We FINALLY Have A Replacement Engine For Our 1934 Ford "Beautiful"
ฝัง
- เผยแพร่เมื่อ 21 พ.ค. 2022
- In the last update on "Beautiful" we found out the 59ab we had planned on putting in as a replacement had a cracked block. The engine appeared to be totally rebuilt but the block had a crack into a cylinder, and into the center exhaust port. Thankfully in our stash we have a 35/6 engine block that looks lightly used. Steve and Matt's Dad work on getting the water jackets cleaned out, and bolt on all the known good parts we removed from the original engine. Once the engine is ready to run, its time to fire it up and see if it will overheat. Thankfully the engine ran for 22 minutes with the shop fan and never went over 185 degrees. Time to swap in the new engine and enjoy the summer while driving Beautiful.
Wanna send us something?
Iron Trap Garage
PO Box 6
New Berlinville, PA
19545
Amazon Wishlist - www.amazon.com/hz/wishlist/ls...
Matt's Instagram - @irontrap - / irontrap
Mike's Instagram - @mhammsteak - / mhammsteak
Iron Trap Parts Instagram - @irontrapfinds - / irontrapfinds
Iron Trap eBay - www.ebay.com/usr/irontrapgarage/
Email us - irontrapgarage@gmail.com
Get Your Iron Trap Merch Here - irontrapgarage.bigcartel.com
Wanna send us something?
Iron Trap Garage
PO Box 6
New Berlinville, PA
19545
Amazon Wishlist - www.amazon.com/hz/wishlist/ls...
Matt's Instagram - @irontrap - / irontrap
Mike's Instagram - @mhammsteak - / mhammsteak
Iron Trap Parts Instagram - @irontrapfinds - / irontrapfinds
Iron Trap eBay - www.ebay.com/usr/irontrapgarage/
Email us - irontrapgarage@gmail.com
Get Your Iron Trap Merch Here - irontrapgarage.bigcartel.com - ยานยนต์และพาหนะ
Nothing like a good dose of Iron trap garage on Sunday morning.
That's crazy how quickly that engine fires, its literally one compression stroke and off she goes!
Sounds absolutely mint too
That is standard fare for flat head engines!
Wow, that engine WANTED to run. I love the look on Steve's face when she fired instantly.
Thanks
Morning Matt!!! your engine run stand has definitely paid for itself!! Matt, it's great of you to give Steve credit where credit is due...you still are his boss.....but.....be safe!!!! God Bless!!
Man you just won the lottery, that engine is running like new, it is impressive the way it start, idle and runs, I wish to see that in person but I am thousands of miles away, congratulations, I would like to see that toy running on the street, it would break anyone's heart, nice going guys, from the endless summer paradise Puerto Rico, Jesús Torres.
With those headers and the down angle, you will see water run out quick if you have a leak. Great sounding engine. Nice job guys.
Engine sounds great, can’t believe how quickly this engine starts.
All of you guys work good together great video ty Steve
Let’s hope the engine is a good one, certainly starts well. Engine stand is so handy for things like this. 🇦🇺🇦🇺👍👍
Listening to that flathead run was like a night at the Opera to me. Sounds like you found the perfect engine for that car !
Haha we love the sound too!
Fantastic! Sounds like the good old days, can't wait to come visit,the car deserves that engine. Thanks guys for the video
Thanks Frank! Can’t wait to catch up soon!
keep the great work hope you have wonderful day
Great job love the flat heads
Steve's the man that thing spun half a turn and bam fired up! 😳
Awesome work.
Love how you guys let people know it takes time to build these.
Keep it up. Love what you’re doing!
Thanks Mike we’re trying to keep it real!
Glad you found a good engine in your stash to use
Need to put steering on that and take it round the block.....cool !!!
Happy to see you're putting the early engine back in the car, I love those early engines! That thing is so original it would be cool to keep it as close as possible and enjoy it as is! As far as it burning a little oil, just consider it top end lubrication, it's a flathead if its not burning oil or leaking oil it doesn't have any oil In it lol
Matt- Mojo Speed Shop and Lounge
Your stash of "junk" is amazing. Lol. Love that all these parts and cars (some are keepers) you get are back in the game so to speak. Now others can build their projects and help the hobby. Fun as always!
Thanks Dale!
Looks like a winner the way it started right up. Here's hoping Beautiful will be back on the road soon.
Tht engine sounds beautiful I'm sure it is the perfect engine for that car. :)
I have missed yall so much since my accident on the 11 of May, head on crash. My body is starting to come around and should be back soon. God bless you guys.
Wow sorry to hear about that! Heal up soon!
CONGRATULATIONS!! That engine runs great, sounds magnificent and starts incredibly well! Great video for first thing on Sunday morning!
