Calibrate A Delta 3d Printer with Marlin 1.1.8 Manually
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- In this video I walk through the setting in the latest marlin firmware 1.1.8 setting up manual auto-calibration / PID auto tuning / and the general settings. Then run through the auto-calibration routine and talk about how to make adjustments necessary to get delta calibrated
.
Latest Marlin - marlinfw.org/me...
latest Arduino IDE - www.arduino.cc...
Valve Knob (in case anyone interested) - www.thingivers...
My Config Files drive.google.c...
Buy an Anycubic Kossel From Gear Best (affiliate link)
goo.gl/M2oPo1
To Become a Patreon you can go here
www.patreon.co...
Buy me a Coffee - www.buymeacoff...
ZYLTECH 15% discount code "MindOfMatt" USE AT CHECKOUT
My Amazon Store
www.amazon.com...
Gear Best Affiliate Link
www.gearbest.co...
My 3D hub
www.3dhubs.com...
Check out www.3DPC.tech
You can Also Follow me on
Facebook
/ insidethemindofmattyou...
Twitter
@insidemindmatt
Instagram
/ insidethemindofmatt
So far the best basic infirmation i could find in you tube. Thank you. To adress my issues understanding what to use where, when with what do I upload etc... Perfectly understood. Thumbs up.
Awesome Thanks good to hear that was my goal. thanks for watching
I am so glad I found your video. My delta was collecting dust in my garage. Now it’s printing like a f****** champ! Thank you thank you thank you!
Terrence A. So glad to hear spread the word :)
Terrence A. Thanks for the coffee sir super appreciate that!!!
Thank u so much! I'm learning to calibrate my DIY Delta. And I love your knob
This is absolutely formidable! Thank you very much! I have that same printer and after doing a fair share of mods to it, I felt like it was time to play around Marlin itself, and this will be definitely my guide through it. You probably know how Chris over at Chris' Basement did something similar but for the Cartesian-style printers and I could not wait for something to come up for deltas -- and now I got it! Glad I subscribed to you after watching your MRRF video otherwise I would have missed it! Thanks and keep it up!
Man thanks a lot bro I finally calibrate my anycubic printer with your setting It take Teo days reading and understanding how it’s work but finally calibrate that you are awesome man thanks
I’m very happy you figured it out and glad my video assisted and hope you have many hours of fun printing thanks so much for watching
Inside The Mind Of Matt man thanks for the dedication that you put to upload videos for us the rookie ones like me I can’t print my first figure cause now the fan and the blower doesn’t work I looking for a solution
Thank you so much, finally able to fix my 5 year old dusty Flsun delta.
i could never fix the convex bed issue with auto calibration with probe. turns out this methods fix it all ! thank you so much !
That's awesome so glad to hear thanks for letting me know it still works
Great info. Marlin is a lot easier to config for delta printers than it was a couple years ago. The manual auto calibration helps a lot.
Nice useful and informative. I've been trying to get the diagonal rod calibration completed and followed some guys formulae on the Delta forums. It appears his calcs are wrong so will be trying the method shown here after my next print has finished. Thanks, keep up the good work.
Thanks for making this video, you have saved my sanity on my FLSUN Delta printer. Up and running like a boss! Buying you a coffee!
Randy Barnes wow glad to help and thanks for the coffee super appreciate it
just asking I am having trouble getting the auto configure to even run. I followed your video but still no luck. I have a fresh out of box Flsun Delta kossel pulley based. I have tried everything and am not having any luck any help would be gratefully :)
Thanks for your perfect explanation, gonna try this at my FLsun Kossel...
Your welcome please share how you make out thanks for watching
Thank you so much for this video . It's exactly what I was looking for !!!!!
Great glad to hear
Thank you MATT ! Thumb up for your video. Even if I don't speak English very well with your video I was able to configure mine Kossel ;-)
That's very clever but you already have an rpi all you need is a button placed beside the nozzel to trigger the zaxis for all the positions automatically
This a good video! Many good questions and great responses.
yes this video did spark many awesome conversations thanks for watching!
You have won a new member. Thank you.
