@@HandToolRescue as any and every time we watching your vids, mate! Love the humor. You remind me of my best friend, which is not with us anymore. Even my kids love to watch HTR!
You have a knack for finding tools that look like they may have single handedly been the inspiration for numerous consumer safety regulations being passed. You are brave to use them. I love it!
Can we all appreciate all the work that didn’t make the edit? All those fasteners and small parts must’ve taken hours behind the scenes and don’t go unnoticed.
I was once complaining to an old plumber about the steel pipes I had in my house. He gave me the best advice I’ve ever received. Always start by tightening the pipe a little before loosening it.
.....im not sure if you're being sarcastic..(dang internet) But if not, I'm going to start using this method....unfortunately....with mechanics (and especially old and rusted parts) if you over tighten something that was over tightened to begin with...your risk breaking it off. What a double edged sword....
You don't really have to visibly move it, if it is already quite thigt. But let me tell you if you have some sort of feeling for what a part can handle, you won't break stuff, that wouldnd have broken either ways. Yust doing this or change the direction a few times is definitely a livesaver of a trick.
@@mUnky889 I learned that by fixing cars and in fixing free stall loops at the dairy. Things get rusty, and your happy just to have it move a bit in any direction. Gets difficult to turn, and you just go back a bit. Use oil, but the heat from friction even helps.
Easily the best restoration channel on TH-cam - humour, actual siezed parts, and no disassembly with surgeons tweezers and magic - the subtitles were great 😂
I work on clockwork mechanisms as a hobby and I feel like an absolute tool every time I place a wheel or a bridge with tweezers, even though that's actually the best way to do it, given the size of the parts. Those people have ruined tweezers for me.
I watch Nekkid Watchmaker, and he uses tweezers to lift bridges and springs and tiny screws etc, probably similar for yourself, and granted, I may have been exaggerating for effect, but I was watching someone disassemble a giant doorbell the other day, in surgical gloves and lift oversized screws and nuts with tweezers - all a bit unnecessary - our man here has oil in his fingerprints and makes fun of falling for a lefty tighty curve ball - the awful smiling freeze frame on the intro, a good thud as his head lands on the sand blasting cabinet (how many people need to use a cabinet at the same time by the way 🤔 where is that from?). Great viewing every time 😀👍
We don’t get a lot of these videos because it’s obvious that they take a lot of time to produce. I have never missed a restoration video on Hand Tool Rescue. Always excellent.
Yes! At first I thought...'Ohhh hes gone to the cutoff wheel for this one.' '...aaand this one...' / 'Oh no...Eric no...Reverse threa.....awww nevermind'
I've been watching this channel for a while, and I'd never imagined myself doing this sort of thing. But now because of my job, I'm seeing literal tons of great quality old tools get recycled every week. I've started grabbing and setting aside things I know I could fix. So far mostly 70's power tools that just need a new cord or new brushes. Figure I'll clean and refurbish them as best I'm able, and throw them up on eBay if nothing else. Honestly, I just like how old tools look, and I'll probably collect a lot of them.
Do it, do not put it on a back burner, DO IT! You will get the odd scumbag that will steal the items, but mostly you'll be selling to good people that love older tools. Good luck Sir/Ma'am.
I agree with you about old tools. I've bought some very high quality used stuff on ebay. This channel also inspired me to restore my grandpa's wilton vise (had to watch several other videos to make sure I was doing it a good service)
It really feels like this one had it in for you; everything that could go wrong seemed to go wrong! Thanks for the thoroughly entertaining videos Mr. Hand Tool!
I'm a self proclaimed "Small Engine Nut" The craftsmanship and engineering in these old motors are so fascinating. Recently rebuilt a 1949 Evinrude "Speedifour" outboard. Opposed 4 cylinder, 33.5 hp! I think you'd really enjoy some of the 40s and earlier outboards, before cowlings came into style. All the bits and bobs are out in the open, exposed flywheel, and myriad knobs and levers on the front.
The brazing work on the cog @32:04 actually made my day. Call me old fashioned, but that was blissful. A perfect accompaniment to a glass of wine and a cigarette at the end of a long day.
To me, this is one of my favorite restorations I've seen you perform. You took a100 year old behemoth monster completely apart and rebuilt it to last another 100 years were it in steady use.
