How do you tell what 3M6000 series mask you have? 6100, 6200 and 6300 are not printed anywhere on or in the mask. Also.. 3M doesn't seem to provide any information about the "look" of the finished mask.. there are some numbers like EN140 1998. CE0086. ... but, what does that mean? Thanks much, if you know, and tell... :-)
@sewagii I did some research on this topic. In 3M's website, they have some articles about the use of respirators in pandemics. They mentioned the H1N1 outbreak in 08-09 when all N95 face masks were used up. Medical personnel had no choice but used respirators instead. That means respirators are an viable option. They only problem is what filter you use. Not all filters are suitable.
Can you disinfect and reuse P3R 6035 Particulate Filters? I have several of them, bought before the Coronavirus outbreak, but if I had to replace them all the time - eg. after going grocery shopping - I'd quickly go bankrupt with current filter prices in my country.
Here is a link to the 3M document on doing just that. multimedia.3m.com/mws/media/1793959O/cleaning-and-disinfecting-3m-reusable-respirators-following-potential-exposure-to-coronaviruses.pdf
@@pansub5626 niye çıkarsın knk iş malzemesi bu normalde. O kağıt ameliyat maskeleri hiç bir işe yaramıyor. ffp3 standartına sahip maske takmak lazım bu onların en iyisi. Fakat hiç bir şekilde maskeye elini dezenfekte etmeden dokunma. Markete girerken taktın, işin bittikten sonra elini yıkadın sonra maskeyi çıkar. Kağıt maskelere göre daha rahat nefes alınıp veriliyor o yüzden 2-3 saat takılı kalırsa rahatsız etmez.
Haha! It actually does make you look like Scorpion xD The first time I put on my 6200 mask and looked in the mirror, I instinctively yelled "Get over here!" xD ...But then I realized that's probably not something I would like Covid-19 to do, so I'll choose Reptile instead... 😆 (And Sub-Zero would just freeze down and preserve the virus for later 🤦♂️😅 So he is not even allowed to participate... 😏) Yes, I might be a little childish, but I've also been taking this seriously and carefully read all the instructions, done the saftey-checks/fit-testing and learned about how to properly maintain and clean all parts of the respirator 🙂
There was something wrong with etither my mask or the filters I bough, because the filters just wouldn't fit no matter how I twisted, turned and alligned! I was in a hurry and I eventually managed to snap them into place, but before I did that - those elevated plastic pieces on the 6200 mask got a bit damaged and bent... I was supposed to work that day (healthcare) but I didn't want to work while using broken PPE, so I'm staying at home and wait for a new mask to be delivered...😑
THANK YOU!!! The instructions that came with mine were IMPOSSIBLE to read. This saved the day!
When I get old I'm gonna tell my grandchildren that: "Grandpa lost his beard in the 2020 Corona-pandemic."
Great instructions. Thanks!
Awsome help ,,big thankyou😊😊
How do you tell what 3M6000 series mask you have? 6100, 6200 and 6300 are not printed anywhere on or in the mask. Also.. 3M doesn't seem to provide any information about the "look" of the finished mask.. there are some numbers like EN140 1998. CE0086. ... but, what does that mean? Thanks much, if you know, and tell... :-)
question the materials what use on the creation what sales with QRcode and referent have the fasility of geolocalization whe am hurt.
With these masks are you able to smell the smoke when doing a surgery? Thanks
Nope, not even a fart
@@indomaret6745 you can smell when people smoke cigarettes and you can smell other noxious odors such as truck smoke and human refuse.
Can it prevent viral infection?
6035 P3 filters can Indeed
@@maxsebastian7550 thanks
@@maxsebastian7550 Can it be used with 3M 6000 Series?
@sewagii I did some research on this topic. In 3M's website, they have some articles about the use of respirators in pandemics. They mentioned the H1N1 outbreak in 08-09 when all N95 face masks were used up. Medical personnel had no choice but used respirators instead. That means respirators are an viable option. They only problem is what filter you use. Not all filters are suitable.
@sewagii Better to buy it in advance than waiting until its too late.
Amigos no entindo ingles pero lo q se ve en el video es que cualquiee filtro de 3m sirve para la mascara 6200 gracias
Can you disinfect and reuse P3R 6035 Particulate Filters? I have several of them, bought before the Coronavirus outbreak, but if I had to replace them all the time - eg. after going grocery shopping - I'd quickly go bankrupt with current filter prices in my country.
Here is a link to the 3M document on doing just that.
multimedia.3m.com/mws/media/1793959O/cleaning-and-disinfecting-3m-reusable-respirators-following-potential-exposure-to-coronaviruses.pdf
@@bobp4036 Thank you!
using it for covid-19 protection when I go outside. I look like Scorpion of MK
Knk polis buna sıkıntı çıkarıyor mu
@@pansub5626 niye çıkarsın knk iş malzemesi bu normalde. O kağıt ameliyat maskeleri hiç bir işe yaramıyor. ffp3 standartına sahip maske takmak lazım bu onların en iyisi. Fakat hiç bir şekilde maskeye elini dezenfekte etmeden dokunma. Markete girerken taktın, işin bittikten sonra elini yıkadın sonra maskeyi çıkar. Kağıt maskelere göre daha rahat nefes alınıp veriliyor o yüzden 2-3 saat takılı kalırsa rahatsız etmez.
@@aslanyureky sağolasın, kenarda bekliyordu benimki takarım artık
Haha! It actually does make you look like Scorpion xD The first time I put on my 6200 mask and looked in the mirror, I instinctively yelled "Get over here!" xD
...But then I realized that's probably not something I would like Covid-19 to do, so I'll choose Reptile instead... 😆 (And Sub-Zero would just freeze down and preserve the virus for later 🤦♂️😅 So he is not even allowed to participate... 😏)
Yes, I might be a little childish, but I've also been taking this seriously and carefully read all the instructions, done the saftey-checks/fit-testing and learned about how to properly maintain and clean all parts of the respirator 🙂
Really?! Fuck yeah!
What kind of filter series we need for corona virus?
2097 alone would suffice
⸻ how about 2091?
CAN THIS BE USED TODAY?
Go and look at what is on the face of every senior consultant in any hospital.
There was something wrong with etither my mask or the filters I bough, because the filters just wouldn't fit no matter how I twisted, turned and alligned! I was in a hurry and I eventually managed to snap them into place, but before I did that - those elevated plastic pieces on the 6200 mask got a bit damaged and bent... I was supposed to work that day (healthcare) but I didn't want to work while using broken PPE, so I'm staying at home and wait for a new mask to be delivered...😑
Can this be use for Mr.Super Clear spray?
Yes you have to buy the right filter's for it
Yes. Requires N95 prefilter and 6001 catrige (organic vapor) 😊
Hello. How to differentiate between an original 3m 6200 and the chinese fake ones?
Buy from ceritifed retailers. Check the price. This mask should go from 18€+, anything under is suspicious.
@@myi096 thx....
I bought 6300 respirator and 6035 filter for coronavirus :)
6300 is large sized mask. You just exposed your privacy!😊
@@kimjongun5073 Didnt even got it :) It sold out xd :) Maybe ill have more luck with 7502 I also ordered :P
FAZER EM PORTUGUES
is this effectively prevent us from CORONA? Anyone, please tell
perfect for singapore Haze lol
Are you using it right now?
Lol
I won't shave my beard! no way.. I prefer to die.
Clean shaved? NOOOOOOOOOOOOO