Good deal 👍a little marvel mystery oil will loosen the rings 🧐 the flatheads were amazing engines
Cool having parts on hand, "Flat Heads Forever"! Looing forward to the next reveal.
Very KOOL Sounds great Steve and Matt
The run stand was a fine investment of time and effort! The headers don't need to be pretty; just need to work!
That flathead starts as quickly as my 2009 Corrola.
Awesome. Glad you met with success with that motor. Sounds good too. I'd drive it.
Thanks for the new video! I enjoy each one you do.
Good morning from Seven Fields Pa.
Glad you found a good engine
Thanks guys. You rock!!
Love that "coffee-can" starter sound - engine sounds great - used to have one of those.
Matt and Steve,
That's one good sounding flathead!
Well done!
Nice job Steve and Matt. Nice teamwork. The engine sounds really nice I don't think you'll have any problems. Looking forward to the install. Rich/NJ
Good job.. Well done
Sounds good guys!
Hi Matt, That flathead sounds GREAT! Have you given any thought to mounting an electric cooling fan to the test stand radiator? Just a thought. I LOVE watching your videos, keep up the great work!
Great job 👍
Awesome tune up
Awesome content...
That car is so awesome and I wish I could have it after you get it done. Let me know what you are thinking of doing with it when you are done. Great day to you all and I hope that you have a great morning and enjoy your day.
Thanks John! The car will be for sale end of this summer or in the fall. If interested you can email: irontrapgarage@gmail.com
Good job
3rd time is a charm
Should read Ardun conversion.
My Dad had a 48 Ford 2dr sedan that started also with only ont half turn. Yeah she was sweet. Didn’t burn oil either. Yes !!!!
Check the distance to spot ratio on that IR temp gun. The further away from a target you want measured the wider the reading area.
Hope my '49 fires up that quickly and easily
Typical old flathead,1st crank was a hereditory for them, Dads 39 mercury started at 20 below 1st crank with full choke . loved that car also the 48 merc coupe I got my license in.
Is that Dave Attell ? 🙂
Lovely! I did see some water leaks during the intro. Seemed to be leaking from the top right water outlet? Saw one or two drops.
Yep needed some tightening down
I’m not knowledgeable about running on an engine stand. Is there a reason for no fan on the engine or no electric fan on the radiator? So glad it’s going well and look forward to seeing it installed and running down the street.
This engine the fan is on the generator and would have hit the radiator. Some other cars we put one on. We put the swamp cooler shop fan in front of the radiator when we want to run it even longer to keep the temps down
@@IronTrapGarage hey. Thanks!!
I need a good 37 motor
it looks like you have struck gold with this engine. It will be a good match for “Beautiful”.
will Beautiful get the Columbia 2 speed rear end this go round???, how about a Southwind Heater too. and a 34 Radio
Nice Video.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
What have you dome with the Derum conversion you were having done.
I have a 8BA engine bored 60 over. Would going to a double carburetor intake give me a little more power? Especially for hill starts?
Would need to do a cam as well to notice much difference
@@IronTrapGarage what about aluminum heads instead
Aren't you concerned about the damaging effects of idling the engine for so long? Especially upper cylinders but also bearings due to low oil pressure.
You can increase the revs and get it up to temperature much quicker without the unnecessary wear.
NOT that the flatty s not sounding sweet, but some Old Harley mufflers would be Good for reving it up and stuff.
Some fishtail upswept pipes would be awesome. Lol
Put some old MC muffs on the header's and give your ears a break 👍
Sea Foam fix a sticky piston ring. Dump a little Seafoam down the offending cylinder. th-cam.com/video/ttd93j4lih8/w-d-xo.html
So..you've got a water pump how many years old?
And you test run it dry ?
That water pump was in beautiful running days before…
@@IronTrapGarage GOOD !!
this means you can run it dry !!!
Liquid no matter it's viscosity will cool and lube contact between moving parts.
Have you ever seen a carb or fuel pump start working once soaked in gas ?
@@IronTrapGarage yet it was run DRY.
Im NOT beating you up.
I'm NOT trying to win.
The ONLY point it,
Don't run stuff "dry".
If you don't,
I won't win,
YOU WILL !
Now put it in the car.
I’d say that’s the obvious next video…
Ca
Holman and moody might fix your cracked engine.
The fix rare muscle car engine s the have been windowed by a broke rod.
Because of number match
Second!
I found out the hard way, if a flat head 8 cylinder engine gets an internal crack, there's no way to repair it.
Gee with all the speed accessories you have on hand you think you might of hop it up a just a little.
This isn’t the car for that.
@@IronTrapGarage you could of made it a sleeper
FlatHeads are coming back !
Videos way too short moon
I'm first