I've been tasking engines and carbs etc. apart since I was about 8 years old. Sometimes got them back together too, without a camera to record what I had done. I am now 80 yo, and in all these years I don't think I have ever seen a more complicated machine. No matter what part of it you attack, it has more parts than anything I've yet seen. Wow! Those guys really had some imagination. You've improved on that and brought it back to life as a work of mechanical art. SO WELL DONE...of course. That's a piece any collector would envy.
This one really makes me appreciate what you do to entertain us on youtube. There were so many times in this video where if I had been doing it I would have walked away and trashed it but you just power through. Great video!
I love when someone else knows what they are talking about when it comes to lifting heavy thing, you also need to do your best to keep your legs out of it entirely.
I like that you don't sand, file, polish, grind, and body fill every bit of character and originality out of most of your restoration projects except in the most rare of cases. These are truly restorations.
I once restored an old rototiller, very old, and I had many of the same problems you encountered. You did a wonderful job on that old, old engine and applaud you. Great work.
Gosh i love this channel! I really enjoy the opening credits, it never fails to give me a chuckle. I really enjoy your humor and the fun you seem to have editing this vids. I also love the real work you do on these projects, nothing fake here.
What a heartbreaker to see that those gears were threaded on. I don't know how you could have known that. This machine must have been fabulously expensive in the 1920's.
You are by far and away the best restoration video maker other there. Thank you so much for bringing these wonderful items back to life. Please keep doing what you do so well. My very best to you and yours.
I have watched this channel for a long time and really like it. I appreciate everything you do by getting these really old tools looking and working new again. But it’s just a shame that so many people on TH-cam rip your concept off they are doing the same exact thing and it’s identical to what you do, but it’s OK. I consider you the OG.
One of your best. What a machine made when men were men and lawnmowers were built up to a standard. I still run a vintage UK built ATCO!. Hope to see it in action on the next episode. Best wishes from the UK and thank you for posting.
Who’d a thunk they’d of reached out 104 years to put the screws to ya by threading that sprocket and gear onto the shafts. I guess screws and shafts come with the territory when you’re restoring antique machinery. Love your channel. Your work is amazing!!👍👍
That mower was sent from heaven to teach you about your new self and to let go of your old self 😂❤ Your pain saves thousands of us from vast amounts of pain and suffering… and your lessons are well headed, eg painting on rust.
Simply amazing 1933 reel mower my first ever seeing one. I got lost on the points yet everything seems straight forward. Always enjoy your content and humor keep up the fantastic work.. 👍🏼👍🏼
I didn't realize this was a "Part 1 of ?" until the video ended abruptly and I re-read the title - I was expecting to end with grass getting cut. Silly me for not noticing that's it's just the engine component restoration in this one.
I haven’t commented on any videos yet, but to the maker, you are the best at rebuilding and adding noises to film edits. Thanks, that’s what we like to hear. And good job, all of your restored items are great. I appreciate the detail and paint and the maple syrup humor.
It's practically rot proof at this point from all the oils and grease soaked into it. I bet he could set it outside and his great grandchildren would still find it sturdy.
It is so amazing how something as complicated as this lawm mower , could have ever been designed to work. Great job at restoring it. You have a part of history and a work of art. Hope to see part 2 ?
That was AMAZING!!! (as always :D ) - You do SUCH GOOD WORK!!! And I just don't know how you're able to keep track of all the parts, or know how these strange things work, or what the best replacement part should be without using modern materials (as in replacing the float and still using cork, but coating it it with a gasoline resistant material... I would have just put on a modern float lol) - You are ONE OF A KIND and I LOVE YOUR CHANNEL!!! (I just wish I wasn't unemployed and strapped for cash because those wrenches are SWEET!!!) THANK YOU for the AWESOME Video, and I CANNOT WAIT to see the work on the Mower Body!!! GOOD LUCK!!!
If you read the subtitles starting where he's machining the cork, you'll discover that he also ended up using a modern foamed plastic material to remake the float, because the gasoline resistant material wasn't.
