XTool S1 In Depth Review and Setup Guide, Material Settings, Upgrades, Fixtures, and More!
ฝัง
- เผยแพร่เมื่อ 1 ส.ค. 2024
- In this video I will take you in depth into getting started with the XTOOL S1 laser cutter and engraver! I will take you right from the unboxing all the way to the complete workflow of processing your first job with XTool Creative Space software. I have many material examples and I share all of my material settings including a tutorial on how to engrave curved surfaces.
XTOOL sent me the S1 pre-release and I've been able to spend a decent amount of time with it. I've been really impressed with how polished the new XTool products are becoming. The S1 is a fully enclosed machine that prioritizes safety and therefore no laser light can escape and it is considered a class 1 laser product. Here is some helpful information about what that means:
► www.laserax.com/blog/class-1-...
The S1 is compatible with many of the XTool safety products such as their fire suppression system and their smoke and fume purifier. It also has some very cool user experience enhancing features like the two point positioning system and the ability to dynamically adjust the focus to engrave curved surfaces. Additionally, you can swap out the blue diode laser for an IR laser module to expand the number of materials you can process.
Haven't purchased your XTOOL S1 yet? Check out the following links:
XTool Black Friday Deals, Save up to an extra $800 off! (Ends on Nov 30th)
► US Store: bit.ly/3RYnpDI ($200 off $2299, CODE: XTCUT200)
► UK Store: bit.ly/46xxuMc
XTOOL S1 40W:
► www.xtool.com/products/xtool-...
XTOOL S1 40W Basic Kit (Includes Air Assist and Honeycomb Bed):
► www.xtool.com/products/xtool-...
XTOOL Smoke and Fume Purifier:
► www.xtool.com/products/pre-or...
In addition to the setup guide, I have also designed and made available several exclusive upgrades related to the XTool S1 (as seen in this video):
S1 Button Cover and Prism Holders:
► embracemaking.com/products/xt...
S1 / F1 Fixture Kit:
► embracemaking.com/products/xt...
S1 to 4inch Hose Adapter:
► embracemaking.com/products/xt...
S1 Hose to XTool Smoke Purifier Adapter:
► embracemaking.com/products/xt...
Check out my other video specifically addressing laser safety:
► • Laser Cutting and Engr...
In the future I will be releasing a video showing how to use the XTool S1 with the RA2 rotary module. You will find that here:
►
If you are looking for products or items I've used with the S1 Pro in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
4" Inline Duct Fan:
► amzn.to/44SzkWN
Electric Screw Driver:
► amzn.to/3MFMkIJ
Electric Air Duster:
► amzn.to/3FZQAPE
If you want to go more in depth with the XTOOL Creative Space Software, check here:
► support.xtool.com/hc/en-us/ar...
Always remember to practice proper laser safety. These lasers can seriously harm you directly (your eyes) or indirectly (your lungs and health). ALWAYS wear your safety glasses! By-products from processing certain materials can be toxic and harm you. DO NOT CUT vinyl materials like PVC. Check this list for hazardous materials before cutting something:
► wiki.atxhs.org/wiki/Laser_Cutt...
Thank you @xToollaser
0:00 Intro
1:44 Unboxing
3:35 Assembly
8:15 Wood Engraving
17:34 Through Cut
21:38 Scoring
24:03 Upgrades
26:36 Fixtures
39:27 Curved Surfaces
43:50 Review
45:36 Outro
#laser #fume #filter
****************************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com/donate/?hosted...
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► / embracemaking - วิทยาศาสตร์และเทคโนโลยี
![หมานแต่ผัวเขา - แสตมป์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/m0g1TSBJPgo/mqdefault.jpg)
this is the best videos for new user like myself. I had to go through multiple videos to get it going in first round. still don't feel confident. but watch this video few more times, I may become confident.
Just got my first Laser gadget - XTool sent me the S1 and the silk screen printer. I'm a total novice so this tutorial was a godsend. I've watched a few, including their own, and this video of yours is by far the best for a total novice. Thank you
Great to hear! Thank you for the kind words :)
Just unpacked my S1 and this video is exactly what I've been looking for. Great Job! And you might tell XTOOL that I would probably be willing to pay for a set of instructions manuals that are only printed in English ! Keep up the good work.
Thanks! I can pass along the suggestion :)
Awesome review! I'm getting the S1 20w next week. I will be ordering your jigs. Great work.🍻
Awesome! Thank you!
Another awesome video. Keep 'em coming!
Hey buddy thanks! Lot's more on the way... might have to get some recommendations on some little CNC machines to play with
@@EmbraceMaking have you heard of the Pocket NC? Coolest little desktop machine I’ve seen. They’ve rebranded as “Penta Machines” to launch a new product “soon.” Maybe they’d send one to Embrace Making for a video!
thanks for the great video very informative👍👍👍
My pleasure!
You should be aware that the XTOOL Creative Space has been updated very recently. It uses a three point positioning system for circular objects and a multi sided polygonal objects.
Yes I saw the update on their livestream a few days ago. They watch these videos and get ideas ;)
Awesome work as usual! You make working with these machines so much easier. Keep up the good work!
