*Note* If you are fitting these brackets to an OEM knuckle, you will need to simply flip the brackets to fit the lower strut bolt, this was not covered in the video as we filmed this with a drop knuckle!
Thanks GkTech, there is also a need for a simple rotor/caliper upgrade for the rear of S chassis also. Something that could balance out the front without the need of a pedal box or swapping to 300zx style internal drum. There is a way of running maxima rotors and some datsun caliper bracket from the late 80s, I've done it but it ain't great. Pretty please! With lots of sugar.
Hello this video are helpful Im thinking’s putting a 14 inch rotor on my 18 inch by 8.5 wheels I wonder if the stock caliper will fit if I put caliper adapter?
Will this fit an A31 cefiro which has had the gktech 5 stud conversion hubs fitted? Still has factory knuckle with the “small brakes” (i will get 4 pot brakes for this)
![[TH] 2024 PMSL SEA Finals D3 | Fall | รู้ผลทีมแชมป์ พร้อมตั๋วสู่ PMGC](http://i.ytimg.com/vi/7NxsN0Ch6vk/mqdefault.jpg)
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (1/4)](http://i.ytimg.com/vi/m05kZ2GDKXg/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
*Note*
If you are fitting these brackets to an OEM knuckle, you will need to simply flip the brackets to fit the lower strut bolt, this was not covered in the video as we filmed this with a drop knuckle!
Thanks GkTech, there is also a need for a simple rotor/caliper upgrade for the rear of S chassis also. Something that could balance out the front without the need of a pedal box or swapping to 300zx style internal drum. There is a way of running maxima rotors and some datsun caliper bracket from the late 80s, I've done it but it ain't great. Pretty please! With lots of sugar.
Hey dude!
We will see what we can come up with!
Gktech does freakin’ rule!
Hello this video are helpful Im thinking’s putting a 14 inch rotor on my 18 inch by 8.5 wheels I wonder if the stock caliper will fit if I put caliper adapter?
It would have to be one of the rotors specifically listed above for this adapter to work, or that at least we can confirm, not just any 14inch rotor!
Will this fit an A31 cefiro which has had the gktech 5 stud conversion hubs fitted? Still has factory knuckle with the “small brakes” (i will get 4 pot brakes for this)
Will these fit on my Z32?
Sorry, we have not tested them on the Z32 knuckle at this point in time, I believe they will not fit, but again cannot confirm.
i have 30mm z32 calipers, will it work?
They work with the TT calipers, cannot confirm NA.
Does this fit the s13
Not unless it's converted to 5 stud
why not for r33??? :(
they have it for r33 gtst too my guy
@@schalachi Where? Not seeing that on their site.