I will always be in awe of someone who can take an engine apart, put it back together and... get it started again. Sincere congratulations ! (Google traduction, I am french 🤪)
I raised 75k and Christina Ann Tucker is to be thanked. I got my self my dream car 🚗 just last weekend, My journey with her started after my best friend came back from New York and saw me suffering in dept then told me about her and how to change my life through her. Christina A. Tucker is the kind of person one needs in his or her life! I got a home, a good wife, and a beautiful daughter. Note!:: this is not a promotion but me trying to make a point that no matter what happens, always have faith and keep living!!
After I raised up to 325k trading with her I bought a new House and a car here in the states 🇺🇸🇺🇸 also paid for my son's surgery (Oscar). Glory to GOD. shalom..
I'm from a poor background and my parents have struggled all there life. I wish to give them a happy life with all the strength I've got in me and this is what I have been looking for. I prayed yesterday that God should help me conquer this hard life with great connection and this is a sign that my prayers have been answered. Praise master Jesus 🙏🏻🙏🏻
This is by far, I mean MILES, the best opening to a video! Every time I watch this channel, it makes me laugh. It's straight out of my childhood sitcoms of the early 80's good.
I love all your videos, you turn all these old forgotten gems into.... well Gems. I agree with the other commenters that say this is the best restoration channel on TH-cam. I wish you had more time to create more content. I know its a lot of hard work, and a lot of it we don't see but it must be a labor of love because you do it so well. Your videos are very satisfying with just the right amount of humor✌
You're getting pretty good at these cranky old engines. Nice work! As always, the clanks, grunts, bangs, and occasional outburst are the perfect soundtrack. Can't wait for the rest of this beast.
Espero con ansias la segunda parte de esta restauración, como siempre es todo un placer ver tu trabajo y una motivación para este administrador. Saludos desde México.
Muito impressionante a engenharia desse motor, nunca vi nada parecido aqui no Brasil, parabéns pelo belo trabalho de restauração e pelo vídeo incrível.
![1920s Lawn Mower [Restoration] - Part 2](http://i.ytimg.com/vi/lT78wTJtX4M/mqdefault.jpg)
![1920s Lawn Mower [Restoration] - Part 2](/img/tr.png)
![1920s Hobart Coffee Mill [Restoration]](http://i.ytimg.com/vi/iM6wQkyx0Q8/mqdefault.jpg)
![Triple-Piston Pneumatic Circular Saw [Restoration]](/img/n.gif)
This is the first engine I've ever restored that has depression and truly hates all its original parts. Also, subtitles surprise!
Have really enjoyed following this on I and G with the mini updates. Thanks!
This restoration seems to be extremely time consuming. I got anxious just by watching the recap...
Me too engine, me too
Do you think it didn’t like you touching it?
Loving your videos. Just wondering how long it took from disassembly to Prozac perfection
I think I speak on behalf of all the folks here when I say: "Yes, Eric, we have enjoyed watching this restoration". Thanks for posting, well done!
Glad you enjoyed it!
Probably run better without that carb heater choking it.
@@HandToolRescue Always do. :)
@@Stefano-86 Absolutely well done!! Always great to what comes from your shop!
@@HandToolRescue as any and every time we watching your vids, mate! Love the humor. You remind me of my best friend, which is not with us anymore. Even my kids love to watch HTR!
"It was reverse thread the entire time"
I love it because it is exactly the kind of shit I would make a mistake on.
Trump2024
I was surprised he didn't go that way. Even if it wasn't, sometimes a good wrenching tighter can help remove stuck parts. Works for me a lot.
@@dixieduffy7yeah, just tighten until the threads are gone!!!lol
@@tonymaurice4157- Go back to Russia.
Those are the times when I would say, in a low, slow, gutteral voice, “God dammit!”.
Wow! A multiplayer sandblasting cabinet!
A veritable threesome of suffering
Coop! 🤘
It's a poorly kept secret that HTR hosts sandblasting threesomes on the weekends.
Why sandblast alone when you can sandblast with a friend?
It's for giants too. (or is HTR a minion?)
:p
No nonsense, no music, no chat, perfect restoration. With the added comedy, love watching you work. Thee brings a smile to my face
try turning on the subtitles for added character and charm
You have a knack for finding tools that look like they may have single handedly been the inspiration for numerous consumer safety regulations being passed. You are brave to use them. I love it!
