I'm not a kitchen fitter but I installed a similar worktop myself after watching this - even though I was a bit unsure as to whether to follow this guy's tips, given that everyone was knocking his work. But he seemed like he knew what he was doing, so I took a chance, and do you know WHAT, all you bloody naysayers...! Yeah. My worktop turned out absolutely shite as well.
I don't like to talk trash about other workers, I don't know where he work either. If the customer or wife is happy, it's ok. But the thing I'd learn in this video is: I'm in a different level.
This is a good starting point, but it felt like the DIY/Low Budget method. I've been watching a few different videos today and this was the "cheap" way to do it from what I've seen. But if you're happy with the results then that's fine, I suppose.
As a professional quartz and granite countertop fabricator and installer, please do not do this. You void your warranty when you surface polish quartz.
Then your boss should learn about some countertops, this one on the video is definitely not a natural stone. Quartz it is. But the installation at all looks more than epic pornography, da fuck happened :D
Lmao 45 on that splash looks ugly never polishe the surface cut the Seam at and angle so it can close as much as possible and at least use white pads so the glue doesn't turn black doesn't hold the makita the right way to cut stupid idea of the 4 rocks and the clamps
I think these are put here so pros continue to have work after failure unfortunately everything is wrong from the way it was brought in to the very end. run on sentence
@@diegosalinas9463 no precisamente pero tengo 10 años instalando granito ,quarzo, marmol, porcelana.. Y el quarzo no se le tiene que pulir la cara a menos que sea muy necesario
I'm not a kitchen fitter but I installed a similar worktop myself after watching this - even though I was a bit unsure as to whether to follow this guy's tips, given that everyone was knocking his work. But he seemed like he knew what he was doing, so I took a chance, and do you know WHAT, all you bloody naysayers...!
Yeah. My worktop turned out absolutely shite as well.
I don't like to talk trash about other workers, I don't know where he work either. If the customer or wife is happy, it's ok. But the thing I'd learn in this video is: I'm in a different level.
This is a good starting point, but it felt like the DIY/Low Budget method. I've been watching a few different videos today and this was the "cheap" way to do it from what I've seen. But if you're happy with the results then that's fine, I suppose.
As a professional quartz and granite countertop fabricator and installer, please do not do this. You void your warranty when you surface polish quartz.
i wud like to learn from u
I would be fired if my boss saw me carry a countertop flat like that.
Then your boss should learn about some countertops, this one on the video is definitely not a natural stone. Quartz it is. But the installation at all looks more than epic pornography, da fuck happened :D
@@grungemon are you saying that you do that too? Come on man, you are kidding right?
I install granite and the best and cleanest way to do it outside so as not to make too much dust.
That song is what dreams are made of.
This is crazy. Not the right way to install countertops 😂
You’re not supposed to polish quartz surface 🤦🏻♂️
Exactly what I was thinking we don't touch surface with anything, crazy.
Really? I can match any quartz finish with my service renew pads and some time. Looks perfect. Just need the right tools!
You're just scared haha
@@deants5149 actually you void the warranty on every single product we carry if you surface polish it like that.
@@evanbremner65 you might be able to. But if the customer has a warranty issue, you've voided it. Read the warranty info.
Mate
What is the name of glue you were used for 4 pieces and other glue please
Ive been doin this 35 yrs and have seen an install like this
Nunca. SE deve de lijar la superficies basura de trabajo
All joints should be prepared in production not on site in a house causing dust
What you used to tick the granite sir...thanks
Please don’t ever do this again
Im crazy or this ppl have different tipe of pads that they can polish the face of stone 😱😱😱. Ppl never polish quartz face .🇺🇸🇺🇸🇺🇸
There is a thing called surface renew. Or donkey pads. They work wonders. But you better know what you're doing.
El pegamento conque era era. Pintura o silicon
Jeez. The music is mind numbing.
Lmao 45 on that splash looks ugly never polishe the surface cut the Seam at and angle so it can close as much as possible and at least use white pads so the glue doesn't turn black doesn't hold the makita the right way to cut stupid idea of the 4 rocks and the clamps
I think these are put here so pros continue to have work after failure unfortunately everything is wrong from the way it was brought in to the very end. run on sentence
yeah but this was also 6 years ago or smthn. completely different ways of installing now
SAME SHIT INSTALLATION RIGHT NOW W/THEM PEOPLE'S 🤷🏿♂️🤷🏿♂️🤷🏿♂️🤷🏿♂️....I NEVER UNDERSTOOD THAT KONCEPT OF WORK 🤦🏿♂️🤦🏿♂️🤦🏿♂️🤦🏿♂️
What type of glue is that?
ELMER'S SKHOOL GLUE MY FRIEND 😀😀😀😀👍🏿👍🏿👍🏿👍🏿
Why isn't that perimeter seam cut at a 45 LOL??
And flat lifting stone hahahah good luck even if is a quartz😂😂😂
Why is he playing Mario 64 music?
If
that joint is easy to see like a banana in a coal chute. The glue is not the right color ...why make this video if the result is really soso
This is the most ridiculous way to install a quartz counter. I’ve never seen such a black seam on a white counter top on my life smh 🤦🏽♂️
Lmfao right?? This colour is one of the easiest to colour-match and they still fucked it up
Se nota mucho la unión parece ser un mal trabajo
This is not the case, it is very easy to remove the finish from the stone is false, this video is a lie, they can damage your countertops.
All I can say to this video is….
Please retire, that is the most unprofessional install I have seen.
Shit joint work ..........have a go hero ............
Video muy profesional
Gracias por aportación
😂
What is the brand to fill the seams??
Looks like same shitty glue to make the seam look like shit after polishing. Do not follow this video.
Elmer's glue 😎
These dudes couldn't make a color to save the human race
yeah, don't ever do any of this
Y the hell did he seam that back splach instead of jus making it a whole piece? This video hurts 2 watch. Lol
What type of countertop ?
🫢
Hi, do you know the average salary of a marble worker there?
Hopefully not shit lmao. This is awful work
@@codyxisbell i like my job, i earn well here in brazil, no job is bad, the bad thing is having to work kkkkkkk
what .....
Please anybody watching.. this isnt how to do it... his seam is horrible. U dont even touch face or glue anything to it.
No...
Thank you very much!
Joint dikha raha hai
Todo eso muy mal echo
Tienes vídeos?
@@diegosalinas9463 no precisamente pero tengo 10 años instalando granito ,quarzo, marmol, porcelana.. Y el quarzo no se le tiene que pulir la cara a menos que sea muy necesario
Y peor con esas lijas . Te oscuresen la union
Me perdonan pero eso está todo mal
Orrible
Absolutely bloody god damn awful. 😂😂😂😂😂
That seam is so ugly dude
This video is a huge fail and will cost you alot of money do not do anything you saw in this video
please make a video i want to learn
Wrong
This is so wrong this is not for you
Terrible!
It looks like first time attempt to do this job.
Big amateur montage
Were a mask but leave the safety guard off the grinder,cowboys..
Joint ke liye kiya tnx uj karte hai
So bad
Hello, could you give me your hand phone?
Ok, no problem, hand phone is +86 13710532861 :)
Oppein Home Group Inc. thanks a lot
@@calvinnguyen3555 you are welcome :)