0 | You can build a drone with less than 40 components
ฝัง
- เผยแพร่เมื่อ 31 ต.ค. 2022
- Full code and manual on GitHub: github.com/CarbonAeronautics
Quadcopter frame PCB on OSHW lab: oshwlab.com/droneer/Carbon-Ae...
In this video, you will explore all components of your quadcopter drone, and you will learn how to design your own frame printed circuit board (PCB) with EasyEDA.
The purpose of this video series is to learn the basics behind a quadcopter drone and enable you to build one yourself, by dividing this challenging project in several easy-to-understand parts. You use the capable Teensy 4.0 microcontroller together with the easy-to-use Arduino language. - วิทยาศาสตร์และเทคโนโลยี
The PCBs and parts have been ordered. Thank You for all the hard work you put into the information presented. Frisco, TX
where i can buy the PCB and the components?
@@_onlyme_ Its an inhouse design pcb ig so you could try for some org who manufactures
really good tutorial, thank you 👍
This is going to be my next DIY project! Thanks. Really like your tutorial.
Did you complete it?
Hi I'm trying to order all the parts, but most of them are discontinued. Could you provide an update list to buy the parts? Thanks
Alternative to the motors? these are not for sale anymore?
Great project!!! how can we add a camera to this ?
can we use another motor because its out of stock everywhere
if yes which one??
I feel like if I get familiar with this I can start making custom drones and other things
I have used all the code from his manual, not GIT Hub. He shows you to build the drone in sections before placing components on the board because you are testing each component and learning before soldering all parts on the drone circuit board. Very important because the drone is a balance and complex system.
Hi, How much did it cost to build?
@@ahmedshahabi5311 Yeah, so actual question.
Where are the parts listed because you're one of the people who followed the course
All in his manual@@Ibloop
What is a good alternative for the GEPRC GR1105 5000kV motor? I can't get them in Europe
Can you recommend another 12A motor the one 1206 is sold out everywhere
Hi! I uploaded the BOM but get an error about "Repeated designator". I played around with the BOM column names a bit, but any tips on how to set this correctly?
All my parts are in. The building of drone has started.
Hello,
saw your flight video of the CarbonAeronautics on your channel, could you add some more flight videos?
And what do you think about the flying performance like stability and speed/acceleration?
Thank you
Hello, I am new to building drones and would like to know where I can obtain all the necessary components such as wiring and connectors for my first project.
Can the teensy be replaced with an Arduino nano?
It's surely a ridiculous question but, what happens if we use directly a voltage divider in the lipo battery in place of the ESC's BEC ?
the voltage of the lipo drops with the capacity, and when the voltage drops, so does the 5V output. i added an voltage regulator from the lipo rail to 5V. because esc's without bec were mutch cheaper.
Hi , I wanted to order the two motherboards but can't find a link to do that ?
a link please to order Lower and Upper PCB frames please
is any GPS RTK attachable?
could you please update the parts list
Can we use stm32 instead of teensy4.0?
Hello, I can no longer find ESC Turnigy Plush-32 6A from HobbyKing, it always has the status of BACKORDER and on other sites I can not find it. Can you recommend another ESC, which is found on the market? I have all the other pieces. Thanks so much.
The 12A version from HobbyKing will work as well, it is just slightly heavier (11.5g instead of 6g). Although I haven't tried it, you are normally able to use 6-15A ESC's from other manufacturers as well, just make sure it has a BEC of 5V such that you can power the electronics and the ESC is capable of handling a 2S limo battery.
@@carbonaeronautics
que
Salut
@@carbonaeronautics que
Hello, thank you very much for your outstanding work and provided codes and the awesome PDF document.
I was going to start the project and started seeking for the needed components. But I realized most of the parts are not available anymore :(.
Could you please update the alternative components.
Thank you very much & by the way could you please give us your PayPal, I think many people want to donate to honor such an excellent work!
push
Dude?
Any reason for teensy 4.0 and not 4.1 or even Pi Pico or STM32F4?
Mainly because the teensy 4.1 board is larger in size and it couldn't fit anymore on the upper frame. The project indeed perfectly possible with the Pi Pico or the STM32F4!
This is awesome, how much does it cost to build?
Circa 300-500€ maybe
0:52