Can we all appreciate all the work that didn’t make the edit? All those fasteners and small parts must’ve taken hours behind the scenes and don’t go unnoticed.
also he has subtitles for the whole video, if anyone was wondering, insane effort on this one as always
@@happe114 I thought he stopped doing that. He hasn't had them on his videos for a while.
I was once complaining to an old plumber about the steel pipes I had in my house. He gave me the best advice I’ve ever received. Always start by tightening the pipe a little before loosening it.
.....im not sure if you're being sarcastic..(dang internet)
But if not, I'm going to start using this method....unfortunately....with mechanics (and especially old and rusted parts) if you over tighten something that was over tightened to begin with...your risk breaking it off. What a double edged sword....
You don't really have to visibly move it, if it is already quite thigt. But let me tell you if you have some sort of feeling for what a part can handle, you won't break stuff, that wouldnd have broken either ways. Yust doing this or change the direction a few times is definitely a livesaver of a trick.
it's pretty common knowledge in the car scene, I thought... especially for anything that's a bit rusty.
@@leewoodrough242 I do know it from the German car scene (cause I'm from there)
@@mUnky889
I learned that by fixing cars and in fixing free stall loops at the dairy. Things get rusty, and your happy just to have it move a bit in any direction. Gets difficult to turn, and you just go back a bit. Use oil, but the heat from friction even helps.
Easily the best restoration channel on TH-cam - humour, actual siezed parts, and no disassembly with surgeons tweezers and magic - the subtitles were great 😂
Yeah 😊
I work on clockwork mechanisms as a hobby and I feel like an absolute tool every time I place a wheel or a bridge with tweezers, even though that's actually the best way to do it, given the size of the parts.
Those people have ruined tweezers for me.
I watch Nekkid Watchmaker, and he uses tweezers to lift bridges and springs and tiny screws etc, probably similar for yourself, and granted, I may have been exaggerating for effect, but I was watching someone disassemble a giant doorbell the other day, in surgical gloves and lift oversized screws and nuts with tweezers - all a bit unnecessary - our man here has oil in his fingerprints and makes fun of falling for a lefty tighty curve ball - the awful smiling freeze frame on the intro, a good thud as his head lands on the sand blasting cabinet (how many people need to use a cabinet at the same time by the way 🤔 where is that from?). Great viewing every time 😀👍
@@robertramsey4929 Yeah, your doorbell guy is the "those people" I was referring to.
Real reverse-thread rage!
Old brass carburetors are mechanical works of art. That one is even better with the shellac coated cork float. Epic. Thanks for sharing.
We don’t get a lot of these videos because it’s obvious that they take a lot of time to produce. I have never missed a restoration video on Hand Tool Rescue. Always excellent.
the repeated smash cut to sawing through bastard parts really makes this video. Great sense of comedic timing.
Yes! At first I thought...'Ohhh hes gone to the cutoff wheel for this one.' '...aaand this one...' / 'Oh no...Eric no...Reverse threa.....awww nevermind'
I applaud your tenacity in not only taking this apart, but putting it back together. Bravo to you sir.
I've been watching this channel for a while, and I'd never imagined myself doing this sort of thing. But now because of my job, I'm seeing literal tons of great quality old tools get recycled every week. I've started grabbing and setting aside things I know I could fix. So far mostly 70's power tools that just need a new cord or new brushes. Figure I'll clean and refurbish them as best I'm able, and throw them up on eBay if nothing else. Honestly, I just like how old tools look, and I'll probably collect a lot of them.
Do it, do not put it on a back burner, DO IT! You will get the odd scumbag that will steal the items, but mostly you'll be selling to good people that love older tools. Good luck Sir/Ma'am.
I agree with you about old tools.
I've bought some very high quality used stuff on ebay.
This channel also inspired me to restore my grandpa's wilton vise (had to watch several other videos to make sure I was doing it a good service)
It really feels like this one had it in for you; everything that could go wrong seemed to go wrong! Thanks for the thoroughly entertaining videos Mr. Hand Tool!
Trump2024
@@tonymaurice4157 Really? Asshole.
I'm a self proclaimed "Small Engine Nut"
The craftsmanship and engineering in these old motors are so fascinating.
Recently rebuilt a 1949 Evinrude "Speedifour" outboard. Opposed 4 cylinder, 33.5 hp!
