCP, but when I add Internal Network to the client, on this adapter configuration is from DHCP
Generally I used Internal Network Adapter type for my VM network adapters. You can also use "Host-only" but with DHCP, you need to disable VirtualBox DHCP service first.
help please, on my client, it shows unidentified network. ive checked the status, the dhcp is enabled edit: ah i used bridge for both vm, and it worked
@@mysticstardust1109 Sounds like your using VirtualBox. I'm using ESXi right now. I prefer VirtualBox because you have access to the host Linux OS. ESXi is an appliance. Good Luck :-)
In LAN most of times we used private IP address range to assign those IP addresses to client computers. I have used one of the private IP range from "Class C".
Hi, i have router from ISP that act as dhcp "server", now i installed for testing purposes w2k19 with active directory, dns and dhcp, like in your video.. Now i have in network 2dhcp, should i disable the dhcp function in the router, so on the network will be only one w2k19 dhcp server? Will all the devices on my network work with internet access?! Thank for answer.
You can disable the DHCP service on the ISP router. But make sure that you have same network configuration settings as ISP router. I mean DHCP scope range, Default Gateways IP Address etc..
Your Setting up Active Directory in Windows Server 2019 (Step By Step Guide) video shows Defender Private: On but this shows Defender Domain: On - does this make a difference?
When you chose automatic settings for the client and has been assigned ip address from the scope of the DHCP server , the one thing missing here of why that happened is to also show that that client was a domain member, else nothing of this would have been possible. I have a different kind of problem here, Since I have setup both server and client with nat network (so there is already a dhcp) the only way to join client to the domain was to change to the ipv4 settings the dns to my servers ip. Then it did join the domain. But it can t take an ip from the server and stays at the ip the vbox's net gave it at first place. Any way to overcome this?
Dont use NAT adapter type. You can use Internal Adapter type for Internal communication. Since we are using VirtualBox, NAT DHCP will take precedence over local DHCP Server.
@@MSFTWebCast Its ok. i ve got it solved by unchecking DHCP server and at once the client pc got an ip address from the ip pool address I had setup earlier.
You need to setup DHCP relay agent on Windows Server or if you have cisco router (configure as a gateway) then configure DHCP IP helper to relay dhcp request to DHCP server.
Hii Bro, I have been following your videos and they are pretty amazing. I need your help with the IP(s). I had a VLAN already assigned to me (in my office for my lab work). However, all the IP(s) from that VLAN have been used and I need more IP(s) to complete my lab, but they simply declined my request and neither they are extending the VLAN host IP range. Now I have decided to create that LAB on my own personal PC and as you know personal PCs get IP from the service provider and they are assigned via DHCP. I need to know is there a way I can create a pool of IP(s) which I can use as STATIC assignment for the VMs I am going to use? What all things do I require to start with so that I end up with a range of IP(s) as much as I want? Appreciate your response.
If you use VirtualBox or VMware for your lab, you dont have worry about the IP addressing pool. For example, In virtualbox you can setup your VMs network adapter to host only and use any IP addressing range of your choice (as I am using 172.18.720/24).
Hey bro. Thanks for the video, I have followed every command here promptly to install DHCP role. But after everything, when I check Ethernet status, the IP addresses mismatch the prescribed scope. Kindly help? Anyone 😢
On your computer open command prompt and type ipconfig /all command, hit enter key. In the output find "default gateway's" address which is your routers LAN interface address.
The issue with this instructional video is the following: 1. When creating a new Win10 client, you did no specify which Network Adapter type you used in the Virtual Box settings? - I have tried using the "Internal Network" adapter, which doesn't work - I have tried using "Host Only" adapter on the DC client while disabling the Virtual Box DHCP server (and again with Virtual Box DHCP server enabled) - still doesn't work. 2. You mentioned from video 1, that we need to use "Bridged" adapter upon installing Windows Server. But you've mentioned several times on the comment section, that you use "Internal Network" adapter and sometimes "Host Only"? Which one should we use? 3. The IPv4 settings on your WIN10 are somehow already assigned static IP? When did you perform this step? If watching the videoes in the order of the Playlist, I don't see anywhere where it has been done.
After awhile, I simply changed the Network Type to "Bridge" on my Windows 10 client. And then dded it to the domain "mylab.local" and later had it assigned automatically a DNS from the server. Now I can see it from the "Leased" section on my DHCP client. Still, this "process" wasn't in your instructional video.
