Did you like the Tricorn Black paint color? To help you navigate this video, I placed timestamps below. Enjoy! Painting Shiplap 00:21 How To Prepare The Wall For Shiplap 01:29 Installing Shiplap 05:19 Cutting Out For Outlets 11:24 Installing Shiplap Around Windows 14:25 Filling and Sanding Nail Holes 15:58 Preparing Shiplap Wall For Paint 17:10 Painting 2nd Coat 17:48
Have always loved doing this on accent walls and including a vaulted ceiling. Adds so much character to the design of a room. Great job as always Josh 👍🏻
Oh that would look awesome on a vaulted ceiling David! It’s interesting how much better room looks at the little bit of extra work. Thanks for stopping by!
Love your advice here. I'll be doing this soon. The only thing I would change is the lines between the boards. I would just alternate it every row. Less cuts the better. Your way there's more cuts. I get why you did it.
You can use a circular saw with perfect lines if you do not have a miter saw. Just use a quick square on your cuts as a guide. I usually use a piece of painter tap on my cut line as well to prevent any chipping of the finish.
@@Faruk651 or a homeowner/DIY. If anyone identifies with that, just make sure you use a new blade, and you cut from the back side so the rotation of the blade is forcing the teeth into the front. This way, the fibers of the wood have a backer, and there will be minimal chipping.
I have a couple of questions: 1) What if the wall is slightly bowed out? 2) Also, would you still need to stagger the lines if you had a space that was 6 ft across? My thought would be to cut all of the boards to 6 ft and install.
Need to add a spark guard around that plug per code. "ARLINGTON BE1 SINGLE-GANG BOX EXTENDER". Looks and turned out great, like the style, looks expensive though.
Came here to say that. Glad I checked first. ;-) There are so, so many shiplap installs on TH-cam where they don't use extenders. Dangerous and a code violation.
So rare to find installer starting from top to bottom. Home Depot's video shows from top down also. Eliminating the gap by the ceiling with molding for a clean look could be worth holding up each board when nailing. Some prefer to leave the joint showing up for a staggered look. I am trying to weigh all the prons and cons before starting the project. Any suggestions will be appreciated............ Thanks for taking time to detail the work for an excellent finish.
Excellent video. I’m doing shiplap install this week. I was concerned about all those nail holes bc despite spackling them and sanding, you may still see them after paint is applied. Are you gonna add base mould and side mould (verticals) to this wall? Nice job. 👍
Great video! If you were installing shiplap around a door, would you take the door off and put in a new jamb or would you just extend the current jamb somehow? Thanks.
Well done Josh. I do like the black, not sure what the boss will say. We are building our own home this summer and I will be using a lot of your excellent tips. I know we talked about doing one wall in our kitchen Shiplap. Not sure if it will be while or a colour. Thanks for taking the time to explain everything so well.
Great Video and nice explanation. I wanted to tackle similar project for my living room and this video timing is perfect. What type of material (shiplap) you used? I saw in description but couldn't find link for material.
Found you channel by looking for bathroom renovations and I glad I came across you videos. Love the work you do! Could you do a tutorial on changing bullnose corners to square corner beads?
Going to add shiplap to our existing fireplace TV area. Going to wrap it around an outside corner. Haven’t seen anyone else miter a ship lap for a corner. Anyone have a strong opinion on whether that will work?
Everything looks good. Except you don't just nail all over the face of the boards. You mark your studs, then put power grab adhesive on the back of the board, then only nail through the lip that will be covered. If absolutely necessary, you can pin nail the top bord to the lip underneath. Why would you want to see all of the nails? Even if you're using finish nails. You'll need to fill and sand every one. Also, you must put a box extension/spark shield on the outlet boxes. It's code.
Do you not watch the whole video? He did mark all the studs. And then he chose not to do power grab since he might want to remove it later and doesn’t want to completely destroy the drywall. Once you spackle and sand the nail holes you don’t see them at all if done right
Is the process the same for ceilings or are there other steps in order to avoid sagging between the trusses? My trusses are about 24 on center and I'm worried that the gap is too large
Why butt cut at the joints? a 45 would make that joint less visible. And I would always put one of the nails on the tongue so that way, you'll have half as many nail holes to fill
Yes, but if you decide to paint it white in the future you will have no option except to spray paint to cover the black background. That’s the problem with shiplap.
Would have used a 22 1/2 degree miter at butt ends and painted the raw edge before install....sorry..........Window casing, when ripping the true width, cut the back side that goes against the window leaving the finish edge for new casing and paint the raw edge before install.......