I think you'd really enjoy some of the 40s and earlier outboards, before cowlings came into style.
All the bits and bobs are out in the open, exposed flywheel, and myriad knobs and levers on the front.
Still the best intro of all time
That intro never gets old
Totally agree.
Trump 2024
@tonymaurice4157 what does Trump have to do with a Canadian fixing a lawnmower with a cool intro song?
@jeffreyshepherd8488 I can post whatever I want this ain't the internet police. Free speech!
An engine that old and with minimal effort it fires right up. Just clean points and new spark wire. Amazing.
The brazing work on the cog @32:04 actually made my day. Call me old fashioned, but that was blissful. A perfect accompaniment to a glass of wine and a cigarette at the end of a long day.
To me, this is one of my favorite restorations I've seen you perform. You took a100 year old behemoth monster completely apart and rebuilt it to last another 100 years were it in steady use.
I've been tasking engines and carbs etc. apart since I was about 8 years old. Sometimes got them back together too, without a camera to record what I had done. I am now 80 yo, and in all these years I don't think I have ever seen a more complicated machine. No matter what part of it you attack, it has more parts than anything I've yet seen. Wow! Those guys really had some imagination. You've improved on that and brought it back to life as a work of mechanical art. SO WELL DONE...of course. That's a piece any collector would envy.
This one really makes me appreciate what you do to entertain us on youtube. There were so many times in this video where if I had been doing it I would have walked away and trashed it but you just power through. Great video!
Great video showing CRC products!
CRC makes great products.
I hope if you haven't sponsored this channel already, that you will consider it. He's definitely putting your brand in front of a lot of people.
@@QuantumLeap83Read the video description. ;)
you guys should sponsor my turbo bmw k1100 build, I need to wrap my fairings and crc livery would be great, I run a mechanics shop in cda idaho!
@@mitchellmanson449 1-800 number is the place to start?
You dont understand how much I love the intro of you smiling and then looking around and smiling again❤❤❤❤❤
I have an odd appreciation for older lawn mowing machines, this one is very interesting.
Looks like an ancient greens mower. High quality , thanks for bringing it back.
Ah, the dreaded reverse thread. You have to love "those" projects that just fight you every step of the way! Great video sir.
Dude the engine is a beautiful thing for sure, very cool to see it done up like that. Great choices.
I love when someone else knows what they are talking about when it comes to lifting heavy thing, you also need to do your best to keep your legs out of it entirely.
no you are supposed to lift with your legs not your lower back
And remember to keep as far away from your body. 😁
@@kylecarmichael5890 by using your lower back it can cause a herniation of a disc in the lumbar spine
@@kylecarmichael5890 and twist in a sharp jerking motion
Indeed. It’s that sudden awkward jerking motion that really gets the job done.😂
In addition to the obvious skills shown in this video, the sound effects - and the overall sense of humor - are simply outstanding.
What a big, longlasting restoration. Well done great work. Best wishes from Germany
I never thought to put captions on before, but boy am I glad I did! The prose! The poetry! It's magic
Very interesting use of those clamps. Never thought of that!
Eric is a master who can figure out any detail! Golden hands! I take off my hat..
To say that was the most complicated restore would be a gross understatement! Great job, as always.
I like that you don't sand, file, polish, grind, and body fill every bit of character and originality out of most of your restoration projects except in the most rare of cases. These are truly restorations.
I'm impressed that your watch has survived so long without being smashed.
Who says its the original and not the 10th replacement
I once restored an old rototiller, very old, and I had many of the same problems you encountered. You did a wonderful job on that old, old engine and applaud you. Great work.
You could fly to the moon with this thing...
Gosh i love this channel! I really enjoy the opening credits, it never fails to give me a chuckle. I really enjoy your humor and the fun you seem to have editing this vids. I also love the real work you do on these projects, nothing fake here.
What a heartbreaker to see that those gears were threaded on. I don't know how you could have known that. This machine must have been fabulously expensive in the 1920's.
Read the description. This would be around a $7,000 USD machine today!
You are by far and away the best restoration video maker other there. Thank you so much for bringing these wonderful items back to life. Please keep doing what you do so well. My very best to you and yours.