I have one question could you please resolve the question is “how to resolve if the windows or Linux machine went shutdown, how to wake up the machine” and am not able to take ssh to that machine Linux machine ,please reply me by tomorrow
Bro You are a Legend, i had no clue at all about Active Directory before. But you have just smash everything into pieces for me. Thank you very much 10 star.
This is the best IT channel I have found online...Well done!
Wow, thanks!
Bro you are too good in teaching the subject matter, i am learning a lot from you, God Bless you
Thank You.
Bro thank you brudda.sending love from Poland.
Thank you too
Is the wok still there?
Bro you're the best, very descriptive tutorial and nice audio. New subscriber
I appreciate that!
I would like to say thank you so much for this video explaining the correct way. Keep up the good work bro...
thank you, you are 100x better than my teacher (he sit on phone all lesson and no teach 🤣🤣)
Excellent tutorial. I have just subscribed to your channel
Awesome, thank you!
Very helpful.. I hope you will keep uploading video
Bravo, you nailed it in simplest terms
Thank you!
Wow, amazing explanation, Thank you
Excellent explanation!! 👌
Glad you think so!
Your videos are awesome, which mic are you using?
I have Behringer UMC 202HD audio interface with Audio Magic microphone.
And thank you.
@@MSFTWebCast great, can you provide exact link, I searched but it bit confusing
@@SRCOMPUTEREDUCATION www.behringer.com/product.html?modelCode=P0BJZ You can find it on Amazon around 9K. The Mic is local. It is not available on E-commerce site.
Excellent Information!! I've subscribed to your channel
Thanks for the sub!
Superb man... Thank You
Thanks bro nice explanation
Good Thank You Keep it up..
Worked first go. Champion
Thank you.
Thank you very much sir
Nice explanation
you deserve more subs!
Thank You, appreciate that! Maybe soon we have 100K.
Great video
Nice video 👍
thank you very much bro. thank you thankyou
Nice video you just made it all simple
Glad you liked it
Helpful video. When configuring the IP address for the network adapter do you need to already have DHCP setup on the router? Do you have to create a new range of IP addresses beyond what the router already has setup?
Like DNS, it may ask you to set a static IP before installing DHCP tools.
If you were testing this at home you may need to disable DHCP on your home router to make sure this one works
Thanks a hecking ton brother
Well done..subscribed 👍
Awesome, thank you!
I noticed that Administrator has these groups: Administrator, Domain Admins, Domain Users, Enterprise Admins, Group Policy Creation, Schema Admins.
My admin account my_admin only has: Administrator, Domain Admins.
I imagine that's the reason why my_admin Authorizing DHCP server failed, but I haven't the time to test this right now. I'll just continue installing SCCM/WSUS as Administrator and try to work out permissions to access the installed applications after. Yes I'll have to use an archived WSUS/SCCM because my company on has a license for SQL 2016.
I like your web-casts and appreciate your help. Best Regards, Allan
Very useful vedio and clear ti understand
Thanks a lot
thanks for this video! It helped me a lot ( :
Nice work 👏🏻
did you change network adapter in windows server 2019 and client ? example : vmnet 1 or vmnet 2? hope u notice this .
Most of time I used Internal or Hostonly adapter type in VirtualBox. If you are using VMWare than adjust the settings.
hi, do you have a tutorial on how to setup a separate dhcp server and have it integrated to the domain controller?
Logged in as homelab\Administrator and it worked. Come on man, I'm looking to you as the expert.
Thx a lot!!! Great video!
Good video, thank you!
Thanks. Good work.
are we just doing a fresh install of windows 10 for the client computer?
Well explained! Thanks for posting this!
for anyone have done everything but Address Leases keep being blank, run "ipconfig /renew" in windows 10 and refresh Address Leases.
May I know what network settings you used in virtual box for the server and client?
Most of the time, the VM adapter type is configured as Internal. If I need internet access in the VMs, I change the adapter to Bridge type.
Thanks for this
I am encountering many issues with DHCP. Here's my setup:
I have a Windows Server 19 vm running on VirtualBox on one host machine
I have a Windows 10 Enterprise vm running on VirtualBox on a second host machine.
I tried to switch to the same Internal Network for both vms, but they can't ping eachother successfully.
Is my issue that these vms need to be running on the same host machine in order to be able to see each other when they're both set to the same internal network?
I was able to have them see each other when I had them both set to Bridged Adapter, but this wouldn't allow the server to give the client an IP address.