Thank you always good to win something especially new subs
I follow the video settings and I upload the arduino code everything it’s fine going to 3D printer anycubic kossel pulleys versión when I try to calibrate manually starts testing the end stop one by one but keep pushing up
Well explained Matt - as usual. I don't have a delta printer, but maybe some day, who knows? :-)
After doing most of this my prints were coming out pretty solid but I could not print without a raft because my first layer was digging into the bed at random areas in the first layer. If anyone else is having this problem I finally found a solution for my printer which was uncommenting line #991 which is #define AUTO_BED_LEVELING_BILINEAR, then you just upload, run the auto-calibrate, store it. Now my bottom layer is the same all across the edge and I no longer have to use a raft.
I'll give that a go and see the results thank
Hope this works with my anycubic I will try tomorrow
Thanks for sharing , I just got the new anycubic kossel linear plus, it comes with a magnetically attached microswitch for leveling.... I dont like it, and to me I would rather learn to do it manually, unfortunately it seems some folks have had issues with the new autolevelling kossel plus's with the installed firmware forgetting their settings! as I can only find the hex version of the latest firmware on the manufacturers site I was looking towards installing the latest marlin on a spare ramps board leaving the original trigorilla board stock- thanks again for pointing me in the right direction
my auto calibration just does not work. so i'm going to try the 118 upgrade. at least I can eye check it!!!
Thank you look the video.
Thnaks man! it was really useful!!
Awesome Hope you got everything working
Thank you so much for the video and guidance. But I stuck at compiling firmware. Got error and I don't know how to solve it.
Hi Matt, thanks for the video it has been the best advice I have found on the internet being a relatively new person to printing. I've followed your steps but I had the firmware that came with the kossel installed beforehand. I installed marlin 1.1.8 with all your settings successfully but when I press auto home it doesn't auto home but instead just steps up. Also, when i get to doing the delta calibration it goes up into the endstops instead of down towards the bed, what do I need to edit in the code to change this?
I’d start with your stepper direction get them moving in the right direction once you get that if endstops don’t activate correct invert them also. Some times it trial an error. MOST IMPORTANT make sure you have the wires going o the right place on board nothing will work right if wires are swapped. I’m here to help you as best as I can so feel free to ask questions.
And your welcome and thanks for the kind words
@@InsideTheMindOfMatt I'm having technical difficulties, when I press Auto Home it goes up in increments of about 10mm until it hits the endstops then it stops. If I press auto Calibration it sounds like a machine gun at the top and the top and my endstops are right.
Still sounds like something isn’t set right before you can try to calibrate you need to be able to home it correctly
I do not see and proximity sensor for z axis ? and as I am building a delta my self it has made me go Banana++ the printhead goes hay while and gets stuck on one end incase i load a file it move good but inclind Please advise
What did you use to purge the filament on the side before print. Did you do that in the firmware or the start/script in the slicer. I've been wanting this for a while but wasn't inspired until now. Thanks man, great vid!!
Curtis Barclay yes that is a start gcode in my slicer
Would you be willing to share. I know each machine is completely different but will give me a base line to work with. Thanks.
I got one for the delta and 1 for the cartesian
Delta start gcode -
G28
G1 X-20 Y-80 Z0.2
G92 E0 ;zero the extruded length
G1 X30 E25 F500 ;extrude 25mm filament in a 40mm line
G92 E0 ;zero the extruded length
G1 X80 F4000 ;quick wipe
G1 Z0.5 ;raise and begin printing
M117 BUSY PRINTING
Cartesian start code-
G28
G1 X10 Y10 ;move to x10 y10
G28 Z0 ;move Z to min endstops
G1 Z0.4 ;raise to 0.4
G92 E0 ;zero the extruded length
G1 X40 E25 F500 ;extrude 25mm filament in a 40mm line
G92 E0 ;zero the extruded length
G1 X80 F4000 ;quick wipe
G1 Z0.5 ;raise and begin printing?
M117 BUSY PRINTING!!
