How to Remove and Replace Rear Bumper on VW Jetta MK5
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2016
- How to Remove and Replace Rear Bumper Cover on VW Jetta MK5
► Our Website for Tools, Parts and more Videos: mechaniclifestyle.com
In this video we are going to show you how to remove and replace the rear bumper cover on a VW Jetta MK5 A5. It will cover years from 2005 to 2010.
It is not very complicated procedure but it is time consuming because you have to do some extra work like removing the tail light.
Make sure that you WATCH the whole video because otherwise if you try to pull the bumper cover and you have not removed all the bolt you might brake the side bumper brackets.
This procedure should work on:
2005 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
2006 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
2007 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
2008 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
2009 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
2010 VW Jetta MK5 A5 Rear Bumper Cover Removal and Replacement
► 2ND Channel Subscribe: bit.ly/2a86p9Z
►►Honest Product Review Channel: bit.ly/2ygqUcy
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► Ford Fiesta ST BUILD bit.ly/2a59UKp
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► Social Media
Instagram: / worldmechanics
FACEBOOK PAGE: / worldmechanicsofficial...
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics. - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Great video. My wife hit a pipe on the road with her 2008 Jetta and it popped off the bumper cover behind the tire. I watched this video then went and removed all the connectors on that side and popped out the inner part of the bumper, reattached the cover, and put it back together. She thought she would be without the car for a few days at the body shop and I fixed it in an evening. I would have never found that additional bolt on the other side of the taillight. Thank you for giving the Torx sizes as well.
Welll made, easy to understand and comprehensive guide. Especially handy how you displayed each screw you took out. Thankyou
Thanks for your videos, I recently got an '07 Jetta that had a lot of minor issues(cosmetic). Good strong car though mechanically, I have been fixing and restoring all the neglect including a saggy rear bumper which this video made a breeze. I need to replace a cracked rear tail light next. Thanks again.
Great video guys!!
Aiight bro nice vid..I'm headed to the junkyard right now to get one off
This video is awesome! After removing the bumper, one piece falls to the ground at minute 10:30. What is it? Looks like a metal bar.
Thanks!
спасибо за видео
hello hello WM..nics thanks for that video. It helps a lot during work.
Best wishes!
Great detailed video, thank you !!!
Not bad. These guys discover the bolts as they go. I had the irresistible urge to give them an impact gun but besides that it was okay
Хорошее видео.Все ждал когда ж хоть по русски слова скажет. Акцент выдает )) Лайк. Ждал может с правой стороны покажете после снятия. Мне б увидеть там. А то вчера сдавал задом и не заметил высокий блок. В итоге подмял с права кронштейн крепления бампера и нос выхлопной трубы. И сдвинул выхлопной трубой еще железяку от кузова и в итоге локер задний трется об колесо.Вот думаю как править. Слега оттянул руками но дальше не хватает сил.
very explanatory. thank you so much!!
Could you show how to remove the liners inside rear fenders?
what size is the bolt under the carpeted panel?
Thanks bro helped out a lot, good video
VER GOOD
Thank you for great video! Does anyone knows if the rear bumper has inside drilling hole marks for the parking sensors?
great video PLZ shows how to do coolant flush in this model
What a pain in the @ss! Damn vw and 700 different fasteners and tools to remove a damn bumper. Thanks for the video, helps out a lot
How do i take out the spoiler on that car?
Just take off the screws from the top underside of the trunk
so many screws lol
I watched this video just to figure out what kind of tool to use to remove the last two screws inside the truck to release the bumper clip...every other screw is called out and shown, except the one I need to see...
It’s the T32
did you grow up in russia with irish parents or vice versa? your accent is awesome
and thanks for the video sir
My bumper got ripped off and is now missing like most clips how could I replaces those lmao
Buy em online if you haven’t
Overenginering at its finest.
Most fucking idiotic car that I have ever owned. When VW started to assemble them in Mexico, thats when you know VW is not das auto anymore...
But great video guys, thank you!
Can you speak less please….