Regardless, thank you for these tutorials, they are very helpful!
1. If both machines network adapter is set with internal, Host-only or Bridge, then can communicate with each other.
2. If you set adapter type to internal this means the VMs can communicate with each other but not with physical machine (Host machine).
3. In your case, if both VMs adapter type is set to Internal and still not able to communicate.
A. Check both VMs IP address details, like network address range and subnet mask.
B. Check Firewall status on your Server, you can temporary disable the firewall or create a ICMP rule to allow ping.
C. If still not working, then send me an email.
@@MSFTWebCast Thank you so much! I was able to figure it out. Love your videos by the way, they are so helpful.
Your lecture is better than my professor's Lmao.
Thank You!
This is Great, thank you. New subscriber here. I have a question I already followed your tutorial. I installed the Windows Server on Hyper-V and I successfully connected the host PC on to the domain and the internet is working fine. However, when I connected another PC and successfully join to the domain the internet doesn't work. I run some troubleshooting and I notice when I run ipconfig it cannot get the default gate way that's why the internet doesn't work. Hope you can answer this. Thank you!
As you have mentioned that default gateway address is available might be that is the reason. First check the default gateways IP address in DHCP scope option (For the DHCP scope from client is getting IP address). If it is not there (or incorrect), you can specify (or modify) the default gateway's address in DHCP by adding the default gateways IP address in DHCP scope options. In short check the DHCP scope for default gateways IP address.
@@MSFTWebCast Thank you very much i did it and it works. I rewatch this video again.
Can we create one virtual machine server and client, or different pc is required?
Yes, you can use one server VM and one client VM.
what will heapend if a have firewall with incuded dhpc in my network?
Hey yall, i have a small issue with my vm of Server 2022. I have the same network settings as this video and i have not messed with the vm settings but my VM does not have network access. I tried pinging google, and the ip address itself and it gives host is unreachable. What do I do
First, you need to identify your local network IP address range and configure the IP settings on your VM according to that range. In this video, my local network is 172.18.72.0/24, with the router's IP address being 172.18.72.1.
Sir, ur explanation is awesome, but the screen is very small to view.
Hi I'm still having major problems connecting a computer to a domain controller. I'm using hyper v. Do you offer coaching sessions via video calls?
Send an email. You can find my email address on channels about page.
@@MSFTWebCast @MSFT WebCast thanks for responding. I didn't find your email address. I was trying to send my email, but it was taken off. Do you have any other means of contacting you?
@@mrvegan1497 On Channels about page, under details section, click on view email address. I will give you my contact number over the email.
Thank you!!!
Client pc is using ip from Dhcp of Vmware Workstation. how i should change the settings of Network Editor settings?
You can disable DHCP service for specific VNet using Virtual Network Editor. Select your VNet and go to DHCP. Click on Stop to stop DHCP service.
Hi..what if we have 200 pcs with static IPs...and then we decided to use DHCP. So we have to go to all 200 pcs to set IP automatically??????..😬
Hai...
To get the DHCP to the client PC, first thing the client PC should be connected to DOMAIN right...?
It is not necessary to join client to domain for getting an IP address from DHCP server. Any client on your local network (same as DHCP) can get an IP address from your DHCP server.
@@MSFTWebCast great thanks...
Can I get your Instagram ID ...?
Hi there, please make a tutorial video about windows server 2022. thnx
Soon.
bro how about static ip address how to create can yu help me
how about static ip address how to create
Hi man. You are sharing a really helpful tutorials. I have a question about configuring DHCP and IPTV box. DHCP service on my WS2019 in working fine but when i connect IPTV it takes an IP address but shows the message that there is no internet connection. In same time the client PC`s in my home network are working fine. So...
Is there any additional settings for DHCP server i should make?
try checking the dns server or the default gateway usually the issue unless the default gateway is not connected to the internet
and then after authorising config try ipconfig /renew
Hey something is wrong. My VM for some reason already has a DHCP server and I cant login to it to disable it
Changing IP settings requires Admin or Network Configuration Operators level permission.
after configuring a dhcp server on window server, should we disable the dhcp on the firewall/Router ?
If you plan to user DHCP service on your windows server then you can disable it on router.
Please advise how the router's IP was decided in a test environment.
If this is a test environment then there is no need for that. Even if you dont specify then it is OK.
When I refresh the leases nothing pops up, is there anyway to fix that?
What do you mean by nothing pops up? You mean client is not getting an IP address?
