Cold Start 5HP Briggs and Stratton MTD Garden Tiller -- Tilling the Garden - April 13, 2013
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- First start of the year for the 5HP Briggs and Stratton MTD Garden Tiller. Its MTD Model # 212-390-000. Had this for a quite a while an overkill for this little garden but it has been used to completely redo the yard, flower beds and use as an aerator during the fall grass seeding. Does a really nice job, got tomatoes to plant, cucumbers and squash will come next.
I've had this about four months and have found it to be an aggressive and powerful rig. th-cam.com/users/postUgkxjo0FLo5z3Y_qUcT3vSlOqpMaMdFjvsXa I've used several others in the past and the Sun Joe surpasses these, easily. I note that several people have commented that it bounces on rocky and compacted soil. I believe that would be the case with all tillers - the ground does need to be "broken", either with a larger tractor type unit or with a shovel, and rocks need to be removed. I'm living on a Pike silt loam here in the midwest and the Sun Joe turns my garden to bug dust in two quick passes. I use a technique where I do a short 2 foot run then pull it back and let it go over it again.
Thanks for sharing. Just revived a 1997 yard machine. Runs like new now.
Just seen this video having just got back into gardening after a lot of years and intend getting a new rotavator. Its been 40 years since I used a petrol rotavator but if I remember the rear wheels should be taken off a front Tyne rotavator prior to use and the drag bar used for cutting depth and speed of cut, as fenderstratguy says the drag bar is upside down. but an educational video. thanks.
It's great to watch all these videos of you starting up all sorts of equipment with various engines. Super educational!
Hi Alan thanks very much that's pretty good for a 40 year old Tiller. Must be one of those gear driven ones that will last forever as well. Take care now!
Nice tiller! I have a 40 year old bolens tiller that took me about ten pulls to start this year!
I just got a used tiller that look just like yours, also w/a 5HP Briggs and Stratton motor - with the exception of the name-brand label on the front. On mine, where "MTD" appears on the front of yours, at the beginning of the video, are the words POWER TILLER, to the left of which no words appear. As well, the model # label info on mine has COMPLETELY faded away and is longer visible . . . so I'm a bit frustrated. Do you know of any way to otherwise discern what model # my tiller is? I'm assuming maybe it's an "MTD" as well, cause as I said, it looks just like yours . . . but don't see the "MTD" name on it anywhere or model #. Very frustrating.
Just got a used one for the first time. Do I just reg gas in it?? And oil separate like I do a mower??
saver el precio de cuanto cuesta o cuanto vale
I have model 213 390 000 it's a 93, This year the carb cleaner didn't work so I am thinking of replacing the carb. It will fire but not stay running. It's like it's not getting fuel. I also replaced the belts and now the tines won't turn. Any idea's? they turned before I replaced the belt.
Must be the wrong belt and the carb is probably stopped up try and put it on half chock to see if it will run also. Check and make sure the air cleaner is clean good luck hope this helps
Great vid. Do you know how to change the oil in it? Also what is the max amount of oil that can be used? I have the exact same tiller, but I don't have the instructions for it. Thanks.
There should be a small screw at the front and back down low on the engine block both are drain bolts at least on my briggs and strattons and honda small engines like this, I just fill it till the oil level is at the bottom of the oil plug thread which I would guess would be between 0.8 to 1.2 quarts of oil but really it depends on how big the engine is, so just buy 2 quarts just in case, if it says 10w30 use 10w30 and so on do not try to run diesel oil it won't work.
If you dont mind can you tell me what time of oil does it need thanks
Hi, i ve got one which need a new throttle wire and i want to see how/where it is plug under the gaz tank...thanks
I have the exact same one ! Need a new strap can you help me ?
I’ve been seeing tillers a lot these days much like this on Facebook for like $50 and 100$ that sometimes ran and sometimes didn’t maybe I should get one
Hello Zinn oh yes that is a great deal if you get one these with this type of horizontal shaft Briggs and Stratton are just bullet proof. They sit a lot so the not running issue probably carburetor problems, its chain drive so if that tiller or tines appear to be jambed up then may be more expensive and not be worthwhile. Just about never seen any like these for sale here in need of repair mostly rusted out junk.
Got one at a garage sale for $40 bucks. Put a new carb on it for another $40 bucks and it runs like a dream.
OMG, you are running it WITH the transport wheels ?
Depth stake upside down?
What no oil change for the tilling seasons use?
Let it sit in the sun for one hr. Even if it sits for a day or two.Will start first shot.
Do you have your model # I have the same but is sold under wizard ..got it from Western Auto in the late 80s just restored it and I'm looking for belts / parts it would be a big help...Thanks
Hello Alabama Dirt Digger thanks for viewing! Yes its Model MTD Model # 212-390-000 I have bought past belts online using that model number. Hopefully you can find all the parts for your Tiller yours like this one are better than anything you can similar new!
Thanks your a life saver..God Bless and MERRY CHRISTMAS....
Ha ha! Funny thing is I’m watching this on April 13, 2019! 😂 Subscribed to your channel, too! 👍
My grandpa has the same exact engine on his cub cadet chipper
what is price
Soil biologists when the tiller digs in 😢
I need to know what plug goes in that engine?
Manual says RJ19LM.
@@tedwilliams8879 Thanks
Do you have model no for this tiller
Hi Mark thanks very much for viewing. This is Model Number 212-390-000 5 HP Chain Drive Tiller made by MTD bought this in 1992. It also has a reverse on it as well it has been a great Tiller.
Hi Mark Hammer thanks for viewing, its Model # 212-390-000 those numbers are about faded away on the engine but good to still have the original Owners Manual with that model # on it with this! Updated that within the description as well thanks and take care!
I need informetion in spanish
Puedo obtener informacion en español
Just bought one today 200 dollars
To je teda hajtra :-)
Wanna selll
Panne piston motobineuse