I speak not only for myself when i say i watch a fair amount of install related youtube content but the wit and effectiveness of these vids are unmatched. "3 hours ago when we started this video" had me lmao'ing
When installing the calipers would what would be considered the rear right calipers turn into the rear left and vice versa for other side? like when buying a pair of the calipers that are made for the rear right normally since they are going on the other side of the rotor it would turn into the rear left due to the bleeder?
[edit] NVM. I just don't know anything about drifting. Sorry about the rant. Um. what the bloody hell did I just watch? LOL. I saw this at CZP and thought it was a disc-based e-brake which would be sweet, tossing the shitty drums. but no? What the hell is this? why do you need 2 calipers? and if that's justified, where the hell do you get a brake line splitter? And, seriously, it's the rears, so who cares?
I speak not only for myself when i say i watch a fair amount of install related youtube content but the wit and effectiveness of these vids are unmatched. "3 hours ago when we started this video" had me lmao'ing
Best part of install vid, Bearings just slide out lolololol! Awesome edit as always!
Sick install video that was awesome 👏🏻
Loved the commentary...
Does this work with akebonos on a 350z?
Waiting patiently to see if I ran my hydraulic lines properly. ✌️☠️
What type of calipars do these fit. Please respond i need to know
I followed all the steps exactly but now the hub nut won’t come off and there is no handbrake to hold the hub in place
Hey there, send an email to sales@gktech.com and we will assist where we can!
When installing the calipers would what would be considered the rear right calipers turn into the rear left and vice versa for other side? like when buying a pair of the calipers that are made for the rear right normally since they are going on the other side of the rotor it would turn into the rear left due to the bleeder?
That's correct mate.
Does it work if i have akebonos?
Can you order just the hardware kit (bolts and the spacers)
That’s no problem, best to use the website chat or email sales@gktech.com directly.
Watched the other video and still unsure wether to use a 10mm spacer or a 15mm spacer for a 2007 nissan 350z
I'd recommend 10mm
Anyone know the size of the caliper spacer? I just got one side done and noticed I either lost one or only got 3.
Would a grip build benefit from this?
Is it possible to engage both calipers at once/not the handbrake but with the foot brake.
Brake balance is usually more towards the front because of the weight shift so not sure if that would help too much. Would also f with abs maybe
When you installed the E-brake nuts do those need any sort of loc-tite since the nut is tightened like 2-3 threads?
We recommend loctite, or we offer extended studs for the drum mount.
What Brembo calipers did you put on this I'm making a 2jz engine swapped z with twin turbo for drift and the track its going to be very unique.
They are the OEM track edition 350Z brembo calipers
Does this require modification to the bracket or knuckle? Mine won’t sit flush on the knuckle on my g37
Hi Chris, some Z34/G37 will require slight shaving to the knuckle.
So you only need to install this on one side?
There was no point in repeating the steps when they are the same, it's to be installed on both sides.
Can we use your kit inline? I see you can opt out of the dual caliper. Can you do a tutorial on an inline setup if possible??
We don't have plans on installing an inline kit on a Z but we will be doing S chassis in the near future which will be practically the same method.
if i buy the kit for my 370z do i need to buy the dual caliper setup? and if so does it have to be the same as the other brake pad on the wheel?
You will be required to source additional calipers, whilst the caliper must be the same you are free to use any pad of your choice.
Can I run factory non Brembos on these if I still run my factory oem Brembos?
Calipers can not be mixed and matched due to rotor differences
Hi there!
Would this work with WILWOOD 1 or 2 pot calipers ?
It only works with the OEM 370Z parts. We don't make any brackets for wilwood options on the Z as the OEM components are well and truly good enough.
@@gktech
Many thanks for reply!! I just struggle to source a set oem over here under 300£ right now
Is locktite needed for any of the bolts?
Hey Daniel, it is not.
can you use front calipers for the ebrake or would they have to be rears?
They need to be rears
@@gktech they also have to be the same as what you have right? like brembo w brembo or could you use something else?
@@SashaGransjean They need to be a matching pair, correct. This is due to different calipers requiring a different rotor.
do you produce it also for subaru impreza wrx sti gdb?
Sorry, we don't.
[edit] NVM. I just don't know anything about drifting. Sorry about the rant.
Um. what the bloody hell did I just watch? LOL. I saw this at CZP and thought it was a disc-based e-brake which would be sweet, tossing the shitty drums. but no? What the hell is this? why do you need 2 calipers? and if that's justified, where the hell do you get a brake line splitter? And, seriously, it's the rears, so who cares?