@@MSFTWebCast I believe so
i'll update here if i clear my interview tomorrow.
Thank you
authorization DHCP server............. Failed. The authorization of DHCP server failed with error code : 20079. The specific servers are already present in directory service.
If the DHCP server is not authorized by AD DS , it cannot respond to DHCP Requests.
I am facing this issue , can you help me in resolving this issue or by giving any video link ?
1. Restart the DHCP service and try again.
2. Open MMC and add DHCP snap-in to unauthorized the DHCP server. Restart the DHCP service and try again.
3. It may be possible that the metadata of authorized DHCP server was not cleaned up. In that case, open Active Directory Sites and Services. --> At top, Click View and check “Show Services Node” --> Go to Services-NetService and check whether the retired or removed DHCP server is still in the list. If yes then you can manually delete the old dhcp server if it’s not cleaned up. Check again if we can authorize the DHCP server successfully.
Hello sir, I know this is 3 years ago, I hope you still notice this, when I obtain Ip adress from my member server, why do I not have internet. it says on the status that everything is okay but I have no internet
You need to setup the default gateway and DNS servers IP address correctly as per your network range and IP addressing scheme.
Didn't work for me. I got an error message and the DCHP service was not installed. Don't know what to do.
did u install dhcp on the server manager?
Does the DHCP server role need to be installed on the domain controller or can it be a standalone server as long as it’s on the domain?
Its up to your requirement. Generally DHCP service does not consume more resources, so if you dont want to use dedicated server then you can install on domain controller. If you have dedicated server then you can use it for DHCP.
why i cannot see any client at the address pool?
The DHCP client information will appear once the DHCP server assigns an IP address to the client. If you are not seeing any clients, that means the DHCP server has not assigned an IP address to any client.
4:55 i've been searching why client pc got weird ip.. turns out i forgot clicking this little thing 😂
Hello, Since I m new ,I have software I will installing in server 2019 and how other clients reach to this server question
which option of server I need to install ?
Thanks for the video ! Very clear explanation.. I have a question.. How is the physical connection setup done between the host and the server in order for the DHCP address to be assigned to it ? Is the host computer directly connected to an ethernet port on the server or by just joining the domain would work ? thanks to inform..
Any computer on your network can obtain IP address from the DHCP server, it may be domain computer or workgroup computer.
What is the network connection details of server 2012 before connecting
Why doesn't it work for me, when I enter the ipv4 details, my dhcp, the default gateway address, ...
Hi Sir, I had tried configured dhcp server 2019 and client computer in vmware. In my client computer I cannot get ip address assign from my scope (dhcp server). Fyi, I'm using NAT network in vmware & already uncheck "use local dhcp service to distribute IP addresses to VMs). Any idea?
Try using "host-only" adapter type.
@@MSFTWebCast still cannot, I get 169 ip address
thank you, i solved the problem already
What about configuring IPv6?
What are your network adapters in virtual box for server and client?
On the server, I have 2 adapters NAT and Internal Network on client NAT, but in this configuration, it doesn't get configuration from DHCP, but when I add Internal Network to the client, on this adapter configuration is from DHCP
Generally I used Internal Network Adapter type for my VM network adapters. You can also use "Host-only" but with DHCP, you need to disable VirtualBox DHCP service first.
help please, on my client, it shows unidentified network. ive checked the status, the dhcp is enabled
edit: ah i used bridge for both vm, and it worked
Do you have an Internet connection? Can you ping 8.8.8.8?
@@CallMeAllan yup it works, I don't think I have an internet connection, but I solved it by changing VM settings to bridge. thanks for replying~
@@mysticstardust1109 Sounds like your using VirtualBox. I'm using ESXi right now. I prefer VirtualBox because you have access to the host Linux OS. ESXi is an appliance. Good Luck :-)
How did you decide what IP addresses to include in the scope
In LAN most of times we used private IP address range to assign those IP addresses to client computers. I have used one of the private IP range from "Class C".
My address leases is not showing . Can anyone tell what is happening I want to submit my lab urgently today help me .
Hi, i have router from ISP that act as dhcp "server", now i installed for testing purposes w2k19 with active directory, dns and dhcp, like in your video.. Now i have in network 2dhcp, should i disable the dhcp function in the router, so on the network will be only one w2k19 dhcp server? Will all the devices on my network work with internet access?! Thank for answer.