That's AWESOME. Thanks Matt. I'll try it out. M117, mine says "STOP LOOKING AT ME!!" LOL. I saw this a while back but can't get it to work, any thoughts. facebook.com/344533612415300/posts/404787086389952
might be the screen I don't think it displayed on the stock screen. can't remember. Mine isn't stock anymore I upgraded from spare parts laying around
Ola Mat, is this auto calibration system also possible on ANET A8 ??
A big hug . I love your videos.
Hi Matt,
First of all I would like to say thanks for uploading this video, it is a great help with the basics for getting the Anycubic started; and I must say that it has more detail than a lot of other videos on TH-cam.
With that said I am encountering an issue when I am trying to upload the sketch from Ardunio, in that it fails to upload due to conflicting data in the Temperature.cpp file.
As this does not appear in your video I am wondering if I am doing something wrong, is there any help you can offer with this?
That is a new error on me would need to see more of what the error was saying to help with that but I have uploaded my config files and can send you a link if you want to try them
here is a link to my config files as well as the firmware 1.1.8 there are a few setting to change like the name and might have to change height and if things don't move the right way you might have to change motor logic drive.google.com/drive/folders/1Vn_SCP6ElvQyj_lA8ci_hnhsyPacTZKp?usp=sharing
Hey Matt! Your video is really educational! despite that, I'm having a problem. I did everything like you did in the video, and the marlin file imports just fine. But when I use the Auto Calibration option, when the pulleys reached the top it didn't stop and keep on moving (it stucked there but the motor is still running and it made weird noises). Is there anyway to fix this?
My printer is Anycubic Kossel Plus (basically yours with a larger bed). Thanks!
P/S: I'm a beginner so I know basically nothing about Arduino and stuff. Bought the machine 2 years ago then it broke (it was printing midair) and I got bored. After 2 years, I cameback and is trying to fix the bug.
Before you get to the calibration you need to make sure you printer homes correctly 1st if it don’t you need to check the end stop logic and possibly swap till it homes correctly
in the probe section did you turn off the other options
hello, would your instructions work for a FLSUN QQ kossel printer? thanks
Yes the brand shouldn’t matter some parts and measurements might differ but that just a matter of tweaking the firmware
Hi Matt great video, if you could have only heard me screaming at this thing yesterday. I followed your video to the letter but cant seem to stop the printhead from crashing into the bed even after i change all the inverts to false. I am about to revert the printer back to stock then try again but did you come across anything like this? oh and after uploading autohome would just move the pulleys up a few steps then stop. Thinking may be dodgey download of Marlin
got it, was inverting wrong thing :P now calibrating for second time as extruder needed it too. Thanks again
Hi, thanks for the tutorial.
When test the auto-calibration , it goes not 5mm from the print bed but 50mm, the display said 5mm !
I think there is a problem ?
yes I'd say there is a problem! What is your z height you set in firmware?
I've follow all steps but i have two problems: 1. when i click on Auto Calibration my printer isn't move. 2: when i click on Auto Home the nozzle crashed with the bed and broken the glass. What can i do ?
Wow! Sorry to hear about your glass. Well the 1st step is the obvious you need new glass. but it sounds like your z height is set to high i'd lower that value so it doesn't crash and you can increase it to get to the the bed set the height before you calibrate delta
Quick question. What would make my kossel not print a straight line when printing in the direction of the x axis to the z axis and also the y axis to the z axis. I cannot print equal sided square....
long drawn out answer there could be many factors but i'd start with belts they need to be tight
Inside The Mind Of Matt thanks
Did you get any improvement?
Inside The Mind Of Matt i did. After tightening the belts whicb were a litrle loose and performing a skew correction it worked out. I didnt realize that despite making changes in Marlin and uploading the program to the printer I still needed to command a m500 and m502 to hard code the changes into the eeprom to enforce the use of the data. I learned alot trying to troubleshoot this thing which is a good thing! I need to learn more about gcode commands. Thanks for your help and responses!!
u2ooberboober yes M500 every time you make a change also just a suggestion if your reflashing at any point in the IDE under example EEPROM there is clear EEPROM if you upload that 1st it will whip everything from the printer board and the fresh flash with take period. I do this when making any firmware changes
hi, i have board 33 in my kossel , once did configuration file i cannot get any movement but move toward endstops for any axes.
