Suzuki Intruder 1400 Clean The Carbs Without Removing Them
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- My Email For Sponsorship Offers Hungrydansgot2eat@gmail.com
The Official I Fix Shet Facebook page To ask questions and Receive help or just partake in the group activities
www.facebook.c...
PayPal ID Email For Donations If you feel so inclined to support what I do.
Hungrydansgot2eat@gmail.com
My Email For Sponsorship Offers Questions Or Pay Pal Channel Support
Hungrydansgot2eat@gmail.com
Buy me a coffee with CashApp ☕️
cash.app/$Droneworship
MERCH STORE
my-store-385191.creator-spring.com/
The Official I Fix Shet Facebook page
To ask questions and Receive help or just partake in the group activities
facebook.com/groups/631191488517301/?ref=share_group_link
Q
A
If you have a carburettored motorcycle, always turn the fuel off and let it idle till it stalls out, its a good way to help stop the fuel going all gluggy inside the carburettors and the float bowls, and can potentially extend the life of the carbs, another good piece of advice is always check the fuel condition inside the fuel tank, especially iff the bike has sat for a long period of time before starting it.
Any fuel additives you’d recommend to help as well?
Dude!I got my bike running and and she runs EXCELLENT due to this video.Pilot jets both completely sealed up,sand like dirt in float bowls,completely clogged drain holes.Was acared to move on to front one but got her done.
THANKS AGAIN FOR THE VID,I OWE YOU A BEER 😂
Well if you feel that strongly about it I always accept donations for my free information I offer 😉
Buy me a coffee with CashApp ☕️
cash.app/$Droneworship
MERCH STORE
my-store-385191.creator-spring.com/
The Official I Fix Shet Facebook page
To ask questions and Receive help or just partake in the group activities
facebook.com/groups/631191488517301/?ref=share_group_link
@@IFixShet done!
@macmobilestudio holy cow man that was way more than I expected some days we are humbled by others these are one of those days for me. You have my gratitude sir thank you
@@IFixShetabsolutely the VERY LEAST I could do.Thanks again
Hey I couldn't post again for a couple days for some reason but I don't know if you noticed I donated again on the same day so you got some more money on your cash app
Thank you soo much, so far I cleaned the rear carb. Pilot jet was clogged, front carb to be continue. But i have to say it was very easy and just by cleaning the rear carb alone makes a whole difference in how the bike idles. So thank you soo much and god bless.
No problem I'm glad the video helped
Im trying to pluck up the courage to clean my 94 1400 intruder carbs getting backfire and surge flooding aswell it's only done 20 thousand miles.wish me luck before i gogo
You should do a video showing how to synchronize
This video was a big help got my Intruder runs great after a carb clean
Awesome
Excellent video I never even considered doing my carbs without removing them but I’m glad I did! She runs great now after sitting 3 years haha they looked about as bad as yours did.
Glad I could help 😉
Cool gas dispenser reminds me of a time a fuel pump went out I had to make an iv bottle of gas to get down the road
Rebuilt mine using the same process. Saved a lot of time and hassle.
It definitely simplifies things for sure
Hey DW I repair a lot of two stroke engine and never seen inside a motorcycle carburetor. Thanks for sharing 👍🙏👍🙏👍🙏
good commentary and great camera work! Great job
Awesome video in every step and the explanation to what and why , you need a tripod for your camera to free up both hands. Peace. This bike has been sitting around for a long time but still you have a pretty good find., love this make and model, easy owner maintenance and will last forever.
Depends on how I'm feeling I normally strap my GoPro to my head but when I'm trying to get close up shots and be able to work with my hands I need to be able to move the camera around not have it on a tripod it can be frustrating filming this type of stuff for people especially when all the stuff is hidden underneath bars and other things putting a camera on a tripod and putting it in front of you while you're trying to work makes things very difficult
I inherited my dad’s 2003 1400. Only has 994 miles but has sat for over 3 years. I dumped the tank, new plugs, new battery but I can’t get it to fire. Fumes smell like the varnish I dumped out of the tank. Thanks for this video man. Hopefully I can duplicate what you did. I’m not a carb guy but I guess I’m going to learn on this bike. Haha.
Did you film doing the front carb?
If it smells like varnish you definitely need to clean everything thoroughly matter of fact I would remove the carbs and have them brought in and serviced
I did not do the front carb on camera it's the same principle
@@IFixShet so you’re advising to not use your method in the video to try and clean them first?
@twodogs257 based on what you said how about varnish that would lead me to believe that there's a lot of internal lines and stuff inside the carb that will need to be deep cleaned due to corrosion and varnish buildup. In my humble opinion I would suggest removing the carbs and taking them to a shop for Servicing. Sitting gas becomes varnish which obviously is the ethanol content damaging the internals of the carbs. My suggestion to you would be to have them service properly. If there was just a little gas in there and it still smells gassy but it's been sitting for a small period of time then I would say give them a shot at cleaning
@@IFixShet Roger that man. Tis better to it right the first time!