I have watched this channel for a long time and really like it. I appreciate everything you do by getting these really old tools looking and working new again. But it’s just a shame that so many people on TH-cam rip your concept off they are doing the same exact thing and it’s identical to what you do, but it’s OK. I consider you the OG.
amazing how you can put back together all those parts, great job.
What a nice way to start my Sunday, nothing says sit back, relax and enjoy your breakfast like a narrated HTR video 😁👍👍👍👍👍
One of your best. What a machine made when men were men and lawnmowers were built up to a standard. I still run a vintage UK built ATCO!. Hope to see it in action on the next episode. Best wishes from the UK and thank you for posting.
NOBODY EXPECTS THE REVERSE THREAD INQUISITION!!!
Incredible ! I can't waint to see it in the mower.
Engine probably has less power than the drill used to start it but dam that's a beautiful piece of engineering
Greetings from Drayton Valley Alberta Canada 🍁Miss your work Eric, please keep the vids comming. Love all the old stuff you find
Who’d a thunk they’d of reached out 104 years to put the screws to ya by threading that sprocket and gear onto the shafts. I guess screws and shafts come with the territory when you’re restoring antique machinery. Love your channel. Your work is amazing!!👍👍
That mower was sent from heaven to teach you about your new self and to let go of your old self 😂❤ Your pain saves thousands of us from vast amounts of pain and suffering… and your lessons are well headed, eg painting on rust.
the angle grinder of frustration should be a new channel main character
Simply amazing 1933 reel mower my first ever seeing one. I got lost on the points yet everything seems straight forward. Always enjoy your content and humor keep up the fantastic work.. 👍🏼👍🏼
The stream of consciousness subtitles throughout are incredible, but the ones around that reverse thread felt extra unhinged.
Seems like a very complex machine for its time. Awesome restoration. Thank you!
I didn't realize this was a "Part 1 of ?" until the video ended abruptly and I re-read the title - I was expecting to end with grass getting cut. Silly me for not noticing that's it's just the engine component restoration in this one.
I'm still gonna like and comment on this one even though I prefer the narrated videos.
Yes!
Always lift with your lowerback in a twisting and jercking motion
Turn on the captions I’ll explain what he is doing
@@Fennec1370 But you don't get his sultry voice overs
@@DeadReckonhe has the voice overs for patreon supporters. He knows what he’s got. 😂
I haven’t commented on any videos yet, but to the maker, you are the best at rebuilding and adding noises to film edits. Thanks, that’s what we like to hear. And good job, all of your restored items are great. I appreciate the detail and paint and the maple syrup humor.
- What is your working bench made out of?
-Hand tool rescue:
Yes!
if it ever catches on fire, the flames will be visible from space.
It's practically rot proof at this point from all the oils and grease soaked into it. I bet he could set it outside and his great grandchildren would still find it sturdy.
It's beautiful and yes, it was incredibly entertaining watching it get there. Thank you Eric, for another awesome restoration!
Now that's an overengineered lawn mower lol
It is so amazing how something as complicated as this lawm mower , could have ever been designed to work. Great job at restoring it. You have a part of history and a work of art. Hope to see part 2 ?
I don't think I've ever experienced adult ADD in Closed Captioning before. I fuggin love this channel
Top notch video, it was a pleasure to watch, thank you for taking the time to record and share 🇨🇦👍👍
That was AMAZING!!! (as always :D ) - You do SUCH GOOD WORK!!! And I just don't know how you're able to keep track of all the parts, or know how these strange things work, or what the best replacement part should be without using modern materials (as in replacing the float and still using cork, but coating it it with a gasoline resistant material... I would have just put on a modern float lol) - You are ONE OF A KIND and I LOVE YOUR CHANNEL!!! (I just wish I wasn't unemployed and strapped for cash because those wrenches are SWEET!!!)
THANK YOU for the AWESOME Video, and I CANNOT WAIT to see the work on the Mower Body!!! GOOD LUCK!!!
If you read the subtitles starting where he's machining the cork, you'll discover that he also ended up using a modern foamed plastic material to remake the float, because the gasoline resistant material wasn't.
I will always be in awe of someone who can take an engine apart, put it back together and... get it started again. Sincere congratulations !