maybe i have an old board and it is not compatible
It might be a matter of playing with either the endstop setting true/false or motor inverting true false depending on that printers behavior when you try to home
I know film is about calibrating but my extruder is not feeding extruder properly IT is making clock noise and filament id going back to spull what should i do, sry for my bad english
I would say either switch the wire on the board if you can turn it 180 degrees or in firmware change logic for E0 from false - true or true to false
thanks for great advice, but when finish all setting on the Arduino, how do i send all the config on my Anycubic, please help, many thanks
You need the printer connected to the computer with a usb cable you have to select the correct port and upload it
Hi, very tanks, iv' a small problem, when i print the cube i've mesuring 16.0 /20 all X Y Z, where I can change value on marlin, excuse me i speak french
Well as long as you have to proper step/mm your going to want to change your delta diagonal rod value. If print size too small lower value if print too big raise the value
how did you get the extruder to be at 5 mm above the bed when i auto cali it smashes and i let it go for a bit and it stops and says 2mm how do i adjust that height it stops i currently have z height set at 360 figuring the added height would stop it before it crashes into bed
old comment but the bigger height, the more the thing will descend. Decrease your z-height significantly, closer to 300
My printer was working well for a while and suddenly during auto calibration after probing correctly for first 5 points on bed the z axis motor only moves and vibrates after reaching the endstop and the arm is raised to one end and an error message saying "checking AC" appears in the lcd screen with z axis motor still trying to rotate..what may be the problem??
Did you ever fix this problem ? My printer is doing the exact same thing with the z motor.
Oliver Mackenzie
I made it working I reloaded the marlin once again and now it's working
When using the manual calibration on the printer, it start with a value of "-5" instead of 5 like on this video, and i can only increase the value, and lift the nozzle even more from the bed, if I try to go under -5, the nozzle goes all the way up (but doesn't home, just hang at maximum height)
what could cause this inversion? and why doesn't it like to go "over" (in absolute value) the 5 mm it gives?
Nagby3 sounds like your stepper direction is backward does it auto-home? And there is a setting marlin to allows to go lower I believe it’s software min I’ll have to look if you can find it but check movement direction 1st and let me know how you make out
steppers direction are correct, but this calibration is acting very weird, the way I got it to go lower was :
first do a "calibrate height" and validate the height it goes at because I can't go any lower
now the height in delta settings isn't 0 anymore, but 230 (my printer height is around 240) so I can manually get it to 240mm (doesn't let me change this value more than that)
and then i could get to the bed with the normal calibration, by turning the dial a lot ... since it always started 10mm away from the bed
now doing a test print, a bit too high, but i guess i would just have to do the height calibration a bit lower now?
also, the printer home very fast ... too fast (everything is shaking) what speed value do I have to edit for that?
edit : vmax of course ... the configuration.h file I started with had 300mm/s for all axis, while 100 is already max speed for my drivers
XYZ acceleration I have mine at 2000
when i turn on my printer it shows x y with a ? do i have to calibrate each time i turn my printer on?? how do i save a calibration permanently??
isaacdahab1 M500 will save your settings enter that gcode via a terminal or store setting from menu
My extruder cooling fan isnt working what should i do?
in configuration_adv.h #define E0_AUTO_FAN_PIN 44
hey, after ich define Probe_Manually this is what i get:
SanityCheck.h:638: error: static assertion failed: Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo.
static_assert(1 >= 0
does anybody has any idea what the problem may be?
