Wheel Horse 520 XI...Leaky Rearend!
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- The 520 Wheel Horse we split the engine on is back for a mystery leak. In this video we find the leak and make an attempt to repair it. I included a product link to the item I purchased below. This is an affiliate link and I will receive a small commission if you purchase the item.
Air Hammer:
amzn.to/3Us64Td
Click here to subscribe to my channel:
/ @flatthunder
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. The item does not cost more if you navigate to the product via the supplied link. Note I did not receive discounts on this product prior to creating this video. I paid the full price and I think it is a quality piece of equipment. The small commission I would receive helps me continue to make quality content. Thank you for the support!
A friend of mine had a leaky rear end once. He was off work for 3 weeks. Ba da bum. Great video!
I hate it when that happens 🤣🤣🤣.... Thanks for watching my Friend! 👍😁
Good fix! I had a similar problem with a seal on a Jeep Wrangler. I was driving down the freeway and a long piece of thin plastic wrap flew out of a garbage truck in front of me. It went under my Jeep and I didn't think much about it until I got a weird driveline vibration shortly after that. I pulled over and crawled under the Jeep to find the plastic tightly wrapped around the driveshaft at the rear axle. It took 10 minutes of cutting with a utility knife to get the plastic off. The plastic had destroyed my pinion seal. Now I cringe and watch my rear view mirror every time I see a plastic bag go under my truck on the freeway.
Thanks! Wow isn't that luck. I have seen some interesting things wrapped around driveshafts. I once encountered a S10 or Dakota truck with a set of mattress springs tangled up n wrapped around the shaft 🙄.....I will now be dodging every plastic bag I see on the highway! Thanks for watching my Friend! 👍😁
Nice work Andy! 😁👍 I always try to use antiseize on projects too 🔧
Thanks Zane! I have a love hate kind of relationship with it. It works good, but also gets everywhere when I use it 🤣. Thanks for watching my Friend! 👍😁
Hey Andy. Just yesterday I bought a 2lb. slide hammer kit at Harbor Freight for $25. Might be replacing axle seals on a John Deere STX38 I got for $50. I love finding deals on lawn equipment people don't know how to fix and then get crazy high quotes from repair shops. Thanks for posting.
I might have to check out that slide hammer kit! I have a large one (way too big for this job) and a couple homemade smaller units lying around. I heard that, I love fixing old stuff and saving it from the scrap yard! Thanks for watching my Friend! 👍😁
Another good video Andy 👍🇺🇲
Thanks for watching my Friend! 👍😁
i have these wheel weights!
i have a 1993 wheel horse 520, love this content.
Thanks! My personal tractor is a 92' vintage 520. They are great tractors! Thanks for watching and sharing! 👍😁
@@FlatThunder my wheelhorse 520 is now surging, it has a new carb and fuel filter, i do see debris in the fuel tank by petcock, i ordered a new petcock and fuel pump just to be safe. Have you had any surging issuse?
@@leedimatteo5078 yes typically it is a fuel delivery issue and I think you are going down the right path. I never fully replaced a carburetor on one, but have fully disassembled and cleaned them on multiple occasions. Clean your carburetor and check the float seat and float height after replacing the fuel pump. Thanks for watching! 👍😁
@@FlatThunder so after replacing the fuel filter, fuel pump and petcock still surging, i checked the float seat and float height, one of the floats was full of gas!!
@@leedimatteo5078 winner winner! If it was a brand new carburetor I might request a credit or at least a replacement float. I always shake the floats and listen for sloshing fluid during rebuilds. It's pretty common for them to develop pin holes and leak. Happy you found the issue! 👍😁