Building My Own Step Notch For $50! Jack Black Is Gonna Be LOW AF!!
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Putting together a step notch for Jack Black. The tubing was about $30 at Ace and the square stock was $20 at the local steel yard. I just like building things.
Why didn't I just do a C-notch? Check this out. Food for thought.
talk.classicpa...
Merch Available!
teespring.com/...
Instagram @snidertron3000
The music I use in my videos is made by these rad people:
/ the-chemist-10
/ dcuttermusic
/ coreygagne
/ dogjames
/ joakimkarud
/ dyallas
/ kevin-9-1
/ julianavila
/ safakash
/ andrewapplepie
/ ukiyoau
Your dad loves that torch more than anything lol AWesome notch kit....saved $$$ and so much stronger than most
Man a hot wrench makes so many jobs easier
Another episode of OSHA violations.. but I love it!!! Keep the videos coming. I have a 94 6.0 swapped and always enjoy seeing what you guys are going to do next.
Gotta have over 10 employees to meet OHSA requirements. Shops smaller than that are exempt.
Listen to your old man. Looks awesome with the front end sitting theway it is.
I just can't do it lol I do want to build a gasser someday, but this ain't gonna be it lol
I have seen just about every truck out there get a step notch before. Many I have done myself, but every time I still get all giddy like a lil girl when it's done! I love how you said need to trim the bed floor a bit, most would think die grinder maybe a lil hand held electric one. Nope! Not your dad! He busts out a 12" spinning wheel of metal be gone tool!! LoL you guys did an awesome job on it!!
I plan on doing a C-notch to my race truck. Mine is a 96 Ram long bed. It's also a v6 auto currently but is getting a 360 swap real soon. Watching these videos (even though these are GM and mine is Dodge) is really inspiring me to get mine started. I'm thinking drop spindles up front, axle flip and notch the rear. Engine and trans swap. Maybe a procharged or a Cummins turbo...but either way thanks for the motivation.
If you want to get rid of that rust on the frame try using rust converter primer, I highly reccomend it did it on my 92' stepside. After you can coat it with paint to make it last longer.
Almost ready for a 4 link set up lol. A few brackets,tubeing and hime joints.
I remember bout 8 ish years back, I helped a buddy build the frame for a 84 ram. Bags, full back half, links, custom frame.Had the help of lazer cutter though. Just a big puzzle lol. Anywho, thats gona be looking sweet when your done.
8:35 for the money shot, right in the face. Lol. Awesome vid, maybe I'll grow a pair and finally cut mine up. Thanks for posting.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✋✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✌✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝☝👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👋👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐👐
Holy shit that was a workload. Dads the fckn MVP of this one I have to say. First of all coming at us with the most wicked torch skills I’ve seen, then out of nowhere just wielding that gigantic cut off wheel like it was a 3 incher, followed by the fact that he didn’t even stop for his smoke break taking the dart along for the fckn ride my god
All they needed was a torch and a Chicago welder !!! Beat that Jesse James!! You gentlemen earned my respect ✊!!!
Love what you're doing. I've got a 92 fleetside that i just dropped a built 489cid bbc into. I can't wait to start beefing up the drivetrain then suspension to hit the 1/4 mile. I'm hoping to get it under 4,000 lbs and get into the 10's with it.
Now that's top Notch fabrication. Anytime Captain Inferno make an appearance, the project will be a success.
Have you considered to make an aerocap for the bed to get rid of the air pocket that trucks have behind the cab? I'm sure you could do it pretty cheap and end up gaining from it somehow. Idk just a thought . Keep on kicking ass 👍🏻🔥
Dude it tucked the monster truck tires very nicely, looks so good,
I love it. Great montage of sparks and pretty blues. I like how you think outside the box and get this stuff done on a budget. Good and functional.
Hell fn yes!!!! That thing is sitting Tight! Great work guys.
Best video yet very impressive guys great work
I love the way it looks especially bein a step side and lowered looks 10x better in my opinion. That thing is dirt nasty low lol if I had it and it was lowered like that id have to get me some baby moons and put on it
Talk about nervous We cut a brand new at the time 2018 f150 frame to c-notch it because a kit wasn’t made yet. It was for a disabled man who had to use a wheel chair. The truck is waaaay low.
The fire chief love that fire ax. Your dad is a machine with that. Love it.
Nice job. What do you have for front lowering so far? Dropped spindles and coils put the bottom bumpstop a millimeter from the frame. Gonna need a smoke wrench solution for the front now.
So badass brotha can't wait to see her going down the track!!
I’m sure you got flamed in the comments already but you never wanna cut the frame until the notch is pretty much installed and welded for integrity of the frame and use A saws all or cut off wheel for a cooler method other than blow torch
I had to go back and rewatch to make sure, but you can see in the video that I get the notches like 80% welded in before the frame is actually cut, on at least 3 axes. Torch isn't gonna hurt the integrity of the frame enough for me to worry about and its much cheaper and faster than a cutoff wheel. This truck has lifted the wheels since this was installed, its plenty strong.
Doctor Dad-structo does some good work! And you, too! Looks amazing. Can't wait to see it all done and rollin' down the road. \m/
Man that looks amazing!! Some fresh paint and some headlight/taillights would make this a real head turner at the track!! But I still love the look of it now man. Y’all did a hell of a job!
I like it with those wheels I think they could use center caps and it’ll look sick af once the front is lowered
I love how it sits now. I would probably leave it like that
This video is a great way to start the week! Looks badass.
Looks good especially if you've never done it before. I kinda like the stance and should help weight transfer
Milk crates and a sheet of plate as your wilding. Crazy, hey man whatever works brother.