3:48 not a good idea when the corner is drywall and has mud, another reason is studs maybe dog legged and out of plumb. I would have done what you did at the bottom or used a 6 foot level from point of reference. Also sockets nowadays have 2 separate power sources thus 2 different breakers, be sure to check the upper and lower before attempting to remove the socket. Just a suggestion :)
Seriously Dude! 👎🏼 about ‘shiplap!’ geesh, I am sick of hearing that term. The DIY shows all get ‘gah gah’ over shiplap. It’’s ridiculous! EFF the freakin shiplap! Love your content, but this stuff gets under my skin. *rant over*. I’m dun now. 😐
Hey Brian! The concept of using black felt works great for standard boards but in this case where you have shiplap you won’t see anything behind the boards other than where the laps are. That’s why you should paint the laps before you install the boards. Hope that helps!
Did you like the Tricorn Black paint color? To help you navigate this video, I placed timestamps below. Enjoy!
Painting Shiplap 00:21
How To Prepare The Wall For Shiplap 01:29
Installing Shiplap 05:19
Cutting Out For Outlets 11:24
Installing Shiplap Around Windows 14:25
Filling and Sanding Nail Holes 15:58
Preparing Shiplap Wall For Paint 17:10
Painting 2nd Coat 17:48
Very nice! What sheen was the paint? Semi-gloss or satin?
She's very smart. Glad you listened to her. Great example for men.
Doing a bath remodel currently and your channel has been invaluable for a novice like me. Great info and production value!
Have always loved doing this on accent walls and including a vaulted ceiling. Adds so much character to the design of a room.
Great job as always Josh 👍🏻
Oh that would look awesome on a vaulted ceiling David! It’s interesting how much better room looks at the little bit of extra work. Thanks for stopping by!
Looks good. I would put the bottle nail in the lip of the board so you only have to do half the filling and sanding.
I just nailed into the lip of the shiplap. It holds fine and it doesn't have holes you need to fill in the shiplap.
I was just thinking on doing this on top of my fireplace. Perfect timing. Thanks!
I’m glad you are enjoying my content. Thanks for watching!
Ficou lindo, amo! Absolutely gorgeous. It is noticeable how your love what you do from your highly detail explanation. Thank you, Mr.
Love your advice here. I'll be doing this soon. The only thing I would change is the lines between the boards. I would just alternate it every row. Less cuts the better. Your way there's more cuts. I get why you did it.
Thanks Josh. Those instructions were terrific. I feel really prepared to do an install today
You differently know what you’re doing. Thank you
You can use a circular saw with perfect lines if you do not have a miter saw. Just use a quick square on your cuts as a guide. I usually use a piece of painter tap on my cut line as well to prevent any chipping of the finish.
Yes you could for sure use that method. It’s just a lot quicker and less room for error when you use a miter saw. Thanks for watching!
You are a hack if you use a circular saw for finish work.
@@Faruk651 Your a hack if you DON'T know how to use a circular saw for finish work friend.
@@Faruk651 or a homeowner/DIY. If anyone identifies with that, just make sure you use a new blade, and you cut from the back side so the rotation of the blade is forcing the teeth into the front. This way, the fibers of the wood have a backer, and there will be minimal chipping.
I have a couple of questions:
1) What if the wall is slightly bowed out?
2) Also, would you still need to stagger the lines if you had a space that was 6 ft across? My thought would be to cut all of the boards to 6 ft and install.
Really, excellent video
Merry Christmas
Merry Christmas to you as well! I hope your new year is amazing!
Looks good! Nicely explained.
Thank you!
Need to add a spark guard around that plug per code. "ARLINGTON BE1 SINGLE-GANG BOX EXTENDER". Looks and turned out great, like the style, looks expensive though.
Came here to say that. Glad I checked first. ;-) There are so, so many shiplap installs on TH-cam where they don't use extenders. Dangerous and a code violation.
Do you think I can use my 16ga angled finish nailer to install shiplap around a fireplace?
So rare to find installer starting from top to bottom. Home Depot's video shows from top down also. Eliminating the gap by the ceiling with molding for a clean look could be worth holding up each board when nailing. Some prefer to leave the joint showing up for a staggered look. I am trying to weigh all the prons and cons before starting the project. Any suggestions will be appreciated............ Thanks for taking time to detail the work for an excellent finish.
Great tip . Thanks.
You are welcome. Thanks for watching!
Excellent video. I’m doing shiplap install this week. I was concerned about all those nail holes bc despite spackling them and sanding, you may still see them after paint is applied. Are you gonna add base mould and side mould (verticals) to this wall? Nice job. 👍
Great video! If you were installing shiplap around a door, would you take the door off and put in a new jamb or would you just extend the current jamb somehow? Thanks.
Looks great Josh . I’d like to make a driveway gate with a ship lap design. Great video and great channel.❤
Very informative.
Well done Josh. I do like the black, not sure what the boss will say. We are building our own home this summer and I will be using a lot of your excellent tips. I know we talked about doing one wall in our kitchen Shiplap. Not sure if it will be while or a colour. Thanks for taking the time to explain everything so well.