Thank you so much Michael! I always appreciate your support!
Thanks!
Wow thanks for your generosity! Much appreciated!
Thanks for videos! I bought the S1 flange to 4inch adapter and the same 4" inchline fan. When you put it the new S1 flange adapter, do you leave the original fan in there or you take it out? Thanks!
How are the xTool products for creating custom foam cutouts for storage cases?
Great video!! Perfect info.. I did not see your prism holders on your website.. Did I miss them? Thanks!
Thanks! They are sold as a kit with the button cover, see here: embracemaking.com/products/xtool-s1-button-cover-and-prism-holder-kit
Thank you very much.. I sure did not see it... Maybe I do not need to be working with a laser.. LOL @@EmbraceMaking
Could you do pros and cons of the S1 vs F1 as an initial laser purchase?
Well, the first thing I would ask is what do you intend on using your machine for? The F1 is so much smaller - even with the slide extension - that you will be stuck doing small items. If this is the case then I would do the F1 because you get both blue laser and IR laser in one machine. It takes up less space and is easily portable if you want to do things like craft shows. If you want to make bigger pieces like cutting boards or cut out big panels with lots of shapes to assemble wooden designs - then get the S1. It has more power (up to 40W) and you can still get an IR module. The downside is that it takes up a lot of space and will be way more expensive especially if you want to work with deeper pieces (you will need the frame extension even if you want to use the rotary). That being said, if you have the space and the money, and you invest in something like the S1 upfront then it will take longer for you to grow out of it.
can this machine cut acrylic cake topper?
awesome video thank you! Im just about to order it the 20W version. According to the site it cuts 10mm wood easily. So I would use the machine for precise cutting of wood (mainly ~6mm thick for my projects). A little nervous now given your cutting chapter of the video, and that I don't see much S1 20W cutting in any review vids! Nothing over 3mm... Do you think it can cut 6mm wood like basswood/baltic birch plywood? That would be my main need for this machine so im trying to confirm that capability before purchase
You're welcome! The bamboo I was cutting was roughly 15mm thick so its considerably thicker than 10mm... Also I'm wondering if the bamboo has lots of glue or something to bond it all together and that might be the issue? What type of wood will you use? If you do end up getting one I would be super appreciative if you used the affiliate links in the video description, there's also a $200 discount code in there too :) thanks!
I'm just learning about these machines but wouldn't it be better to get the 40w and dial back the power instead of worrying if your 20w had enough power?
@@FounderOf4 not necessarily, depends your needs. at 40W your laser beam is slightly thicker. Plus I would mainly be using it to cut under 10mm wood, so no need in 40W. im gonna get the 20W and then save up abit more and get a C02 for next upgrade likely p2
@@proudcanadianeh4663 thank you for the education. I didn't think about the size of the cut, but I understand what you mean.
I very much appreciate reply.. looking forward to learning more about the hobby before I make the big purchase.
@@FounderOf4The 20 watt laser has a slightly smaller size of the laser spot which allows even better resolution for very fine lines.
How many lines per cm was the engraving on the basswood?
100 lines per cm for each of the examples. I believe this is the "default" setting based on many of the XTool reference settings that I've looked through. Anything less and you start to notice the lines
Im not a big fan of having to move the gantry manually.
How does this handle black hard anodized parts?
Do you want to be able to jog the machine while in the design screen? I'll see if I can find a true hard anodized part around here... I had some things made a long time ago that I know are real hard anodized... if I can find them I'll throw them under the laser and find out
@@EmbraceMaking I mean for setting your corner points. Ive never done that with my plotters or CNC router/engravers. I looks "wrong" to me. Thank you sir! BTW youtube doesnt always let me know when you post things. Been a big fan ince I bought the tire tool from you. Keep at it my dude.
I honestly was 100% clueless that is what they were directing. Needing to do that was just completely foreign to me. I wish their "How to" after assembly was 1/2 as good as the assembly manual.
The fire suppression feature is not included but at a high price. The air purifier alone can break up
Yes the fire suppression kit, air purifier, etc are all extra from XTOOL. They sell some different bundle options to get a slightly better deal if you buy things together - but the base S1 does not come with these extras.
Mine machine doesn't show the marking
how big is this machine? dimensions?
30" wide, 22" deep, and 7" tall ... if you use the hose sticking out the back you'll need a few extra inches away from the wall to allow the hose to come out and bend 90 degrees.
no one ever mentions the sd card
Does the x Tool S1 come with the software?
The xtool creative space software is free - download from their website :)
Yeah, this makes me want to sell my Glowforge machine and get this.
xTool supports their machines for less than 2 years. Go to their website and look for parts or modules to fit their D1 and D1 Pro models, which they were pushing heavily last Christmas. ALL parts are "out of stock"and have been for months. The only available replacement module is the $1,200 40w module for the D1 Pro.
No matter how innovative or enticing their technology is, it is worthless if it gets bricked after 2 years (or less), due to no available parts or modules.
Live rust video
The problem with videos made by people that receive the laser for FREE, is that they're only useful to see what the laser can do, not for your conclusions.