Всем Интрудероводам у этих мототоциклов идёт заводской аккумулятор с пяткой короб надёжжно держит его, поэтому делайте самодельные крепления на аккумулятор чтобы он не прыгал в коробке и следовательно не сыпался и не перегорал Реле-регулятор зарядки.
This is pretty smart. I'm gonna try going the same route.
Just be gentle do not pull hard on things. The biggest mistake people make is they pull it out and then they start wrenching the thing in all sorts of different directions putting tension on the cables. just be gentle
Would you recommend a fuel additive to prevent this at least a little or prolong the time between cleanings??? Thank you!
Hows this bike coming along? I Just got a 2000 1400VS Intruder, I think this vid will come in handy, I did the same type cleaning on my Marauder, I was able to access everything while still attached
Lube the clamps with p b blaster so the screws come out so you don’t strip the screw
I'm doing that right now 😆wish me luck
You got this bro I have faith in you
their is really no substitution for pulling the carbs and running them through an ultrasonic cleaner. beats having to clean them again if it isnt done right. and really its easier to take it apart on a bench with good lighting. setting the float height. Its really not much more time to just do it right.
OK well mine sat for a number of years and a quick cleaning and driving down the road with no issues I would only pull them And have them cleaned if necessary Don't create more work for yourself unless you absolutely have to. This method literally takes 25 minutes to figure out if you need to Send your carbs off or not
Work smarter not harder
Grazie il tuo video è stato di grandissimo aiuto👍
Turn on compressor take hose connect the hand held blower and Blow all the trash out of the spray it a couple times, then you know you did it the Right way
No thanks I have blown seals out this way.
At timestamp 12:14 I have never seen green build up like that
Dan, have you ever seen that before?
Just regular ethanol damage
Great informative video, thank you so much 👍
Thank you
Great to see your not fluffing about lol... Vrooooooom
Why put off tomorrow what you can do today? 😝
@@IFixShet makes for more views if you drag them out lol
Do you have a video for the front carb.
Nope
Is the marauder 800 the same as the intruder?
Random question was your choke down by the seat or up on the bars, looking to replace my dads and i keep seeing conflicting places on year ranges.
If I remember on this one the choke was by the seat
What is the chrome cover next to the key switch? I have a 92 and 96 and neither have whatever that is.
That's a good question I have no idea man
Did you ever get it running?No part 2?
No part 2 because one of the cylinders on this bike was dead. Yes I got it running but one cylinder only had 20 psi it wasn't worth pulling the jugs and replacing the parts I paid so little for the bike
@@IFixShet oooh that would be a good first step.Checking compression first before attempting to clean carbs Bike does exactly as this one and I know gas is bad when I drained it it reaked 😂
@@macmobilestudio I mean I trusted the person I bought it from who said it had good compression because I've known them for a while so I didn't feel it was necessary
@@IFixShetHey man I just got my rear carb all cleaned yesterday afterwork thank to this vid.Pilot jet gummed up solid.Soaked in Berrymans B12 and cleared the jet.All slimy and gunky.Drain screw wouldn't even drain due to all the gunk.Now on to the front carb thanks!
Thanks!
No problem
Great Video
Thank you
Should i buy one that needs “carbs” cleaned? Im buying my first bike pre owned and dude listing it says it needs battery new tires and paint plus ofc the carbs cleaned only 800$ what yall think
How many miles was on it? And how long did it sit? I got a 95’ that’s sat 10 years, tank was off, and stored indoors
Merhabalar ustam ben bu Suziki intruder motorsiklete özel monifolt ve karbüratör yaptım çok düzenli oldu çalışması gidişi onnumara oldu eğer düşünürsen yaptğım projeyi sana video olarak atarım anlatırım
Hi i was thinking about installing smaller air filter k&n's like what do you think?
I think you will have to rejet your carburator And tune it after you're done
sure you know this already but If she’s still running good sticking with the factory set up will save you a lot of headache.
You got a great bike but you know that 😁
True that!
Heyy, is it same process for a suzuki marauder 1998?
No idea man every bike is different
@@IFixShet hello, i just did it and it’s the same processes as the intruder, the only difference is the difficulty to remove the carbs because of the tightness
Excellent I'm glad it worked
@@IFixShetmy muffler still pops when i let go my throttle tho, probably seafoam will help fixing the issues 🤷♂️
@@mohamadali.h4754 So here's an easy thing to remember if you have backfiring out of the exhaust type it means that 1 of your cylinders is running rich or both if you have popping coming out of your carburetor that is a lean factor. So for whatever reason your bike is getting too much fuel the raw fuel is making it out of the exhaust and then igniting at the end of the tip
I need help
I can see that
Nicee!!!
Thank you! Cheers!
I rebuilt my wife in roughly the same way....
Ur video only goes half way
Yep we didn't make part two because the engine was toast