(Google traduction, I am french 🤪)
Turns out the "increasing anger" in the intro was for the viewers screaming "Reverse thread! Aaagh!" the whole time.
This was a incredibly intricate restoration. Using the red gasket paper makes it more period accurate in appearance. Great work once again!
I raised 75k and Christina Ann Tucker is to be thanked. I got my self my dream car 🚗 just last weekend, My journey with her started after my best friend came back from New York and saw me suffering in dept then told me about her and how to change my life through her. Christina A. Tucker is the kind of person one needs in his or her life! I got a home, a good wife, and a beautiful daughter. Note!:: this is not a promotion but me trying to make a point that no matter what happens, always have faith and keep living!!
WOW😳🤯😳 Ms Christina Ann Tucker is the real deal if you're a New Yorker you'd know her too!!!
After I raised up to 325k trading with her I bought a new House and a car here in the states 🇺🇸🇺🇸 also paid for my son's surgery (Oscar). Glory to GOD. shalom..
I remember giving her my first savings $20000 and she opened a brokerage account for me it turned out to be the best thing that ever happened to me.
I'm from a poor background and my parents have struggled all there life. I wish to give them a happy life with all the strength I've got in me and this is what I have been looking for. I prayed yesterday that God should help me conquer this hard life with great connection and this is a sign that my prayers have been answered. Praise master Jesus 🙏🏻🙏🏻
Hope you had a good summer... love the work you do, and your sense of humour.
I grew up in the 80's and the start of your video cracked me up. I felt like I was watching an 80's sitcom.
This is by far, I mean MILES, the best opening to a video! Every time I watch this channel, it makes me laugh. It's straight out of my childhood sitcoms of the early 80's good.
The most complicated rebuild yet. Impressive!
My day immediately improves when I see a HTR video on my feed!
Love seeing old bits of kit being given another go!. Nice one! Nùff said. 🙂
Next level restoration! You took apart shit I would never had attempted! Can't wait for part 2 finish!
Thanks for this one! It brought back an old memory, which you may like. He had this giant Craftsman 3/4" steel drill that he used to start our mower.
What a beautiful engine! You did a fine job bringing it back to life
Top notch video, beautiful - if terrible - machine. Hearing that engine at the end ... I'm very glad all my neighbors use electic mowers.
This should be a Tuesday night regular 1 hour series. I will even tolerate the ads. Always great information and entertainment.
Absolutely an amazing testimony to your determination to make things right. This is a true museum piece! Can't wait for more.
I love all your videos, you turn all these old forgotten gems into.... well Gems. I agree with the other commenters that say this is the best restoration channel on TH-cam. I wish you had more time to create more content. I know its a lot of hard work, and a lot of it we don't see but it must be a labor of love because you do it so well. Your videos are very satisfying with just the right amount of humor✌
An absolutely fantastic restoration video 👍👍
Another wonderful gizmosity from yesteryear! Great job Eric! ❤❤❤
This one was something. Glad you stuck with it.
You're getting pretty good at these cranky old engines. Nice work! As always, the clanks, grunts, bangs, and occasional outburst are the perfect soundtrack.
Can't wait for the rest of this beast.
Espero con ansias la segunda parte de esta restauración, como siempre es todo un placer ver tu trabajo y una motivación para este administrador.
Saludos desde México.
I love your TV show. I mean, that's what it is. You take me back to a simpler time in life. Thank you for that. 😊
I love watching your channel. You are just brilliant at what you do.
I love how primitive tech or whatever does silent videos with subtitles because I end up watching every video twice. I hope you keep this format.
Absolutely love the machine and your job to restore it ❤
That turned into a Misson. What a ballache. Knew you'd beat it. Great video
Muito impressionante a engenharia desse motor, nunca vi nada parecido aqui no Brasil, parabéns pelo belo trabalho de restauração e pelo vídeo incrível.
What an interesting little engine and what a painstaking rebuild. Thankyou
Craftsmanship and engineering at its finest…. And really entertaining! Greetings from Eastern Ontario
Happy you brought back the captions. Was my favorite part.
Your videos are the best!! I luv that you leave your frustration grunts in them, you’re very funny and talented with your hands!! 👏👏👏✌🏼😎
Can’t wait to see you finish it !
You should have a museum for all the things you restored!