thanks
Felix:)
Seems you have more then one probe setting enabled
yeah i checked it but its only manually :/
I followed your tutorial, but get the following error "Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\MarlinConfig.h:40:0,
from C:\Users\***\Downloads\Marlin-1.1.x\Marlin-1.1.x\Marlin\Marlin.ino:31:
SanityCheck.h:621: error: #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
^
exit status 1
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
"
Start with a fresh marlin e-mail me at insidethemindofmatt@gmail.com I’ll send you my config files
Thanks for the prompt reply Matt, I did start with a fresh Marlin, but i have emailed you. THank you
For some reason when it wants to auto home it just keeps ramming into one of the endstops like it's not working, yet when I home it using pronterface (g28) it works just fine, so the endstop seems to be physically working, but there is something else going on
Bart A. Check and make sure all your steppers and endstops are plugged into the correct spot on the motherboard
They are, for some reason the marlin firmware by emilio cabrera works now, with the help of the comment of Mateo Mrnjavac, but whereas the official latest marlin is ramming into the endstops like crazy for some reason, his marlin version does not have that problem.. So not that it matters for me, because I have a working printer now, but it's still odd
Yes I had some difficulty with a version I downloaded myself it would act right so just configured everything myself out of an example and I was successful and have done so since glad you got it working
Bart A. It is because the motor setting of x,y,z in example file reverse value all true, if you install following the instruction from the anycubic on the motor jumper cable correctly, you need to set all to false (in the video above 3 value true 3 value false, I use all false, it is working)
how did you get it onto the printer
I have a Anet A8 and just got the Anycubic Kossle and am totally in over my head with the Delta and keep getting these errors...
SanityCheck.h:734: error: #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
SanityCheck.h:736: error: #error "TEMP_SENSOR_0 is required."
#error "TEMP_SENSOR_0 is required."
SanityCheck.h:737: error: #endif without #if
#endif
exit status 1
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
Maybe you could send me your configuration.h file I’ll take a look
Insidethemindofmatt@gmail.com
I dumped my marlin software and reloaded everything and surprise it worked... Thank for this Video it is most helpful.
I have everything working except the extruder cooling fan, but other than that everything is good. Thank you for the help.
Matt, have you made one of these for the CR 10S?
Calibration for a Cartesian style is much easier then a delta I did a firmware video for an older marlin version in my Ramps series for a maker select. I do need to do a little modification to my cr-10 so I could included my firmware settings stay tuned
Inside The Mind Of Matt I have a link from printsolid.com.. supposedly it's a cake walk for the CR 10S, long link.
Https://printsolid.com/blogs/news/installing-marlin-1-1-6-on-your-cr-10s-with-mesh-bed-leveling
I haven't decided yet to pull the trigger on an e3dv6 replacement hot end yet, all the current TH-cam videos relating to updating the firmware on the creality, refer only to the CR 10, not the 10S.
But really, thanks for replying to my question.
can I have your config.h file please? I'm trying everything you said but it doesn't work. the motor goes up to the top and it starts grinding. I changed the 3 end stops min to false but then it goes down and start grinding.
for 1 there is a link to my config files in the discription
for 2 for a delta use max endstops
So my anycubic kossel linear plus is printing above the build plate by about 20mm. I have tried to mess with settings and I just can not get anything to change it. I'm using cura to print.
you need to increase you Z height value in your firmware
Inside The Mind Of Matt
I forgot to mention that we printed a test cube yesterday and it printed fine. Little hard to get off the bed but other then that everything was great. Went to print more after and it just starts printing above the bed. Is dosen't matter what we try to print. I'm really new to 3d printing. I'm sorry if this is a stupid question. I can't find help anywhere.
So if you home it it goes to the bed but when you try to print it doesn’t go to the bed?
Inside The Mind Of Matt
So when I press auto home it just goes to the top and hits all 3 z stops and doesn't do anything else. When I level it nothing goes wrong it gives me the new z offsets and stores them fine. I'm not sure what I'm doing wrong.
Sound like in your slicer you either have a z offset value set or you height in the printer profile in your slicer is wrong I’m a simplify3d user so cute setting I’m not sure where it is but make sure your slicer knows how tall the printer is
I followed your video to the letter. Pressed "Auto Calibration" under "Delta Calibration" and nothing happens. Checked and rechecked and triple-checked all the settings in the Marlin 1.1.8 firmware as per your video. Still nothing happens. I'm no guru at this and I'm stumped. Everything was working fine until I decided to update the firmware. Any suggestions?
What happens when you auto home?
Auto home works perfectly fine.