Awesome job!! Looks much better.
Damn homie nice build you have going on. Love your vids. Keep up the good work man.
On a side note how much would you charge to send a c-notch made by you out to FL 😎
lol how much you willing to pay?
Would you LOOK AT THAT!!?? Just LOOK AT IT!!
What tire size on the back your runing? Innthe video?looks great man
That came out absolutely beautiful
Love watching the progress on Black Jack man, been subscribed since you got it! Always have had a soft sport for OBS trucks and you’re giving me great ideas for a future project of mine
Yessss
To I saw video that you have to lower the truck before you notch it to find the center the frame I am working on is stock hieght at the moment do you know if this is true to put on the lowering kit first before I notch it
That looks sofa king bad ass!! You guys did an amazing job. I can't wait to see what's next.
Tjats gonna look good af
Ebay 4 link with bags delivered start at 200 bucks just so you know 👌keep grinding its really starting to come together
Hi what is the exact measurements you used?
Truck looks awesome. Good work keep it up.
I am getting ready to do the same thing my beds all off just been waiting for you to do yours so I can get a idea now I can start cutting her up thanks great video
I cheated on the bars. They're all 30 degree cuts. Worked out really well lol
Dude y'all kicked some serious ass on this!! Great looking fab work!! Looks like you have done several. Very impressive!!
You mean it's bad to weld Mig with Tig gloves? Guess I'm doin it wrong! ha ha ha
My favourite part was when he tried to put the fire out with a spanner 😂
Awesome
they make a set of wheels that look identical to weld pro stars but they're knockoffs and alot cheaper!! but they're seriously identical! those would look so killer
That looks so fucking sick man!!!
What materials did you guys use ?
How much clearance does that notch give you
Pops is a surgeon with that flame wrench. Nice welds, maybe not “Instagram hard”, but It was enough for me
Yep weld beadlocks will be epic on this thing
Your dad and that chop saw blade again, reminds me of my dad
Another question, sorry lol, but with just the flip and notch, how much did it lower it?
Just a flip kit is usually around a 6" drop
You guys killed it you dad don’t play lol truck looks sick af
Put a fleet side bed on it bro. Looks badass tho.
Two maniacs at work! Love your vids and good luck with the rest!!
Your Dad is awesome Josh; his motto is go with a big disk or go home. lol
Gotta love dad he be game for what ever,you should do something special for him ,just a thought great vid as usual
Well, I mean I am gonna let him drive the black truck. That's why we went with the small block instead of an LS.
Take that pride baby
How did you cut the finders with and wht did you use
Great job looks awesome
Time for a 4 link and a panhard bar and coilovers! He's starting to look like a bad mammer jammer guys
Josh where did you end up putting the rear shocks at
Where side pieces of the notch the same dimensions as the top metal piece of the notch?? I’m going to try this at home and I wanna be sure before I try
Yeah, the way I did it they were all the same size and all cut at the same angle
Don't give a F**K if I'm first or not! Happy as F**K to be watching another SNIDERTRON 3000 video!
Great job bro! You did some sik welds too! 👍🏽🔥💯
That looks awesome man 👏🏽 . wish you could do mine like that 👌🏽
Killer!!!!
That truck just needs a diet and time for the track
Did you all put the leaf springs under the rear end and flip the u bolts?
Yeah, I think that's what we did
SniderTron 3000 I ended up watching the further videos and they answered my questions lmao thank you
Very nice.
Yall definitely take some pride in yalls work,,badas work n project yall have man,, definitely take the meaning (backyard engineering) to the next level!!keep up the good content guys,if possible give me a shootout @EnriqueGarza been following yall channel for a while now 😎
Great fabrication skills.
Yal did a good job on that
Looks great!!!
I love it! it looks really good!
Sick!!! It's making me miss my old truck lol same low but it was a striaight bed
The ol man is gangsta as f#%k !!! I always enjoy the vids Brutha ! Sitting NICE !! Fa sho !! Hey real Talk you was oozing with PRIDE there for a bit !
Ol man liking that Cali Lean
That’s sweet great work!!
“It’s not going to make anyone on instagram hard.” Lmmfao🤣😂🤣😂
It’s sitting nice 👍
Looks real good 🤙🏽
looks great man
Lol if you say let's build a space ship dad be like let me get my tourch, gotta love him
Looking awesome !!!!
Sick af
You guys are awesome
1. JB looks sick!!!!
2. The look on your face when you first dropped the frame!
3. I cringe every time i see Papatron with that fricken death-wheel!
I was watching the blade on it the other day and I can't believe it hasn't come apart yet. He had that thing flexing like crazy!
@@SniderTron3000 CRAZY ain't the word for it! Haha
JB is looking good man, now you just need to find a Kyle Gass and you will have the greatest band in the world,lol.
I think you did a great job
when you say you cut the fender.. what did you cut because my 95 rubs and i’ve just hammered it out cause i’m scared to put a cutting wheel to it
The fenders on the step side trucks are fiberglass, so the lip you hammered I just completely cut off. You might want to just rent or borrow a fender roller and pull them out a touch. Or do like I've done in the past and use a baseball bat and have someone drive ahead slowly lol
SniderTron 3000 i’ll try the bat method or with a piece of tubing thanks 👍🏼👍🏼
Cool stuff man 👍😎
Hey that looks awesome and it is going to hook so much better now can't wait to see the track video...your the reason im starting my youtube channel
That's awesome, man! Can't wait to check it out 🤙
Looks sooo goodd
Nice work
👍
Sniddertron 3000 sr. Sure loves that torch
Sick welds bro!