You can disable the DHCP service on the ISP router. But make sure that you have same network configuration settings as ISP router. I mean DHCP scope range, Default Gateways IP Address etc..
Your Setting up Active Directory in Windows Server 2019 (Step By Step Guide) video shows Defender Private: On but this shows Defender Domain: On - does this make a difference?
Note at all.
When you chose automatic settings for the client and has been assigned ip address from the scope of the DHCP server , the one thing missing here of why that happened is to also show that that client was a domain member, else nothing of this would have been possible.
I have a different kind of problem here, Since I have setup both server and client with nat network (so there is already a dhcp) the only way to join client to the domain was to change to the ipv4 settings the dns to my servers ip. Then it did join the domain. But it can t take an ip from the server and stays at the ip the vbox's net gave it at first place. Any way to overcome this?
Dont use NAT adapter type. You can use Internal Adapter type for Internal communication. Since we are using VirtualBox, NAT DHCP will take precedence over local DHCP Server.
@@MSFTWebCast Its ok. i ve got it solved by unchecking DHCP server and at once the client pc got an ip address from the ip pool address I had setup earlier.
@@ierosgr You are my hero!!!!!
@@olympushasfallen8265 Glad that I helped in any way.
How about if multiple vlans
You need to setup DHCP relay agent on Windows Server or if you have cisco router (configure as a gateway) then configure DHCP IP helper to relay dhcp request to DHCP server.
Hii Bro,
I have been following your videos and they are pretty amazing. I need your help with the IP(s).
I had a VLAN already assigned to me (in my office for my lab work). However, all the IP(s) from that VLAN have been used and I need more IP(s) to complete my lab, but they simply declined my request and neither they are extending the VLAN host IP range.
Now I have decided to create that LAB on my own personal PC and as you know personal PCs get IP from the service provider and they are assigned via DHCP. I need to know is there a way I can create a pool of IP(s) which I can use as STATIC assignment for the VMs I am going to use? What all things do I require to start with so that I end up with a range of IP(s) as much as I want?
Appreciate your response.
If you use VirtualBox or VMware for your lab, you dont have worry about the IP addressing pool.
For example, In virtualbox you can setup your VMs network adapter to host only and use any IP addressing range of your choice (as I am using 172.18.720/24).
Hey bro. Thanks for the video, I have followed every command here promptly to install DHCP role. But after everything, when I check Ethernet status, the IP addresses mismatch the prescribed scope. Kindly help? Anyone 😢
THanks Sir
It is required that server should be in domain..?
Not compulsory. You can setup DHCP server role on workgroup server as well.
how do you know the router adresse?
On your computer open command prompt and type ipconfig /all command, hit enter key. In the output find "default gateway's" address which is your routers LAN interface address.
If DHCP server install which roles install in previously...??
i also want to ask the same ques.
@@prathvirsingh2551 previously install in DNS role and after dhcp role install ...
How to get router is address
On any computer on your network which is connected to the internet, open run menu and type ipconfig command to get the address of the default gateway.
@@MSFTWebCast I have been doing it from afternoon I still didn't get😣
The issue with this instructional video is the following:
1. When creating a new Win10 client, you did no specify which Network Adapter type you used in the Virtual Box settings?
- I have tried using the "Internal Network" adapter, which doesn't work
- I have tried using "Host Only" adapter on the DC client while disabling the Virtual Box DHCP server (and again with Virtual Box DHCP server enabled) - still doesn't work.
2. You mentioned from video 1, that we need to use "Bridged" adapter upon installing Windows Server. But you've mentioned several times on the comment section, that you use "Internal Network" adapter and sometimes "Host Only"? Which one should we use?
3. The IPv4 settings on your WIN10 are somehow already assigned static IP? When did you perform this step? If watching the videoes in the order of the Playlist, I don't see anywhere where it has been done.
After awhile, I simply changed the Network Type to "Bridge" on my Windows 10 client. And then dded it to the domain "mylab.local" and later had it assigned automatically a DNS from the server.
Now I can see it from the "Leased" section on my DHCP client. Still, this "process" wasn't in your instructional video.
Is it give ip to server also
yes.
I have one question could you please resolve the question is “how to resolve if the windows or Linux machine went shutdown, how to wake up the machine” and am not able to take ssh to that machine Linux machine ,please reply me by tomorrow
Did not work. Followed this video and my DHCP is broken. Had to reinstall twice. Still wont work.
fine
Thanks
it so simple
No internet access
Install Nat in WS2k19
Done
hola Jaume