I can look over your config.h I can look to see if I see anything send to insidethemindofmatt@gmail.com
OK I will do that. Give me a few minutes.
Inside The Mind Of Matt
The similar issue happened to me too.eatlier it was working well. Have you figured out the issue??
Theres no store settings that appears on the LCD for me after making changes to delta rod.
When I reboot the system it goes back to original (even when I start a print it does)
Anyone has a solution for this?
in your firmware enable eeprom by removing the // in front of that line. You'll find this in your configuration.h tab
Thank you, saved the settings now
im receiving this error Arduino: 1.8.5 (Windows 8.1), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In file included from sketch\MarlinConfig.h:40:0,
SanityCheck.h:621: error: #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
^
SanityCheck.h:874: error: #error "LCD_BED_LEVELING requires an LCD controller."
#error "LCD_BED_LEVELING requires an LCD controller."
^
exit status 1
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
any help please ? i started a fresh config file and the error is still there
make sure you remove the // infront of define PROBE_MANUALLY like at 11:45 of the video
hey loved your video I have a question ?> I went to auto level and the axis hits the end stops and just starts grinding like it wants to keep going up how do i correct this thanks
Try changing the logic in the firmware from false to true or visa versa also make sure the proper endstop with is going to the correct port in the board I had that mistake during my build let me know how you progress
i just changed the invert z dir from false to true no dice
oh and all the wiring is correct i had it running before this marlin firmware withe the og firmware it came with just want that auto leveling
Matthew Lambert change the endstop logic not the stepper and all 3 XY&Z need to be the same
yea but do i change the min and the max ?
I have the anycubic kossel. and it seems to show this error when I upload the firmware #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller." plz help
S3ODG At 11:50 in video I talked about enabling the manual probe did you do that?
Inside The Mind Of Matt yes I did
Inside The Mind Of Matt thx for replying btw
Glad to be able to help there have been others that have had problems and 2 things I've suggested 1. start with a fresh config.h from the example folder in marlin and make these changes when that hasn't worked I have sent my config file out. If you'd like me to send you mind e-mail me and I send it out. You'll still have some changes to make but file complies let me know if you want me to send you files
Inside The Mind Of Matt that would be amazing. I've been trying to figure ths out since I bought my 3d printer
about ready to give up on this... Autotune fails. Manual tune fails. Never saves the settings! I always hit store and they show but it's like it ignores them. the center is always perfect. then it acts like a rainbow from side to side of x and y. Then it gives me options to tune ZXY I do this feature and it randomly changes highet as it moves. but then Marlin 1.1.6 works fine...
Make sure in your firmware you enabled eeprom
Inside The Mind Of Matt you know.... new to delta printers* have cnc everything you can think of in my workshop lol. Mills, routers, gantry printers.... fn sensor! Lol. The marlin 1.1.8 for what ever reason offset my sensor -20mm on y axis from the printer tip. Even though printer sensor was dead over the nozzel. But yes eeprom prom was first thing i checked. Im using a Edison board with a 6 breakout board for my project. Optical everything. Project over kill! But i loved your manually setting up video. Was a real goid way to get a ball park for the auto probe setup. Nice video!
thank you Rich Morgenstein about this comment !
I get the same error. I lost more than 2 weeks to fix it but it still didn't work.
the center is always perfect. then it acts like a rainbow from side to side of x and y.
Please show me how to fix this error ?
Cant undertand when im going to auto calibrate the motors push all the way up....same things when i go to move Z when i go down the motors goes up
What happens when you do just an auto home? If movement is opposite during homing then invert steppers in firmware and re upload
on my mind i think that you have reverse polarity of the motors please check it in marlin :)
I fix that long time ago ....now I’m trying to figure out how to use z probe from anycubic but I think is not the best things think I’m going with something like inductive or optical probe or change with bltouch
Bro its a simple project www.thingiverse.com/thing:315698 . For my delta this probe works perfect :) but remember that you have to mesure level on heat bed for ex 90 deegres. If you mesure and save to eeprom you have to use comand m421 in your start GCode becouse command g28 delay mesh leveling. Peace :)
Jakub-benz if I can’t print...I can’t build it
I delta calibration menu "store setting" and " reset setting" are missing. Why is it so??