Great video thanks!
Working with wood is a wonderful and easy thing, especially electricity here in Africa or Europe, everything is on clay and concrete
That is good to know. I’m sure construction is much different in other countries than here. Thanks for watching!
Great Video and nice explanation. I wanted to tackle similar project for my living room and this video timing is perfect. What type of material (shiplap) you used? I saw in description but couldn't find link for material.
It is just standard shiplap that can be found in any home improvement store such as Lowes or Home Depot. I hope that helps!
Wonderful 💯💡🤠
Thank you Anthony! I appreciate you watching my videos
Found you channel by looking for bathroom renovations and I glad I came across you videos. Love the work you do! Could you do a tutorial on changing bullnose corners to square corner beads?
What did you use to extend the electric outlets and covers?
They are called box extenders or Spark guards. I hope that helps!
Great work! 😍
Could you share details on spray gun and if you thinned paint ? Thanks
How do the outlet receptacles fit in flush with the wall ? Are the screws backed out the thickness of the board ?
Going to add shiplap to our existing fireplace TV area. Going to wrap it around an outside corner. Haven’t seen anyone else miter a ship lap for a corner. Anyone have a strong opinion on whether that will work?
nice work
I appreciate that! Take care
What do you do if your ceiling is uneven when you start at the top?
Before installing it's probably a good idea to paint the wall behind with one coat just to be safe.
Did you prime or just paint and did you sand the wood?
What kind of paint gun did you use . It look like less over spray
Everything looks good. Except you don't just nail all over the face of the boards. You mark your studs, then put power grab adhesive on the back of the board, then only nail through the lip that will be covered. If absolutely necessary, you can pin nail the top bord to the lip underneath. Why would you want to see all of the nails? Even if you're using finish nails. You'll need to fill and sand every one. Also, you must put a box extension/spark shield on the outlet boxes. It's code.
Exactly. I'm paying extra to see nails every where? REALLY. Do not like at all
Do you not watch the whole video? He did mark all the studs. And then he chose not to do power grab since he might want to remove it later and doesn’t want to completely destroy the drywall. Once you spackle and sand the nail holes you don’t see them at all if done right
Is the process the same for ceilings or are there other steps in order to avoid sagging between the trusses? My trusses are about 24 on center and I'm worried that the gap is too large
Going to need to add spacers on the outlet boxes to pull the plug out a bit....
Great video man . Love the Instagram sending me here.
Thanks for coming to my TH-cam channel! Definitely more valuable long form content here to watch. Enjoy!
How would you install in on a metal framed wall?
Why butt cut at the joints? a 45 would make that joint less visible. And I would always put one of the nails on the tongue so that way, you'll have half as many nail holes to fill
💪✌️
How all is well! Thanks for watching!
Yes, but if you decide to paint it white in the future you will have no option except to spray paint to cover the black background. That’s the problem with shiplap.
Would have used a 22 1/2 degree miter at butt ends and painted the raw edge before install....sorry..........Window casing, when ripping the true width, cut the back side that goes against the window leaving the finish edge for new casing and paint the raw edge before install.......
EXCELLENT dude!!! New subscriber and your EXCELLENT!!!
Blind nail
there was no kitchen cabinet video
Here is the link to the video th-cam.com/video/XthRuvmIHTY/w-d-xo.html .I hope it helps!
Measuring stud location from top to bottom…you’ve actually found a square wall? I’ve yet to 😂
How did you move the outlet out with the Shiplap? And have you ever done Shiplap on a ceiling?
3:48 not a good idea when the corner is drywall and has mud, another reason is studs maybe dog legged and out of plumb. I would have done what you did at the bottom or used a 6 foot level from point of reference. Also sockets nowadays have 2 separate power sources thus 2 different breakers, be sure to check the upper and lower before attempting to remove the socket. Just a suggestion :)
Sockets nowadays have two power sources? That is complete bullshit. I don't know where you're from but that is not a thing.
Never do butt joints!!! 45° your joint ffs!!!
Seriously Dude! 👎🏼 about ‘shiplap!’ geesh, I am sick of hearing that term. The DIY shows all get ‘gah gah’ over shiplap. It’’s ridiculous! EFF the freakin shiplap!
Love your content, but this stuff gets under my skin. *rant over*. I’m dun now. 😐
Hehehe, new constructions are terrible nowadays. Ask me about it. Terrible walls. Not leveled at all.
Don't waste money on paint take roofing felt put it on black side out it's done at 30 seconds and he's probably saved $80 in paint
Hey Brian! The concept of using black felt works great for standard boards but in this case where you have shiplap you won’t see anything behind the boards other than where the laps are. That’s why you should paint the laps before you install the boards. Hope that helps!