Those should be in a different menu
Inside The Mind Of Matt
Where it could be any idea?? and one more question during automatic calibration even after reaching the value of zero from 5, the nozzle is not touching the bed at some section(mainly in back slide z axis )
Below zero why I can't go during auto calibration??
increase the starting value for you z height in the firmware I say add 5mm and try again until you get it close enough to reach within that 5mm
they should be found under the control menu
Great video. I tried to upload it says "error compilling for board Aurduino/genuino Mega or mega 2560" also it cant fond the specific file?
Johnathon Balchin make sure your starting with a fresh version of marlin
Inside The Mind Of Matt I'm using a fresh version of Merlin.
Make sure you have no other programs open that might take the comm port and make sure your Arduino software’s libraries are all up to date
Inside The Mind Of Matt I closed all programs and updated the libraries but still the same message :( . Ill keep trying
Thanks for helping me. I have found the problem. It was Onedrive, it wouldnt allow it to work without unchecking files on demand. Successfully uploaded on my delta :) Watching the rest of your video now.
I have a TriGorilla board will this work?
Yes the TriGorilla is an Arduino based board that work with marlin
Oh thank you for your quick response, much appreciated. however I'm afraid i need to ask another question. Okay, so looking on the processor it says ATMega2560. So when I'm in the Arduino program and i attempt to upload I'm getting an error, that reads, "pasting "/* SPI Master In Slave Out pin*/" and "_DDR" does not give a valid preprocessing token" it's line 100 in the 'Sd2Card.h' file which reads. "#define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin" ...and I don't know what this means or how to fix it. would you know what this means? I'm new at this so i could just be making a simple mistake.
Update: I figured out this has something to do with enabling SDsupport, I have an SD card and I would say I prefer to print from the SD card, bu in fact it is the only way I knew how to print anything. I would like to use the SDsupport, but I don't know how to get around this error.
Okay I copied and pasted the error into google and this came up forum.arduino.cc/index.php?topic=542083.0 . This fixed my problem, apparently the 'Sd2Card.h' sketch combined with the newest version of the Arduino IDE creates a bug that causes this error. So if anyone is stuck @12:23, it's not your fault. Follow the simple directions on this forum and it'll allow you to continue on with the video.
Please know Starting G-code Script.
here ya go
G28
G1 X-20 Y-80 Z0.2
G92 E0 ;zero the extruded length
G1 X30 E25 F500 ;extrude 25mm filament in a 40mm line
G92 E0 ;zero the extruded length
G1 X80 F4000 ;quick wipe
G1 Z0.5 ;raise and begin printing
M117 BUSY PRINTING
In file included from sketch\MarlinConfig.h:40:0,
from E:\Marlin-1.1.x\Marlin\Marlin.ino:31:
SanityCheck.h:621: error: #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
^
exit status 1
#error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller."
Did you uncomment the probe_manually?
Yes, 693 #define PROBE_MANUALLY
The error occurred when I uncomment 486 #define DELTA_AUTO_CALIBRATION
Olá Matt, tenho uma kossel mini que eu mesmo montei e até o momento não consegui fazer funcionar seja o auto calibration ou o bed leveling, por esse motivo a primeira camada sai muito ruim . Voce pode fornecer o seu arquivo configuration.h pra eu testar aqui ?
Se puder me ajudar meu email é carlosribeiro58@bol.com.br.
Muito obrigado Matt e parabens pelo video, muito bom.
Carlos Gomes Ribeiro would love to help that email is not a working address give me a good one and I’ll send
Bem Matt, tenho outro carlosribeiro58@gmail.com. obrigado
Olá Matt, funcionou ogora tudo perfeito, foi inverter o sentido dos motores, endstpos e ajustar o radius da mesa ficou top. muito obrigado pela ajuda.
Have to wait till I get home to translate
Hello Matt, everything worked perfect now, was reversing the direction of the motors, endstpos and adjusting the radius of the table top. Thanks a lot for the help. (translated)